Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mex732cas3 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Agitator Hub
Genuine Frigidaire part
By: Frigidaire
Part Number: 134418700

The Agitator Hub is an OEM part for Frigidaire washing machines. It connects the agitator to the drive shaft, enabling the agitator to rotate and move clothes effectively during the wash cycle.  

Causes of a bad agitator hub can include wear and tear from frequent use, exposure to harsh detergents or hard water, or damage from overloading the washer.  

Symptoms of a bad agitator hub include:

  • Agitator not moving or rotating properly
  • Loud noises or grinding sounds during the wash cycle
  • Clothes not being cleaned effectively
  • The washer shaking or vibrating excessively

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You The agitator was not working   John H. • Auburn , NY • October 11, 2016

The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could.... Read more

More
Trunnion (Washer Inner Tub Hub)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131545101

The trunnion is the hub that mounts the washer's inner tub to the drive shaft. Replacing a worn hub restores a solid, centered connection so the basket spins smoothly without wobble, slip, or grinding. What it does:

  • Secures and centers the spin basket on the drive shaft for balanced rotation
  • Transfers drive torque to the inner tub during spin
  • Helps maintain basket alignment to reduce vibration
  • Typical symptoms of failure: loose/wobbly tub, scraping or grinding noises, poor or no spin, frequent out-of-balance events
What's included:
  • 1 trunnion
Install notes:
  • Disconnect power and water before service; wear gloves and eye protection
  • Access the hub by removing top/access parts, then the agitator/wash plate and inner-tub fasteners
  • Clean the shaft and mating surfaces; seat the new trunnion fully and tighten fasteners evenly in a crisscross pattern
  • Inspect related parts (tub seal, bolts, bearing) while open and replace if worn; run a short test cycle to ensure smooth spin

Do-It-Yourself Stories from Customers like You Leaking washer tub   Hugh S. • Miami , FL • June 25, 2016

The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more

More
Agitator
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204401

This agitator is a genuine Frigidaire part, sold individually. This agitator can be used as a replacement part for a washing machine or a washer/dryer combination appliance. This part rotates within the tub of the washing machine so that clothes and other items are tumbled around and fully cleaned.If an agitator has been subject to damage at some point in the standard lifespan of a washing machine, symptoms of damage will manifest in the form of a washing machine that will not agitate in a normal laundry cycle. If this is occurring, the agitator should be inspected for visible signs of damage, including punctures, scrapes, tears, and erosion to the material that could preclude it from serving its function. If the agitator seems damaged upon assessment, it should be removed and replaced with this genuine OEM replacement part before using the washing machine again.This is an OEM part sourced directly from the manufacturer. It is sold individually. This agitator is compatible with the following appliance brands: Frigidaire, Kenmore, Gibson, and Kelvinator.

Do-It-Yourself Stories from Customers like You Washer agitator and hub broken   Michael A. • Fayetteville , AR • July 18, 2015

I own several apartments with same washer/dryer combo. A couple months ago, one of my washers stopped agitating. I hired an Appliance Repair Company. They charged my $95 for agitator, $65 for hub and $120 for service call, plus tax for a total of $310. Oh, and it took them FOUR WEEKS to get the part in and fix my washer!. Something to do with "Frigidaire shipping issues". Last week I had another unit break with same problem. Ordered parts from AppliancePartsPros.com for $80, parts arrived... Read more

More
Transmission Assy
Genuine Frigidaire part
By: Frigidaire
Part Number: 134735700

 

Do-It-Yourself Stories from Customers like You Frigidaire laundry center not agitating goes through whole wash process including spin cycle no agitation   Keith Y. • Murrieta , CA • February 19, 2016

Replaced transmission. If you have a laundry center like me, you don't have alot of space. Replacing the parts want difficult. Just limited space made it harder. Also couldn't find a removal video for one of these but using a video for a frigidaire stand alone washer ouput me in the ball park and figured it out from there. Appliance parts pros had the best process too! Read more

More
Cap
Genuine Frigidaire part

Cap

By: Frigidaire
Part Number: 3204395

 

Do-It-Yourself Stories from Customers like You The agitator was not working   John H. • Auburn , NY • October 11, 2016

The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could.... Read more

More
Idler Pulley
Genuine Frigidaire part
By: Frigidaire
Part Number: 131862900

The Idler Pulley is an OEM part for Frigidaire dryers. It helps guide and maintain tension on the dryer drum belt, ensuring the drum rotates smoothly during the drying cycle.

Over time, the idler pulley can wear out due to friction and regular use, or it may become damaged from excessive strain or misalignment. If the idler pulley fails, the dryer drum may not rotate properly, leading to inefficient drying or a complete inability to dry clothes.

Symptoms of a bad Idler Pulley include:

  • Squeaking or squealing noises during operation
  • The drum not rotating or rotating unevenly
  • The belt appearing loose or slipping off the drum

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Burning smell
See more...
Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
Water Level Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 137015000

 

More
Lid Lock Switch Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 134101800

This washer switch is both the lid lock and lid switch. New mounting bracket replaces older design. Which means in some applications you may need to drill off old design mounting bracket prior to mounting the new lock. If your replacing the 4 wire switch you will need to tape off light switch leads. The light will no longer be used. Instructions included.

Do-It-Yourself Stories from Customers like You My 20 year old frigidaire stackable washer needed the lid switch replaced so it would trigger the spin cycle   Maryann S. • Owosso , MI • March 13, 2014

I unplugged the power source to the appliance. I unscrewed 2 screws and unplugged the lid switch. I replaced the old switch with the new switch and screwed in the same 2 screws that held the old switch in place and plugged the new lid switch back in under the lid. that's it . I plugged in the washer and started a load of clothes. works just fine. NO HUGE REPAIR BILL. Gosh it makes me happy to do such a simple repair to my old machine and for a very reasonable part price, my washer is... Read more

More
Washer Wiring Harness Clip
Genuine Frigidaire part
By: Frigidaire
Part Number: 131063700

Secures wiring harness to prevent chafing and maintain safe wire routing in washers, dryers, and laundry appliances. Replace if loose or broken. Check your model for compatibility.

More
Front Panel
Genuine Frigidaire part
By: Frigidaire
Part Number: 131104303

White

More
Stud - Agitator Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 131206800

 

Do-It-Yourself Stories from Customers like You The agitator was not working   John H. • Auburn , NY • October 11, 2016

The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could.... Read more

More
Dryer Control Timer
Genuine Frigidaire part
By: Frigidaire
Part Number: 131225300

Dryer won't advance through cycles or stops mid-cycle? This electromechanical timer controls cycle sequencing and duration. Moderate DIY repair.

More
End Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 131288101

White. Left hand side

More
End Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 131288211

White. Right hand side

Do-It-Yourself Stories from Customers like You Washer wouldn't run but as dryer did it obviously wasn't a circuit breaker   E James W. • Wilmington , NC • September 29, 2014

First attempt was to replace the door latch mechanism...didn't fix it. Kept researching and the washer control knob had been hard to turn so it seemed logical that was the problem. Also, at some point the end cap had broken. As it has the main grounding point inside it and as I was taking the control panel apart anyway it made sense to replace it. Read more

More
Washer Front /Top Panel Locator Pin
Genuine Frigidaire part
By: Frigidaire
Part Number: 131346400

This small pin helps align and position the washer's front or top panel during assembly and operation. It ensures proper alignment between panels and maintains structural integrity. Replace this part if panels are misaligned, the washer vibrates excessively, or there are gaps between panels.

More
Tub/Trunnion Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 131370400

 

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google