Mdb8969 Parts

This 9/32" ratcheting retainer secures mating components in place, providing a reliable spring-lock connection that resists loosening from vibration. Use it to restore proper fit where the original retainer has worn or broken. What it does:

• Holds shafts, rods, or assemblies securely in position using a ratcheting/spring clip action
• Prevents side-to-side movement and reduces rattling or misalignment
• Commonly replaced when the original clip is bent, cracked, or no longer grips tightly
• Works as a direct-fit replacement to restore intended component retention

• Basic hand tools may be required; handle the clip carefully to avoid pinching
• Wear eye protection—spring clips can release suddenly during removal/installation
• Ensure mating parts are aligned before seating the retainer for a secure fit
• If other fasteners or damaged parts are found, inspect and replace as needed

This user interface housing is the replacement outer enclosure that holds and protects the appliance's control panel and front electronics, restoring a secure, finished appearance and proper button alignment. What it does:

• Provides a stable mounting surface for the control board, buttons, and display
• Protects controls from dust, spills, and accidental impact
• Restores proper fit and alignment when the original housing is cracked, warped, or broken
• Helps ensure buttons and touch elements operate smoothly and reliably

• Disconnect power to the appliance before starting any repair.
• Remove control panel trim and mounting screws to access the housing; transfer switches, bezels, or labels only if explicitly required.
• Handle the display and control board carefully to avoid ESD or damage—disconnect wiring harnesses gently.
• If screws, clips, or seals are damaged, replace them to ensure a secure fit; check that all controls align after reassembly.

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

Color: White

This replacement lid restores the top cover on compatible top-load washers, protecting the wash tub and helping keep clothes and water inside during operation. It provides a cosmetic finish and a working surface for the lid latch and hinge. What it does:

• Covers the washer tub to help contain water and laundry during cycles
• Provides the mounting surface for the lid latch and hinges so the lid opens and closes securely
• Restores the cabinet appearance if the original lid is dented, scratched, or damaged
• Helps prevent accidental access to the tub while the washer is in use

• Disconnect power to the washer before starting any repair
• Use proper lifting technique; lids can be awkward—get help if needed
• Inspect and reuse original hinge, latch, and fasteners unless replacements are provided
• If the lid includes glass, handle carefully and wear eye protection

The Dishwasher Door Seal is an OEM replacement part for Whirlpool dishwashers. It provides a tight seal around the dishwasher door to prevent water, sound, and heat from escaping during the wash cycle. Measuring 71” in length (and stretching up to 75”), this door seal prevents water from leaking out during wash cycles.

Causes of a bad seal can include cracks, tears, or splits that develop due to regular use and age. Damage may also occur from over-tightening of the door or accidental impact.

Symptoms of a bad dishwasher door seal include:

• Water or moist air leaks around the door during a cycle  
• Higher energy bills due to hot air escaping
• Excess moisture or mineral deposits around the door seal area
• Food particles or debris trapped under a torn seal

This genuine OEM Whirlpool replacement seal is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black - Part has been changed to an Access Panel Kit - The toe panel is no longer used.

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

This electronic control board is the appliance's central controller, interpreting inputs and switching power to components to run each cycle. Replacing a failed board restores responsive controls and reliable operation when the unit is unresponsive, erratic, or showing error codes.

• Coordinates timing and sequence of operations for the appliance
• Interfaces with user controls and display
• Sends power to motors, valves, fans, or heating elements as directed
• Typical failure signs: no response to controls, won't start/run, erratic or stuck cycles, recurring fault codes

• Disconnect power at the breaker or unplug before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph connections and transfer wiring/connectors one at a time
• Ensure all harnesses are fully seated; follow the service sheet for any model-specific setup or configuration

This box cover protects and conceals the appliance's electrical junction box, keeping wiring secure and reducing exposure to dirt and moisture. It restores a finished appearance and helps maintain safe electrical connections. What it does

• Shields the junction box and wiring from dust and debris
• Helps prevent accidental contact with live terminals
• Maintains the appliance's original fit and finish around electrical components
• Commonly replaced when the cover is cracked, missing, or damaged

• One box cover

• Disconnect power to the appliance before installing to avoid electrical shock
• Handle carefully to avoid damaging tabs or screw bosses used for mounting
• Use the OEM screws or fasteners; replace missing hardware with manufacturer-recommended parts

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This spacer fits between tank components to maintain proper spacing and alignment, helping reduce vibration and wear. Use this genuine replacement to restore correct clearances and improve stability in the appliance's tank assembly. What it does:

• Positions and separates tank parts to maintain correct alignment during operation
• Helps reduce noise and vibration caused by misaligned components
• Prevents metal-to-metal contact that can cause premature wear or damage
• Restores factory clearances after service or replacement of tank parts

• One spacer

• Designed for direct replacement; use the OEM mounting location and orientation
• Disconnect power and water (if applicable) before beginning repair
• If fasteners or surrounding components are worn or damaged, replace them to ensure a secure fit

Color: White