Mhw600xg1 Parts

This electronic control board assembly manages an appliance's user interface and timed operations so your appliance responds correctly to selections and runs complete cycles. Replacing a failed control board restores reliable control and normal cycle operation. What it does:

• Acts as the appliance's central controller, processing user inputs and coordinating motors, valves, heaters, and sensors
• Sends and receives signals to start, stop, and sequence cycles for proper operation
• Commonly linked to symptoms such as unresponsive or blank controls, incorrect or interrupted cycles, or persistent error codes
• Resolves intermittent operation, failure to start, or incorrect cycle behavior when identified as the faulty component

• Always disconnect power (unplug or shut off breaker) before inspecting or replacing the control board
• Handle the board carefully; avoid static discharge and damage to connectors or traces
• Document connector locations or take photos before unplugging wiring to ensure correct reassembly
• If symptoms persist after replacement, verify related components and wiring.

This small replacement clip secures panels, trim, or wiring so appliance components stay properly positioned and the unit operates quietly. A simple, low-cost part that prevents loose pieces from shifting or rattling during use. What it does

• Holds trim, panels or harnesses in place to prevent movement and noise
• Keeps wiring or small components secured to reduce wear from vibration
• Helps maintain proper alignment of plastic or metal assemblies
• Commonly used where a simple snap-in retainer is required

• One clip/retainer

• Disconnect power (and water if applicable) before servicing the appliance
• Inspect surrounding parts for damage; replace any cracked or broken mounting features
• Typically installs with pliers or by hand; avoid forcing to prevent breakage

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

This small replacement clip secures a press (push) switch to the appliance control panel so the switch stays aligned and operates reliably. It restores proper button engagement and prevents the switch from working loose. What it does:

• Holds the press/push switch firmly in the control panel or console
• Keeps the switch aligned so button presses register correctly
• Helps stop intermittent or loose-feeling buttons caused by a failing retainer
• Prevents the switch from shifting or falling out during use

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires removing the control panel or console—retain screws and note their locations
• Clip installs by snapping into the panel and seating the switch; small pliers may help with alignment

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

The Tub Suspension Spring is an OEM part for Whirlpool washers. It is responsible for supporting and stabilizing the washer tub during the wash cycle. This spring ensures proper balance and reduces excessive vibrations and movement of the tub. 

A bad tub suspension spring can occur due to continuous use, heavy loads, or accidental mishandling. If you notice symptoms such as excessive shaking or vibrating during the wash cycle, loud banging noises, the washer moving or "walking" during operation, or leaks due to increased stress on the tub and other components, it may be time to replace the tub suspension spring set.

Symptoms of a bad tub suspension spring include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or "walking" during operation
• Leaks due to increased stress on the tub and other components

Restore your washer by replacing the faulty or worn-out tub suspension spring with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

Distribution lever replacement that operates the dispenser/linkage inside the appliance, restoring proper mechanical movement and reliable dispenser operation. Use when the original lever is cracked, worn, or no longer moves freely. What it does:

• Replaces the plastic lever that routes motion within the dispenser/distribution assembly.
• Helps the dispenser or internal linkage open and move correctly during cycles.
• Common symptoms: dispenser won't open, linkage binds or hangs, or inconsistent dispensing.
• Works with the existing mounting points and clips in the dispenser assembly.

• Disconnect power (unplug or shut off breaker) and water supply before starting any work.
• Remove the dispenser or access panel to reach the lever; take care with plastic clips and tabs—do not force them.
• Inspect and replace any worn clips, springs, or adjoining parts to ensure proper function.
• Test dispenser operation through a short cycle before reassembling panels.

This heater is the electric heating element that warms air or water so your appliance reaches the proper operating temperature. Replacing a failed heater restores normal heating performance and helps cycles finish correctly. What it does:

• Generates heat needed for normal drying or wash cycles
• Allows the appliance to reach and maintain operating temperature
• Common symptom: appliance runs but does not heat or takes much longer to finish
• Common symptom: cycles complete without expected temperature or sanitizing action

• One replacement heater element

• Turn power to the appliance off at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Follow the appliance service manual for panel removal and wiring re-connection

This replacement refrigerator water filter cartridge helps restore clear-tasting drinking water and ice by filtering particulate matter and common taste/odor causes. Designed to fit compatible Whirlpool refrigeration systems for reliable in-line filtration. What it does:

• Filters sediment and particulates to improve water clarity
• Reduces common taste and odor issues associated with aging filters
• Helps maintain ice quality by filtering water used for ice production
• Addresses symptoms like reduced water taste, cloudy ice, or off-odors

• Shut off water supply and relieve line pressure before removing the old filter
• Remove old cartridge per manufacturer instructions and insert the new filter until it seats securely
• Flush water lines and dispense water until it runs clear before use
• If you notice leaks or poor fit, re-seat the cartridge and check the filter housing for damage

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection