Mdb7100amb Parts

Color: Gray

The Door Latch Assembly is an OEM replacement part for Whirlpool dishwashers. It securely fastens the dishwasher door closed during wash cycles to contain water, detergent, and wash motions within the tub. This dishwasher door switch assembly does not include the handle. It includes two switches and a holder.

Over time, latch components can wear from continual use and lose their ability to lock the door. Exposure to water and detergent may also cause corrosion or cracking.

Symptoms of a bad door latch assembly include:

• The dishwasher door not closing fully or securely during cycles  
• Gaps around the door allowing water and air leakage
• The door popping or opening unexpectedly mid-cycle
• Dishwasher will not start

This Whirlpool part fits dishwashers from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and select Kenmore models.

This switch holder secures a small appliance switch or actuator in the correct position so the control can detect and respond reliably. Replacing a cracked or broken holder restores consistent switch alignment and helps prevent intermittent operation. What it does:

• Holds the switch or actuator steady in the correct position for reliable electrical contact and activation
• Keeps the switch aligned so buttons, door/lid actions, or control functions register properly
• Common symptom: appliance function won't engage or is intermittent when the switch is loose or the holder is damaged
• Prevents further wear on the switch by keeping it from shifting or rubbing against surrounding parts

• Disconnect power (unplug or shut off breaker) before servicing the appliance
• Remove the control panel or access panel to reach the holder; keep small clips and screws organized
• Inspect the switch and actuator for damage while replacing the holder; replace any damaged mating parts

This replacement rack track restores smooth, stable rack movement and keeps the oven rack aligned while sliding in and out. It helps prevent rack sagging, binding, or uneven travel so food and cookware stay level and secure. What it does

• Guides and supports the oven rack so it slides in and out smoothly.
• Prevents racks from sagging, tipping, or binding when pulled forward.
• Restores proper rack alignment to reduce scraping, catching, or loud banging.
• Works with standard oven/range racks that use a molded metal/plastic track system.

• High-level swap: remove the oven racks, unfasten the old track, and secure the replacement in the same mounting locations.
• Use appropriate hand tools and avoid forcing parts; aligning the track before tightening fasteners reduces binding.
• Disconnect power to the appliance or follow the manufacturer's safety guidance if servicing components near electrical connections.

Color: Gray

This electric heating element generates the high heat needed for your appliance to reach operating temperatures, restoring normal heating performance and cycle effectiveness. Use the correct replacement for safe, reliable heat output. What it does:

• Heats the appliance's air or oven cavity so cycles reach intended temperatures
• Restores proper heating when the appliance runs but produces little or no heat
• Helps resolve long cycles or poor performance caused by a failed element
• Replaces a worn or open element that shows visible damage or electrical failure

• One heating element

• Disconnect all power before beginning service to avoid shock or injury
• Handle the element carefully to avoid bending or kinking the tubing/coil
• Verify electrical connections are secure and correct before restoring power

This snap-in outlet connector secures wiring to an appliance control or harness and restores a reliable electrical contact. Designed for a direct, tool-assisted snap fit, it helps eliminate loose or intermittent connections. What it does:

• Provides a secure snap-in electrical connection between wiring and the appliance harness or control
• Restores power flow when a worn or damaged outlet causes intermittent operation or no power
• Prevents arcing and poor contact that can result from loose terminals
• Matches OEM fit for straightforward replacement when the original snap outlet is broken or missing

• Disconnect power to the appliance before inspecting or replacing electrical parts
• Remove access panels as required to reach the outlet; replacement typically snaps into place
• Verify correct orientation and full seating of the connector to ensure a solid contact
• If corrosion or wiring damage is present, replace or repair wiring per OEM guidance

This flexible drain hose routes wastewater from the appliance to the household drain so your appliance can empty properly. Durable, service-ready replacement that restores proper draining and helps prevent backups. What it does

• Carries wastewater from the appliance pump to the household drain line.
• Restores drainage when the original hose is cracked, clogged, kinked, or leaking.
• Helps eliminate standing water, slow drains, and related error codes tied to poor drainage.
• Works with standard hose clamps and common drain fittings used on compatible appliances.

• Always disconnect power to the appliance and turn off water supply before servicing.
• Inspect hose routing and clamps; replace clamps if corroded or damaged.
• Avoid sharp bends and kinks when routing the hose; secure with clamps or ties as needed.
• After installation, run a short drain cycle and inspect for leaks before returning the appliance to regular use.

This door insulation panel fills the oven/dryer door cavity to help contain heat and improve energy performance while reducing noise and hot spots. It's a direct-fit replacement designed to restore proper door thermal resistance. What it does:

• Replaces damaged or missing door insulation to help reduce heat loss from the appliance door
• Helps minimize vibration and rattling noise caused by loose or compressed insulation
• Restores proper clearance between the door inner and outer panels to prevent hot spots
• Supports consistent cooking/drying temperatures by improving door thermal sealing

• Disconnect power (and gas, if applicable) before beginning service.
• Door disassembly is typically required; follow for safe removal and reassembly.
• Handle insulation and any sheet metal carefully to avoid cuts; wear gloves and eye protection.
• Only install the exact part indicated for your model; do not compress or modify the insulation.