Ltf2940fs1 Frigidaire Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134816500
$1.93
- Compare At:
-
$2.12
- You Save:
-
$0.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134994200
Secures washer panels and trim to prevent rattling and maintain alignment. Replace when worn, broken, or missing to restore stability. Confirm fit with your model.
More
$8.70
- Compare At:
-
$10.27
- You Save:
-
$1.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131763310
Washer door strike ensures proper door closure and sealing during wash cycles. Replace if door won't latch or seal. Verify fit with your model number.
This part fixes the following symptoms
-
Door latch failure
-
Door won't close
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Door latch broke Paul C. • Sun City West , AZ • May 21, 2025
Ordered it, installed it.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051003
The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.
Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.
Symptoms of a faulty Drive Belt include:
- Loud squeaking or grinding noises during the wash cycle
- The drum not spinning or rotating properly
- Slipping or failure to agitate during wash cycles
- Excessive vibrations or shaking from the washer
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No error codes; just lots of noise and movement James S. • Winchester , TN • April 29, 2023
After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134366400
This is the clear glass panel mounted inside the washer door that allows you to see your laundry during the wash cycle while creating a seal that keeps water inside the drum. It sits within the door frame and is held in place by the inner and outer door panels. Replace it when the glass is cracked, chipped, or shattered, which can cause leaks or pose a safety hazard.
Do-It-Yourself Stories from Customers like You
The inner glass in the front door was broken during normal use of the washing machine while doing a fairly light load. Chris M. • Sparks , NV • March 31, 2014
I ordered the new inner glass which arrived overnight, I was very surprised and elated with the delivery time. I took the door apart and replaced the glass which was an exact replacement for what I had. Did a load of wash to check for leaks and found the washer to be as good as new. Thank you for the quick delivery and quality part. Chris
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137518800
Do-It-Yourself Stories from Customers like You
Wouldn't spin at first then no activity at all e23 code Levi G. • Wytheville , VA • March 06, 2017
We had a power surge that tripped the washer breaker. It showed an E23 error code so I replaced the main control board (part number AP4362398.) All washer activity back to normal except it still wouldn't spin and still had E23 code. I removed the tub to pump hose (part number AP3837322) to find all sorts of goodies inside such as underwires from bras, a quarter, nickel, penny, and dime stacked perfectly on top of each other inside the filter, and tangled yarn from a rug. Ended up replacing the...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134472202
The Door Handle is an OEM replacement part for Frigidaire washing machines and dryers. As the component used to open and close the washer or dryer door, the handle plays an essential role in user access and operation.
Causes of a bad handle include broken or cracked plastic due to excessive force or repeated slamming of the door, as well as normal wear and tear over extended use. Failures in the handle's attachment hardware or mechanism used to interface with the door's lock can also occur.
Symptoms of a bad handle include:
- The handle breaking off the door entirely
- Difficulty turning or rotating the handle
- The handle hanging loose and not engaging the door lock
- Sharp or rough plastic edges presenting a safety hazard
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
This part fixes the following symptoms
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Broken handle Wayne D. • Glendale , AZ • January 10, 2015
Replaced with new handle, about five minutes.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134362800
Do-It-Yourself Stories from Customers like You
No error codes; just lots of noise and movement James S. • Winchester , TN • April 29, 2023
After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134347700
This small pin secures the program selection knob to the dryer's control panel shaft. Replace if the control knob spins freely without changing settings or falls off the control panel.
Do-It-Yourself Stories from Customers like You
My firgidaire front loader dryer had a code and won't work Stanley N. • Longwood , FL • June 03, 2017
THANKS TO Wendy and Hannah both were extremely helpful with this order. I receive the video from Hannah to see what the code meant and the parts (Wendy help my to get) were exactly perfect in completing my problem with my dryer. Wendy said 1 to 3 business to receive the control board and she was right. The dryer is working just great now. Thanks for all the help, I will be using your company again when the need arising again. I will tell any who will listen to me how great you are!.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134471500
Genuine Frigidaire part
By: Frigidaire
Part Number: 134349400
Genuine Frigidaire part
By: Frigidaire
Part Number: 134362200
Genuine Frigidaire part
By: Frigidaire
Part Number: 134372100
Do-It-Yourself Stories from Customers like You
Would not go through rinse cycle Donald S. • Cloudcroft , NM • July 31, 2015
Replaced the water valve assembly. did not really need the dispenser part. problem mainly caused by hard water buildup where the hose connects. also replaced the hoses as they also had some hard water buildup.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134386200
Genuine Frigidaire part
By: Frigidaire
Part Number: 134386500
Genuine Frigidaire part
By: Frigidaire
Part Number: 134408700
This clip is a genuine General Electric part, sold individually. It can be used as a replacement part for a dryer or a washer/dryer combination appliance. This clip affixes the toe panel to the front panel of the dryer.This clip could become damaged within the standard lifespan of a dryer; this damage could take the form of nicks, scrapes, tears, punctures, or erosion to the plastic material that reduces its functionality for a dryer. If the toe panel is coming loose from the front panel of the dryer, the clip should be visually inspected and assessed for signs of damage. If the clip is damaged, it should be removed and replaced with this genuine OEM replacement part. The replacement process is simple and will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This clip is compatible with the following appliance brands: Frigidaire, Kenmore, Electrolux, Westinghouse, and Crosley.
Do-It-Yourself Stories from Customers like You
The dryer not heating up. Anthony C. • Pleasant Valley , NY • August 07, 2021
Replaced heating element, thermostat, control thermistor, and belt, ordered grease and greased bearing, so far so good.
Read more
More