Med7900sq Parts

This cycling thermostat monitors the air temperature inside the dryer drum and signals the heating element to turn on or off to maintain the correct drying temperature. It is typically mounted on the blower housing or exhaust duct. Replace this thermostat if the dryer is not heating, overheating, or shutting off too early during a cycle.

This housing slot heater melts ice and prevents frost buildup inside the appliance housing, helping restore normal airflow and component operation. It's a direct replacement heater element used where ice forms around the housing slot. What it does:

• Provides targeted heat to the housing slot to reduce ice accumulation
• Helps restore proper airflow and circulation by clearing frost/ice blockages
• Commonly replaced when the housing develops repeated ice buildup or intermittent heating
• Works as part of the defrost/anti-ice system to protect internal components

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access typically requires removing exterior panels or trim; keep fasteners organized
• Handle the heater element and wiring with care to avoid damage to the element or connector

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Outer housing that covers the dryer control area. Replaces cracked, discolored, or broken console shells. Protects internal controls and restores look.

Replacement name plate that restores your appliance's identification label. Needed when the original plate is faded, damaged, or missing.

This inner oven door glass provides a clear, heat-resistant viewing panel so you can monitor cooking without opening the door. Restores the oven door's visibility and helps maintain proper oven sealing when installed correctly. What it does:

• Replaces the inner glass panel that fits inside the oven door assembly.
• Allows safe viewing of food while helping the door retain heat.
• Commonly replaced when glass is cracked, chipped, or fogged.
• Helps prevent heat loss and supports proper oven operation when intact.

• One inner oven door glass panel (single piece as shown)

• Handle carefully—tempered glass can shatter if dropped or struck.
• Follow the oven manufacturer's service manual for disassembly/reassembly steps.
• Disconnect power to the appliance before beginning any repair.
• If clips, gaskets, or mounting hardware are damaged, replace them as needed.

Replacement screw secures panels, brackets, and trim on washers and dryers. Replace missing, stripped, or damaged fasteners to restore proper fit.

Adjustable periscope vent for dryers with limited clearance. Installs between dryer exhaust and wall port. Replace if cracked, damaged, or missing.

Fix a dryer that won't heat or overheats with this temperature-sensing thermostat. Controls heating cycles for proper drying. DIY-friendly repair.

Fix a dryer that won't start or hums but doesn't spin. This motor run/start capacitor restores reliable motor operation. DIY-friendly repair in under an hour.

This console replaces the exterior control area that houses the appliance's buttons and display, restoring a clean, functional interface for selecting cycles and settings. Designed to match the original fit and appearance. What it does:

• Serves as the main user interface for cycle selection, timers and display readouts
• Replaces cracked, faded, or damaged panels that affect button operation or appearance
• Restores secure mounting for switches, buttons and display components
• Helps resolve unresponsive buttons, missing trim, or visible cosmetic damage

• Disconnect power (and gas/water if applicable) before beginning work
• Handle decorative trim and display lenses carefully to avoid scratches
• Typical installation requires removing the old console's retaining screws and reconnecting any wire harnesses; keep fasteners for reassembly

Secures panels, brackets, and trim in dryers, washers, and ice makers. Replace worn, stripped, or missing screws to restore proper fit and alignment.

This blower wheel attaches to the motor shaft inside the dryer and draws heated air through the drum and out the exhaust vent. It is typically made of plastic or composite material with angled fins designed to create strong airflow. Replace this part if the dryer takes too long to dry clothes, makes squealing or rattling noises, or produces weak airflow at the exhaust vent.

Molded elbow connector that redirects dryer exhaust to your home vent duct. Replace if cracked, loose, or leaking to restore a secure connection.

This metal hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and hose detachment. It's a compact replacement part for appliances that use band or spring-style clamps on hose connections. What it does:

• Holds a hose firmly on a barb or nipple to maintain a watertight connection
• Prevents leaks or dripping at hose junctions caused by loose fittings
• Reduces hose movement and vibration that can lead to wear or disconnection
• Works wherever a small appliance hose clamp is required

• Turn off and unplug the appliance and shut off water supply before starting
• Release hose pressure and drain residual water before removing the old clamp
• Use appropriate pliers or a screwdriver for the clamp type; avoid over-tightening

Adjustable periscope vent for tight dryer installations. Extends 18-29 inches to connect 4-inch dryer vent to wall exhaust in close quarters.