John A Baton Rouge , LA March 12, 2015 Ice stripper was broken on ice maker Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers, Socket Set
Michelle F Hines , OR August 07, 2014 One of the teeth on the ice stripper was broken off Simply replaced the broken ice stripper with a new one. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Adjustable Wrench, Screwdrivers
Michael O Hurricane , WV September 13, 2015 Broken ice striper and missing crisper pan My parts came quickly from Appliance Pros and the only installation I needed to perform was for the ice striper. The ice striper installation was a simple fix and required only a screw driver and was completed with in 15 minutes. Thank you for your help. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Steve G Oak View , CA November 15, 2015 Appliance: Model NEW WHIRLPOOL REFRIGERATOR Brand new ice maker had two broken parts then received from dealer Following your video instructions, I was able to disassemble the ice maker, install the new parts and re-assemble it in about 15 minutes. The repaired ice maker was then installed in the refrigerator, and worked perfectly! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Bill W Albany , OR May 31, 2015 Replace broken ice striper Put ice maker in off position and removed ice maker on/off metal bar. Bar is kind of snug to remove from the end facing you but just push with a little force and it will pop out. Removed the cover that shows the ice maker on/off. Take the 3 screws out and remove the gear box. Loosen the 2 inset screws on the bottom of the black plastic piece that is still attached to the ice maker just enough to get the new ice striper to set in place. Reverse the above actions and your done. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers