Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lwmt72uv Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001554

Fix washer overflowing or not stopping fill cycle. This water level pressure switch senses tub water and signals control to stop filling. DIY repair.

Do-It-Yourself Stories from Customers like You Tub was overfilling and water would not stop until machine turned off replaved water level valve but did not solve problem   Kirk N. • Oak Island , NC • April 19, 2014

Filled tub to about 6 inches and inspected washer. Noticed that the tube leading from the air entrapment bubble on the exterior side of the drum had a small leak in it. Clipped off the part of the tube that had the hole in it(it was very close to the connector nipple) reconnected and problem was solved. Read more

More
$118.53

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002917

Specs: No.8X1/2 HEX WASHER HEAD

Do-It-Yourself Stories from Customers like You Control board shorted out during drying cycle with a series of loud popping noises creating a blackened corner of the dishwasher door a pungent electircal fire smell and tripped circuit breaker   Charles L. • Concord , MA • November 01, 2014

Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Retaining Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP25-7854

This retaining ring secures a component on a shaft or within a groove so it stays aligned during operation. Replacing a bent, rusted, or missing ring helps stop wobble, noise, and parts working loose.

  • Locks into a groove to keep gears, pulleys, wheels, or spacers from sliding off a shaft
  • Helps maintain proper spacing and alignment of moving parts
  • Common signs of failure: wobbling parts, scraping/rubbing noises, or components that work loose
  • Visual clues: deformation, corrosion, or loss of spring tension
What's included: 1 retaining ring Install notes:
  • Disconnect power and any utilities to the appliance before service
  • Wear eye protection—retaining rings can spring free under tension
  • Note the order/orientation of any washers or spacers before removal
  • Use appropriate snap-ring or needle-nose pliers and ensure the ring seats fully in its groove

Do-It-Yourself Stories from Customers like You Maytag washer was making a squeaking noise during the agitation cycle and when it stopped it squeaked louder   Jeff S. • Bradenton , FL • January 02, 2019

I took the machine apart and installed a new brake rotor , Brake stator and a snubber ring, after the install the machine works great and no more squeaking. I will say one thing about AppliancePartsPros.com that when I first received the order the brake rotor was new in the sealed bag but the brake material wasn't attached to it, customer service was helpful and sent me a new part the next day. I will use this company again. Read more

More
$7.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Nut
Genuine Whirlpool part

Nut

By: Whirlpool
Part Number: WP3400029

Size: 10-32

Do-It-Yourself Stories from Customers like You The heating elements were not working, but there was power on the control panel.   Miroslav R. • Petaluma , CA • May 08, 2020

Check the power cord connection to the stove and found burned cable due to loose connection. Replaced the terminal and the nuts and installed a new power cord. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (12-14 X 1/2)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP27001200

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

  • Secures panels, brackets, and internal components to their mounting points
  • Replaces damaged, rusted, or missing hardware
  • Helps stop vibration and rattling caused by loose fasteners
  • Restores proper alignment and stability of covers or assemblies
What's included: One screw Install notes:
  • Disconnect power and, if applicable, shut off gas/water before servicing
  • Match the original screw's location and length; replace one at a time
  • Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
  • Reinstall any original washers, clips, or spacers used with the screw

Do-It-Yourself Stories from Customers like You My pump belt broke   Steven H. • Harleysville , PA • June 15, 2015

This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Hex Head Sheet Metal Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12990527

Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Spring Hook Tool
Genuine Speed Queen part
By: Speed Queen
Part Number: 321P4

Spring hook tool for removing and installing washer suspension and drum springs. Needed when replacing worn or broken springs during tub service work.

More
$15.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Dryer Panel Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002933

Replacement screw secures panels, brackets, and trim on washers and dryers. Replace missing, stripped, or damaged fasteners to restore proper fit.

More
$7.18

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Cabinet Top Clip (Cabinet-Top Retainer), 1 Each
Genuine Whirlpool part
By: Whirlpool
Part Number: WP25-7220

This cabinet top clip is a small plastic retainer that secures the appliance's top/cabinet to the chassis, keeping the cabinet aligned and preventing movement or rattling. It restores a flush fit between the cabinet and body. What it does:

  • Secures the top/cabinet panel to the appliance frame so the cabinet stays in place
  • Prevents the cabinet from shifting, vibrating, or sitting unevenly
  • Helps stop gaps that can let dirt or moisture into cabinet seams
  • Common symptom: loose, rattling, or misaligned cabinet top or trim
What's included:
  • One cabinet top clip
Install notes:
  • Always disconnect power before servicing the appliance
  • Remove necessary trim or panels to access the cabinet clip; a screwdriver or trim tool may be needed
  • Replace broken or worn clips with matching parts only; inspect surrounding fasteners for damage

Do-It-Yourself Stories from Customers like You After moving the washing machine to our new house water dripped into tub with machine off   Stephen B. • Germanton , NC • January 11, 2017

I replaced the fill valve assembly with a new one. Had to look carefully at the parts diagrams to make sure I ordered the right one since the serial number break old vs. new didn't seem to match the number on my machine. On this particular machine you don't need to pull it out too far from the wall-leave the hoses connected to the valve, remove the screw holding the valve bracket, and pull into the washing machine where you can easily access the hose ends. A putty knife is needed to open... Read more

More
$4.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Air Conditioner Remote Control Assembly
Genuine Lg part
By: Lg
Part Number: AKB73795706

Fix an unresponsive air conditioner remote with this complete control assembly. Restores infrared signal transmission and button functionality.

More
$44.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001065

Size: 10-24 x .50 HXNI.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308544

10-24 x 1/2 inch mounting screw for securing appliance panels, handles, brackets, and internal components. Replace lost, stripped, or damaged screws.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Control Knob (White)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP36701W

This is a white rotary control knob that attaches to the dryer's selector or timer shaft, allowing you to choose cycle settings. It fits over a D-shaped shaft and snaps or pushes into place. Replace this knob if it is cracked, broken, or the shaft grip has worn out so the knob spins without engaging the control.

Do-It-Yourself Stories from Customers like You Couldnt change water level setting   Stephen K. • Saint Joseph , IL • March 12, 2014

Replaced water level knob Read more

More
$36.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Stabilizer Bracket (Support)
Genuine Whirlpool part
By: Whirlpool
Part Number: 35-2046

A stabilizer bracket that secures and supports internal components to reduce movement and rattle during operation. Helps restore stable alignment so the appliance runs quieter and more reliably. What it does:

  • Provides structural support to help keep assemblies aligned and reduce excessive movement
  • Dampens vibration and minimizes knocking or rattling noises tied to loose components
  • Restores proper fit where a worn or broken bracket allowed shifting or misalignment
  • Works as a repair for symptoms like intermittent noise, excess vibration, or parts that sag or shift
What's included: Stabilizer bracket Install notes:
  • Disconnect power (and water if appliance-specific) before beginning any repair
  • Basic hand tools are usually required; refer to your model's service manual for exact steps
  • Inspect surrounding parts for wear while replacing the bracket

Do-It-Yourself Stories from Customers like You Severe vibration during washer spin cycle.   Robert G. • Richmond , VA • January 15, 2018

I followed the Appliance Parts Pro's advice videos for the Maytag MAV6451AWW Atlantis washer on replacing the snubber ring and the suspension springs. Everything went just fine except replacing the two rear most suspension springs. None of the videos illustrated REINSTALLING the REAR springs which is extremely difficult because you can't get enough leverage with your arm extended. Observing my frustration, my wife recommended taking off the back side. You can't simply take off the back,... Read more

More
$27.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Nut-Lock (Locking Nut), 1 Count
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210385

A replacement nut-lock used to secure fasteners and keep panels or components from backing off due to vibration. Simple, durable hardware that restores a secure connection and reduces rattling or loose parts. What it does:

  • Secures a mating bolt or stud to prevent loosening from vibration or movement
  • Restores a solid attachment for panels, brackets, or assemblies that may come loose
  • Helps eliminate symptoms such as rattling, vibrating, or intermittent panel movement
  • Suitable where a locking fastener is required to maintain a reliable connection
What's included: One nut-lock. Install notes:
  • Disconnect power and follow appliance safety procedures before starting work
  • Locate the matching stud or bolt and remove the old fastener if present
  • Use the correct-size wrench or socket and tighten until the nut-lock seats; avoid over-tightening
  • Inspect threads and mating hardware for damage; replace damaged components

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer   Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Locknut (Threaded Retaining Nut)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY707702

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

  • Secures shafts, pulleys, or fittings to prevent axial movement
  • Keeps assemblies fastened under normal vibration and load
  • Helps stop wobble, grinding, or part separation caused by a loose connection
  • Works with the matching threaded stud, shaft, or fitting for a proper hold
What's included: One locknut Install notes:
  • Disconnect power and follow appliance safety procedures before servicing
  • Use the matching thread size and engage threads fully; hand-start before tightening
  • Tighten securely without overtightening; use the correct driver or socket for the nut
  • Inspect mating threads and replace if damaged

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google