Mhw6000gx2 Parts

Secures water and drain hoses to fittings, preventing leaks at connections. Replace if hoses slip or show water seepage. Confirm fit with your model.

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

Fixes loose or unresponsive control buttons by securing the press switch to the panel. Quick 5-minute repair restores reliable button operation.

The Door Inner is an OEM part for Whirlpool washing machines. As an integral component situated behind the outer door panel, this plastic inner shell provides structure and seals the inner workings.

Symptoms of a bad door inner include:

• Excessive vibrations or rattling noises coming from the door area  
• Gaps forming between the inner and outer doors
• Deteriorating or cracked plastic door liners
• Difficulty latching or sealing the door closed

Causes relate to wear over time under repeated pressures of the wash cycle. Mineral deposits also accelerate damage to high-efficiency models. 

This Whirlpool replacement door inner restores a positive seal, quiet operation, and protection from leaks. Compatible with legacy models, it ensures dependable performance for all your laundry needs.

Suspension spring that supports and stabilizes the washer tub. Replace if spring is stretched, broken, or detached to restore proper tub balance.

This is a small rubber o-ring that seals the drain pump filter cap on a front-load washer. It creates a watertight seal between the filter cap and the pump housing, preventing leaks during the wash and drain cycles. Replace this o-ring if you notice water dripping or pooling near the drain pump filter area at the front bottom of the washer.

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.

This is the lower cover panel for the detergent dispenser drawer on a front-load washing machine. It snaps onto the bottom of the dispenser drawer to enclose the compartment and direct water flow properly during the wash cycle. Replace this cover if it is cracked, missing, or warped, which can cause detergent to dispense incorrectly or water to leak from the dispenser area.

Washer leaking or draining poorly? This cross flow hose routes water between components to stop leaks and restore proper drainage. Direct fit replacement.

Secures the vent hose connection on your washer to prevent air leaks and ensure proper ventilation. Replace if loose, cracked, or missing. Verify fit with your model number before ordering.

Replacement clip for washer and laundry center models. Secures internal components in place. Order a new clip if yours is cracked, broken, or missing.

The Harns-Wire is an OEM part for Whirlpool front-loading washing machines. 

Causes of a bad Harns-Wire can include wear from prolonged vibration during spin cycles. The wiring may crack or split over many years of use due to constant movement inside the chassis. 

Symptoms of a bad Harns-Wire include:

• Unexpected intermittent outages or failed cycles  
• Unbalanced loads resulting in excessive shaking
• An inability to properly fill or drain water
• Error codes indicating electronic control issues

This genuine Whirlpool replacement is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well.