Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement screw that secures the drawer roller to the rail or bracket in your refrigerator. Needed when the original screw is stripped, missing, or damaged.
Popping the old draw glides off was the toughest part of the job, ad even that was fairly easy, once I noticed the little retaining tabs near the front of the drawer. Pushed in on the tabs, while pushing back on the drawer glide rail and it popped right off. One minor problem I did note: When the rollers were installed on the shoulder screws, they would not turn. One roller just had a burr around the inside edge of the hole. The other the entire bore was a bit undersized, creating a snug fit.... Read more
Fixes ice dispenser not dispensing or auger not turning. This motor assembly drives the auger shaft that moves ice from bin to chute. Moderate difficulty.
Replaced the motor, however not the easiest to do with the older refrigerators. First I had to remove the shelf that hold the ice bin. There is a small screw midway underneath the tray. Once removed the shelf is loose but still hard to remove. There is a side panel that is slotted andonce removed the shelf can then be removed, but not knowing that it is a very odd fitting unit. Then comes the unplugging which cannot be seen so it is all by feel. Once the shelf drops down the plug is now... Read more
Broken ice enclosure causing ice jams or warm air leaks? Replace this ice path housing. Moderately easy DIY repair—remove one screw and wire harness.
Upon receipt of part (in 2 days), removed right panel (snapped on). Removed ice tray. Removed one screw holding broken tray. Then removed plug from motor/solenoid. Next, moved motor/solenoid from old cracked tray to new one. All holes aligned exactly. Replaced shelf/motor in freezer, and reconnected cable from motor to freezer wall. Put one screw back in. Then replaced right-side snap-in panel. Finally, slid in ice-tray itself onto the new shelf. Tested okay. Read more
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half. Read more
Side-wall bracket that holds the glass shelf above your crisper drawers. Replace if cracked, broken, or missing to restore a level shelf and proper support.
My Jenn Air JCD2389GES refrigerator had a broken shelf and drawer studs. One of the studs had also broken off much of the side panel. The previous owner tried to use a screw to fix one of the studs. I ordered both the Crisper Shelf Support and screw. Turns out the screw isn't long enough to attach the Support. Since I have a tenant moving in soon I elected to superglue the Support. So far it is holding and working fine. The Support stud has a wider base which provided enough coverage to glue to... Read more
Refrigerator not cooling or humming without starting? The compressor pumps refrigerant to cool your fridge. Requires EPA certification for install.
Replacement mounting screw secures panels, brackets, and trim to the appliance frame. Needed when original screw is stripped, missing, or damaged.
Mounting screw secures panels, brackets, and trim on refrigerators and washers. Replace when fasteners are missing, loose, stripped, or damaged.
Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes. Read more
Secures shelves, panels, and brackets in your refrigerator. Replace if loose, stripped, or missing to restore stability. Verify fit with your model.
Replaced motor, fan and lock-nut. My repair was on a built in Refrigerator-Freezer so most of the time was spent on pulling out and putting back the unit to get to the area I needed to behind the upper top. Read more
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Food freezing or fridge too warm? This temperature control thermostat monitors and regulates refrigerator temperature for consistent cooling performance.
Defrost issues or ice buildup? This thermostat retainer clip secures the defrost thermostat to the evaporator for accurate temperature sensing.
Refrigerator icing up and requiring manual defrost every few days? This defrost heater clip secures the heater to prevent ice buildup. Simple DIY fix.
I purchased the defrost heater assembly from your company with the clip. I removed the back panel inside the freezer compartment and proceeded to remove the old defrost heater from the condenser unit. It was very simple and needed really no tools to complete the job. Read more
Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.
I pulled out the old housing and unplugged the motor. It pretty much came out in pieces. Remove the plastic from the motor, then had to take a pair of vice grips to hold the spindle in place to remove the auger. Remove what was still attached to the old Housing. Cleaned everything up and put the whole unit back together. The motor looked like it was somewhat cooked but still worked, so I ordered a new motor and auger to replace it. Because this fridge is 24 yrs old, Appliancepartspros... Read more
Secures water supply hoses to fittings, preventing leaks in ice makers and refrigerators. Replace when rusted, bent, or losing grip. Verify fit.
Low water pressure or leaking from valve? This refrigerator water valve controls flow to the ice maker and dispenser. Takes about 10 minutes to replace.
Replaced valve Read more