Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Door hinge pin assembly for dryers. Provides the pivot point for your dryer door, supporting its weight during opening and closing. Replace if bent or worn.
I had to unscrew the old hinges and replace with these new ones. Fit was perfect!! Read more
Short baffle that mounts inside the dryer drum to lift clothes as the drum rotates. Replace if cracked, broken, or missing for proper tumbling action.
Replaced it. Read more
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more
Dryer stopping mid-cycle or not heating consistently? The cycling thermostat regulates drum temperature. DIY-friendly repair, typically takes 30 minutes.
I don't have a multimeter so couldn't check all voltages or resistances on suspect parts. I assumed it had to be the two thermostat units - the thermostat or the dryer cycling thermostat. These were not expensive parts so ordered both and installed both. Very easy to remove back panel and replace with the new parts, making sure the OEM numbers were the same. Put back panel on, plugged back in and it fired right up - time will tell if these were the culprits. Not much left electronics wise on... Read more
I replaced the chute and screen - I am very mechanical and have good tools - it took me less than 30 minutes - would take many people longer but it is a straightforward project Read more
This flat-head screw secures panels, brackets, or trim so they sit flush on your appliance. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, rattling, or shifting components.
6-20 screw secures panels, brackets, and internal components. Replace stripped, missing, or damaged screws to restore proper fit and eliminate rattling.
Ordered a kit with new belt, rollers and idler pulley. Used instructions in kit, YouTube videos and instructions I found under the console of the dryer. Found that the idler pulley had frozen and that the belt was nearly worn through. Repair it self was not difficult. The problem I had was in hooking the new belt around the idler pulley. It was solved by removing the one screw holding the air discharge tube and sliding the tube rearwards. This allowed me to get my arm in behind the idler pulley... Read more
Holds the dryer bulb and provides electrical connection for interior lighting. Replace if cracked, heat-damaged, or causing flickering lights. Confirm fit.
Replaced with new from Appliance Parts Read more
Fastener secures panels, brackets, and internal assemblies in washers, dryers, and refrigerators. Replace stripped, missing, or worn screws.
This motor connector housing is the molded body that holds the motor's wire terminals for a secure, insulated connection. Replacing a cracked or heat-damaged housing helps restore reliable motor operation and prevent intermittent power issues.
This relay is used on multiple types of appliances: Ranges, Cooktops, Wall Ovens, Washers and Dryers.
Troubleshooting was non-trivial. After determining the front-panel switch was not the problem, had to pull the unit out of the countertop slot, pull the top of the stove off to get to the relay area. Then swapped wires between suspected faulty relay and a relay that was still 'clicking' to confirm the fault. Then put everything back together so we could eat until receipt of the new part. Then take the top back off, install the new part, button everything back up. Read more
For mating terminal use [AP31136300].
Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more
13 oz. enamel spray paint in biscuit color for appliances. Restores scratched, chipped, or discolored surfaces on refrigerators, dishwashers, and more.
Purchased bisque spray paint. Product is "almost" a perfect match as color of refrig; was not as glossy but did the trick. Read more
Secures dryer wiring to the cabinet to prevent rubbing and interference. Replace if your wire retainer clip is broken, missing, or damaged.
With my bare hands and the help of my son. Read more
This motor base is the replacement support that secures and positions the dryer motor assembly, helping restore stable alignment and minimize excess noise or vibration during operation. What it does: