Mhw5100dwo Parts

Push-in nut that secures panels, trim, or small components to studs or shafts. Restores a firm, vibration-resistant fastener to help stop loose panels and rattling caused by a worn or missing nut. What it does:

• Secures panels, trim or small assemblies to mounting studs or shafts.
• Helps keep parts aligned and reduces vibration or rattling during operation.
• Common symptom: loose or shifting panels, audible rattling, or components that won't stay in place.
• Designed for a push-fit installation to replace worn or missing fasteners.

• Always disconnect power to the appliance before servicing.
• Push the nut fully onto a clean, undamaged stud until seated; replace damaged studs or mounting hardware.
• If needed, use pliers or a socket to press the nut on evenly—avoid deforming surrounding plastic or sheet metal.

This retainer is a small mounting clip that secures internal components in place to prevent shifting and noise during operation. It restores proper alignment so panels or assemblies stay fastened and stable. What it does

• Holds a panel, trim, or internal component securely in its mounting location
• Prevents rattling, vibration noise, and loose or sagging parts
• Keeps connected parts aligned for reliable operation
• Commonly replaced when clip is cracked, broken, or missing

• One retainer clip

• Disconnect power before starting any repair
• Remove necessary panels or access covers to reach the damaged clip
• Replace the clip in the same orientation; avoid forcing parts to prevent damage
• If additional fasteners are damaged or missing, replace them as needed for a secure installation

This top panel is the exterior upper cover that protects internal washer parts and gives the appliance a finished look. It restores a secure mounting surface for the control area and helps keep water and debris out of the cabinet. What it does

• Covers and protects internal components at the top of the washer cabinet.
• Provides the mounting surface and alignment for the control console and lid.
• Restores appearance when the original panel is dented, cracked, or rusted.
• Reduces rattles or vibration caused by a loose or warped top.

• Disconnect power and water supply before starting any repair.
• Use basic hand tools; some screws or clips may need to be removed to lift the old panel.
• Handle edges carefully — metal panels can be sharp.
• Have a second person assist if needed to prevent bending or dropping the panel.

This tub clamp secures a flexible seal or hose to the appliance's tub, maintaining a tight, leak-resistant connection. Replace a weakened or damaged clamp to stop leaks and keep the tub joint stable during operation.

• Applies even clamping pressure around the tub connection
• Helps prevent water leaks at the tub-to-seal or tub-to-hose joint
• Restores proper fit when the original clamp is stretched, stripped, corroded, or missing
• Common symptoms: water at the base/front, loose seal or hose, visible clamp damage

• Disconnect power and turn off water before service
• Access the tub connection; remove the old clamp and inspect the seal/hose for wear
• Clean mating surfaces; seat the seal evenly, position the clamp, and tighten until snug without pinching the rubber
• Run a quick fill/drain test and check for leaks

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This transport cover secures internal components during shipping and service to prevent movement and damage. It helps keep parts aligned and reduces noise caused by loose components while the appliance is being moved. What it does:

• Holds internal components in place during transport to prevent shifting or impact damage
• Reduces rattles and vibration caused by unsecured parts
• Protects delicate assemblies from knocks during delivery or handling
• Helps maintain alignment of components until the appliance is installed

• One transport cover

• Disconnect power and water before servicing the appliance
• Remove all shipping brackets and covers per the owner's manual before normal operation
• Use manufacturer-specified fasteners and torque; do not force or modify the part

This outer door assembly replaces a damaged or worn outer door to restore your appliance's appearance and allow the door to close securely. It's a direct-fit exterior door panel used where the outer skin is cracked, dented, or cosmetically damaged. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer door panel
• Restores proper door alignment and helps the door close evenly
• Protects internal door components and maintains the appliance's exterior finish
• Helps eliminate rattling or loose-feeling doors caused by outer door damage

• Disconnect power and follow all safety instructions before beginning repair.
• Installation may require basic hand tools and two people for safe handling of the door.
• Some installations require transferring hinges, trim, latch, or inner door components from the old door; have those parts handy.

This small replacement clip secures panels, trim, or wiring so appliance components stay properly positioned and the unit operates quietly. A simple, low-cost part that prevents loose pieces from shifting or rattling during use. What it does

• Holds trim, panels or harnesses in place to prevent movement and noise
• Keeps wiring or small components secured to reduce wear from vibration
• Helps maintain proper alignment of plastic or metal assemblies
• Commonly used where a simple snap-in retainer is required

• One clip/retainer

• Disconnect power (and water if applicable) before servicing the appliance
• Inspect surrounding parts for damage; replace any cracked or broken mounting features
• Typically installs with pliers or by hand; avoid forcing to prevent breakage

This wire harness routes power and signal connections between an appliance's controls and components, restoring proper electrical continuity for normal operation. It replaces a damaged or worn harness to help resolve power and control issues. What it does:

• Provides the factory wiring connections between control boards, motors, and sensors
• Restores reliable power and signal paths when wiring is frayed, melted, or broken
• Can stop intermittent operation, failure to start, or control communication errors when caused by wiring faults
• Keeps wires organized and secured to prevent chafing and short circuits

• One complete wire harness as shown

• Disconnect all power (unplug or shut off breaker) before beginning work
• Transfer and align connectors exactly as removed; do not force mismatched plugs
• Route and secure the harness with existing clips or fasteners to avoid contact with hot or moving parts

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

This small replacement clip secures a press (push) switch to the appliance control panel so the switch stays aligned and operates reliably. It restores proper button engagement and prevents the switch from working loose. What it does:

• Holds the press/push switch firmly in the control panel or console
• Keeps the switch aligned so button presses register correctly
• Helps stop intermittent or loose-feeling buttons caused by a failing retainer
• Prevents the switch from shifting or falling out during use

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires removing the control panel or console—retain screws and note their locations
• Clip installs by snapping into the panel and seating the switch; small pliers may help with alignment

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation