We use cookies and similar tools for site analytics and advertising. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Lower spray bar had what looked like spaghettis blocking & protruding from holes on top. Upon further inspection found to be some type of fiber. Further, inspection revealed fiber came from rinse arm. Ordered a new spray bar from you, arrived in three days. Clean all including filters/spray bar put all back together ran like new. The time listed below includes troubleshooting and a little head-scratching. Read more
Replaced gasket Read more
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
This dishwasher door seal is used on some Amana, Maytag, Magic Chef, Crosley, Samsung, Admiral and Jennair dishwashers.
Removed old gasket. Installed new gasket. Read more
This manifold mounting bracket secures the gas manifold assembly to the appliance frame, keeping fuel lines and related components aligned for reliable operation. It's a direct-fit replacement that restores proper manifold support. What it does:
Tested starter capacitor at 2.16µF. pic: http://s29.postimg.org/e05fufxdz/IMG_20150716_140312.jpg It should be 15µF. pic: http://s29.postimg.org/x3yrasa87/IMG_20150718_112327.jpg Contrary to service manual, capacitor is not accessible behind the toe/kick-plate; it is underneath but all the way towards the rear. To get to it, the dishwasher has to be removed and positioned face-down (drain first, use towels/drop-cloth). Read more
Front
Ordered upper wash manifold and connecting screw that holds the wash/rinse fan in place. Knocked out the old rusted screw out of the wash/rinse fan and screwed thus in place using the new parts. It took me about 15 minutes (I'm slow) and cost me about $18. Dishwasher is as good as new. I love youtube! Any repair video you need is there waiting for you. 10 years ago I would've no choice but to buy a new dishwasher. Spending $18 and feeling like a champ every time I do the dishes now is a... Read more
First I went to AppliancePartsPro.com and searched my part by model number. Next watched the short "how to" video. The ordered parts arrived in a few days. The replacement part fit precisely. My wife was very happy. Read more
Wet vacuumed to clean and remove water. Replaced broken impeller, lower wash arm and minor associated parts. Washer is working well after repair! Thanks for your fast service!!!!! Read more
Ordered and received the parts quickly. This is a very easy fix. Other posters have said there are 4 screws to remove the old rack adjuster assembly and put the new one on. It was five screws for me. You will need a Torx (star tip) screwdriver. Be sure to also order a new cover. The old one does not fit, even though mine looked almost identical to the new one. You'll also have to take the blue lever that raises and lowers the rack from the old rack adjuster assembly and insert it into the new... Read more
Changing baskets is no-brainer job, as they come complete with all plastics and rollers. Upper slides require removal of the stoppers, but this is easy task, just squeeze them and pull back. After replacing the basket, insert them back. Heating coil is a different story. After chasing Internet for the advise, I found instruction: Remove front bottom cover. Memorize the location of the end of the heating element Unplug the wires and undo the plastic nuts holding element from underneath of... Read more