Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Holds and dispenses rinse aid during the final rinse to prevent spots and improve drying. Replace if cracked, leaking, or not dispensing properly.
Usually ships within 4 - 14 days
Protective shield that installs inside your dishwasher to guard internal components. Replace if cracked, damaged, or missing to restore proper coverage.
Replacement screw for securing dishwasher door panels, inner liners, and internal brackets. Needed when original screws are stripped, missing, or damaged.
Ordered the part from AppliancePartsPro's, watched the video, new latch works perfect. I've repaired several appliances in my house by diagnosing simple problems going to AppliancePartsPro's diagram's, ordering the part and installing myself. Never had any problems. The bearing in the back of the dryer was tricky but worked great. Keep track of all parts when you disassemble and assemble in reverse order. Taking photos as you disassemble helps for referencing if you get stumped. Read more
Replacement lower dishrack assembly for dishwashers. Installs as the bottom rack to hold plates, pots, and pans. Replace if rusted, cracked, or broken.
Replaced them - loved the videos Read more
Foam insulation strip seals the dishwasher door perimeter to prevent leaks and moisture entry. Replace if compressed, torn, or causing water drips.
About a month ago, a sporadic drip was noticed on right hand bottom corner of dishwasher. Puddle would vary in size but nothing major. My first inclination was to change the door gasket (~$35 at a major online retailer) as this seemed reasonable to me and was a straightforward fix. Next wash cycle, no drip. However the drip returned the wash cycle after that, however this time at a different spot along the bottom of dishwasher door. I then replaced a deteriorated corner door seal (~$17... Read more
This water level switch senses the dishwasher's tub float and controls the water inlet. Replacing a worn switch restores correct filling, helping prevent overfilling or dry cycles that can reduce cleaning performance. What it does:
What's included:
Install notes:
I called and talked to a customer service rep and she helped me troubleshoot the problem and order the correct part. She also sent me the pdf of the repair manual and I followed its instructions to replace the drain solenoid. It was a fairly easy repair. I wasn't sure if I would need the water level control switch, but I ordered it to be on the safe side. Turns out the original is still good. Read more
Redirects spray water away from the door opening to prevent leaks and splash-over. Replace if cracked, warped, or missing. Confirm fit by model number.
After discovering your web site and reading of others issues I ordered a door seal (my old one was a little short on the right side) a detergent door grommet, and the 2 water deflectors ( I decided to cover all the bases while I was at it. Very simple job with the information provided on your web site. I certainly have the confidence to tackle other appliance repair now. Read more
This knob controls the rinse aid dispenser setting in your dishwasher, allowing you to adjust how much rinse aid is released during the wash cycle. It typically has numbered settings from low to high dispensing amounts. Replace it if you can't adjust the rinse aid flow, the knob is missing, or if it won't stay in the selected position.
Was easy to locate exact part needed by inputting model number Received my part in under a week. Great site for parts Read more
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
Note: Check Serial Number for correct part
I installed the door latch assembly and handle. It worked fine after that. Read more
This O-ring creates a watertight seal in your dishwasher's wash or drain system, helping prevent leaks and maintain proper water pressure. Replace a brittle, flattened, or damaged ring to restore a reliable, leak-free connection.
Removed 8 screws that retain inner door to outer door. Removed rinse aid dispenser nut and replaced O-ring around dispenser. Also, removed 2 screws that retain the latch assembly and replaced rubber grommet around latch lever that retains soap dispenser door. Read more
Fix dishes not cleaning or low water pressure in your dishwasher. This nozzle jump up directs water to the spray arm. Easy 5-minute install, no tools needed.
I was able to locate the model number and enter this on the website which gave me an expanded view of all the parts for my model. From this I was able to determine which parts I needed and order them. Customer Service was Excellent for Helping me make the right choices. The parts were cheapest here then any other website I found and they shipped to my home in less than 3 days! Now my dishwasher works like new! Thank You AppliancePartsPro for all your help and getting me the parts I... Read more
Guides dishwasher rack for smooth sliding. Replace this track when cracked, bent, or worn to restore stable rack movement and prevent binding or sagging.
Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly. Read more
Replaced the water injector and seal. Read more