Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
I ordered the part from you which amazingly showed up less than 20 hours after I ordered it. I then watched a video you produced about replacing the part. Between those two things I had my dishwasher up and running withing 36 hours of talking to your rep. Read more
Kit includes more than shown on picture. New kit is for both plastic and stainless tubs. Plastic tubs use only the float and the switch stainless tubs use all the parts.
I replaced the float switch. It was an easy enough repair. I didn't have to remove the dishwasher to do the work. The part is accessible from behind the front skirt.The only problem was there is not a lot of space to work in. Getting the fastener off and on requires a stubby nut driver. I used a flexible extension instead. I had to feel for the nut as the bottom of the door blocked my view. A ten minute job and the dishwasher is back in service (for half the cost of my local parts place) While... Read more
Replaced pump and filter. Read more
I verified the door interlock switches and the float switch in the base tub, all verified so I ordered the main electronic board, The board arrived and I installed it and everything is working great. Read more
Replaced gasket. Read more
Bottom
Part I ordered was not the problem. The corners of the dishwasher were loaded with garbage, grease and other foodstuffs. I digitally cleaned out the corners, re-seated the door seal and used a cleaner in the machine. Did two courses of cleaning. Also needed to clean the pump screen and top of the pump. Lots of junk there. All of this fixed the leaking and the junk on the dishes. Hardest part was loosening the duct from the top impeller to the pump. Read more
Ordered the part. Arrived the next day. Took the eleven screws off the door exposing the back of the Soap/Rinse Aid dispenser. Six screws hold it on the inside of the door. Popped off easily. There is a plug that runs from the timer to the dispenser…it's a pain to get off. Use a flat head screw driver. Screwed the new unit in place. Plugged it in. Put the door back together. I accidentally caught the door catch in the door and screwed it together seizing it...so I had to take the top screws off... Read more
These convertible rear rack tines replace bent or broken prongs on the dishwasher's rear rack to help keep plates and bowls upright and prevent shifting during cycles. Durable molded tines restore rack function without replacing the entire rack. What it does:
Replaced it. Read more
Replaced dishwasher door latch assembly. Read more
Tested starter capacitor at 2.16µF. pic: http://s29.postimg.org/e05fufxdz/IMG_20150716_140312.jpg It should be 15µF. pic: http://s29.postimg.org/x3yrasa87/IMG_20150718_112327.jpg Contrary to service manual, capacitor is not accessible behind the toe/kick-plate; it is underneath but all the way towards the rear. To get to it, the dishwasher has to be removed and positioned face-down (drain first, use towels/drop-cloth). Read more
Wet vacuumed to clean and remove water. Replaced broken impeller, lower wash arm and minor associated parts. Washer is working well after repair! Thanks for your fast service!!!!! Read more
Color: Biscuit. Size: 1 qt. can uncut. Enamel paint.