Mhw6000gx2 Parts

This nozzle directs and focuses water flow inside the dishwasher so dishes get a thorough rinse. Replaces a worn, cracked, or clogged nozzle to restore spray coverage and help prevent poor cleaning performance. What it does

• Channels water from the spray arm or manifold to create a targeted spray pattern
• Helps maintain even water distribution across racks for better cleaning
• Clogs, cracks, or damage can cause weak spray or spotty wash results
• Compatible with systems that use a snap- or press-fit nozzle on the spray assembly

• Disconnect power and water supply before starting any repair
• Remove the spray arm or access panel as needed to reach the nozzle
• Inspect mating surfaces for debris; press or snap the new nozzle into place until seated

A small metal hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable replacement for worn or loose clamps on appliance water and drain lines. What it does:

• Holds a hose or tube firmly on a barb or fitting to prevent leaks or disconnection
• Resists loosening from vibration and normal use
• Restores a secure connection when an old clamp is corroded, stretched, or broken
• Helps prevent water damage from loose plumbing connections

• One metal hose clamp

• Disconnect power and shut off water supply before servicing
• Slide clamp over hose, position over fitting barb, then compress or tighten as required
• Replace any damaged hoses or fittings when installing a new clamp
• Verify a leak-free connection before returning appliance to service

This outer door assembly replaces a damaged or worn outer door to restore your appliance's appearance and allow the door to close securely. It's a direct-fit exterior door panel used where the outer skin is cracked, dented, or cosmetically damaged. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer door panel
• Restores proper door alignment and helps the door close evenly
• Protects internal door components and maintains the appliance's exterior finish
• Helps eliminate rattling or loose-feeling doors caused by outer door damage

• Disconnect power and follow all safety instructions before beginning repair.
• Installation may require basic hand tools and two people for safe handling of the door.
• Some installations require transferring hinges, trim, latch, or inner door components from the old door; have those parts handy.

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse

A replacement cross-flow hose that routes water inside the appliance to maintain proper circulation and help prevent leaks. Designed to match the original fit and restore correct water flow where the factory hose is damaged or worn. What it does:

• Carries and directs water between internal components to enable proper circulation
• Replaces cracked, split, or soft hoses that can cause leaks or poor performance
• Helps stop visible water pooling or dripping from the hose area
• Restores factory routing to prevent kinks or flow restrictions

• Disconnect power and turn off water supply before starting any repair
• Inspect hose fittings and clamps; replace clamps if corroded or damaged
• Ensure proper routing and avoid sharp bends or contact with moving parts
• Hand-tighten fittings, then snug clamps; check for leaks before completing repair

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and keep connections tight. Durable metal construction provides reliable grip where hose-to-barb connections need fastening. What it does

• Secures a flexible hose to a barb or fitting to maintain a watertight connection
• Stops hose slippage that can cause leaks or intermittent water loss
• Helps stabilize hose routing to reduce chafing and wear
• Works on common appliance drain and supply hoses where a clamp is required

• One metal hose clamp

• Disconnect power and shut off water before servicing the appliance
• Position clamp over the hose barb and compress/turn as required using pliers or a screwdriver type matching the clamp style
• Tighten until snug—avoid over-tightening to prevent hose damage
• Inspect for leaks after restoring power and water

This wire harness routes power and signals between the appliance control and internal components, restoring reliable electrical connections for normal operation. It replaces a damaged or frayed harness to help resolve intermittent power or control issues. What it does:

• Provides the bundled wires and connector plugs that link the main control to motors, switches, sensors, and heating elements
• Restores broken or corroded connections that can cause intermittent operation or failure to start
• Helps address symptoms such as controls not responding, burners/heater not powering, or intermittent motor/pump operation
• Matches OEM connector groupings to ensure correct plug fit and routing when replacing the original harness

• 1 wire harness as shown

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the harness
• Compare the replacement harness to the original to ensure connector types and wire routing before installing
• Secure harness routing away from heat sources and sharp edges; use existing clips or ties
• If you see burnt connectors or melted insulation, inspect surrounding components for underlying faults before restoring power

This control panel is the user interface for the oven/range, letting you select cook modes, set timers, and view status information. Replacing a faulty panel restores responsive touch/buttons and readable display feedback. What it does:

• Provides push-button/soft-touch controls for oven functions and settings
• Displays time, temperature, cycle status and error codes
• Restores unresponsive or intermittent control/keypad behavior
• Helps resolve blank or garbled display symptoms tied to the front control assembly

• Disconnect power at the breaker before starting any repair
• Typical install requires removing the console trim and disconnecting wiring harnesses
• Handle the panel carefully to avoid damaging the display or buttons

This small replacement clip secures a press (push) switch to the appliance control panel so the switch stays aligned and operates reliably. It restores proper button engagement and prevents the switch from working loose. What it does:

• Holds the press/push switch firmly in the control panel or console
• Keeps the switch aligned so button presses register correctly
• Helps stop intermittent or loose-feeling buttons caused by a failing retainer
• Prevents the switch from shifting or falling out during use

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires removing the control panel or console—retain screws and note their locations
• Clip installs by snapping into the panel and seating the switch; small pliers may help with alignment

This spring-style hose clamp secures flexible water hoses to fittings to help prevent leaks and keep connections tight. It's a simple replacement that restores a proper seal at the hose connection. What it does:

• Compresses around a hose to hold it firmly on a tailpiece or barb
• Helps stop leaks or drips caused by loose or worn clamps
• Restores proper clamping force when original clamp is corroded or stretched
• Common symptom: visible water at the hose connection or water pooling under the appliance

• One spring-style hose clamp

• Disconnect power and shut off the water supply before servicing
• Slide clamp onto hose, push hose fully onto the fitting, then position clamp over the barb
• Use pliers to expand the clamp, seat it, and release to lock; avoid over-compressing the hose
• Replace any damaged hoses or fittings and test for leaks after restoring water and power