Mgr6508111 Parts

Very easy fix. Remove oven door by just opening it slightly and pulling up. (an easy way to clean it too). Then, with a phillips screw driver, remove two screws holding the damaged element in place. Slowly pull the element toward the front a couple inched to expose the wires. Disconnect the wires (no tools needed), remove the old element and replace it with the new. Reverse the past few steps and re-attach the wires and screw. Simple as that. I also chose to replace the Broiler Element as a... Read more

Used thick pad on kitchen table to hold oven door. Open door to first position (broil) and used soft leather gloves to lift up and remove. Door is heaver than it looks. Used screw driver to remove all screws from bottom and side trims. Removed side trims then bottom trim. It was not part of the repair, but I removed front glass to clean. There was some rust stuck on the glass from the old trim. Need to watch position of little spacers that are under the glass. With front glass in place,... Read more

Replaced it with the new parts. Read more

I ordered a new Glass door and door trip kit. A couple of items from the original door were lost that didn't come with the new parts, so there was some Jerry-rigging. Read more

First I remove screw on the mounting housing than I remove the panel of the back of the oven so I could trace the property wire the from the light housing than after locating the hook up location I put a colthing hanger through lamp assy opening in stove fish the wiring harness hook up and than mounted the lamp assy. all ok But I would reccoment that person would replace both lamp assy so a to have a strong light present Read more

I bought the black grates that won't show every little drop of grease even if I do wipe them down regularly. Read more

Ordered the parts from appliance parts pros and installed parts I did have to drill out the existing screws holding the existing orfice holders as the existing screws were rusted out Read more