Mhw600xg1 Parts

This wire harness routes power and signals between the appliance control and components to restore reliable electrical connections and normal operation. It replaces damaged or worn wiring to help stop intermittent power, unresponsive controls, or component failures. What it does:

• Connects control board to motors, switches, sensors and other electrical components
• Restores broken or frayed circuit paths that cause intermittent operation or no power
• Replaces burned, corroded, or loose connector ends that cause poor contact
• Helps prevent shorting or blown fuses when original wiring is compromised

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Handle connectors by the housing; avoid pulling on individual wires.
• Route and secure the harness the same way as the original to prevent pinching or heat exposure.

The Harns-Wire is an OEM part for Whirlpool front-loading washing machines. 

Causes of a bad Harns-Wire can include wear from prolonged vibration during spin cycles. The wiring may crack or split over many years of use due to constant movement inside the chassis. 

Symptoms of a bad Harns-Wire include:

• Unexpected intermittent outages or failed cycles  
• Unbalanced loads resulting in excessive shaking
• An inability to properly fill or drain water
• Error codes indicating electronic control issues

This genuine Whirlpool replacement is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well. 

This shield is a protective cover that helps keep internal appliance components safe from heat, debris, and wear. Replacing a damaged shield restores protection to nearby parts and helps prevent further damage. What it does:

• Covers and protects internal components from debris, heat, and contact
• Helps prevent rubbing or chafing on wiring and nearby parts
• Reduces risk of heat-related damage when the original shield is warped or missing
• May stop rattling or vibration caused by a loose or broken shield

• Shield

• Disconnect power (and gas if applicable) before servicing
• Inspect the mounting area for damage or missing fasteners before installing
• Use the correct fasteners and alignment; do not force the shield into place

This water pump assembly moves water through your appliance so cycles run as designed. Replacing a weak or failed pump restores proper water flow, helping prevent standing water, noise, and performance issues. What it does

• Drives water movement for circulation and/or draining during operation
• Maintains consistent water flow to support effective cycle performance
• A worn or clogged pump can leave standing water or reduce wash/clean performance
• Failures may present as humming/grinding noises or leaks at the pump area

• 1 water pump assembly

• Disconnect power and water supply before servicing; expect some residual water
• Note hose and wire locations before removal; transfer connections one at a time
• Ensure gaskets/O-rings seat properly and clamps/fasteners are secure
• Run a test cycle and check for proper operation and leaks after installation

This is the pull-out dispenser drawer assembly for a washer. It holds and channels laundry products into the dispenser housing so each additive is released at the right time, restoring smooth operation and proper dispensing. What it does:

• Holds detergent and additives and directs them into the wash at the correct stage
• Restores smooth open/close action of a worn or broken drawer
• Helps resolve issues like detergent remaining in the drawer after a cycle
• Addresses leaks or drips from a cracked or warped dispenser drawer

• 1 dispenser drawer assembly

• Unplug the washer and turn off water supply before servicing
• Pull the old drawer out; depress the locking tab(s) to remove
• Transfer any reusable inserts/caps from the original drawer if applicable
• Slide the new drawer into the rails until it clicks; run a quick cycle to check for proper dispensing and leaks

This nozzle directs and focuses water flow inside the dishwasher so dishes get a thorough rinse. Replaces a worn, cracked, or clogged nozzle to restore spray coverage and help prevent poor cleaning performance. What it does

• Channels water from the spray arm or manifold to create a targeted spray pattern
• Helps maintain even water distribution across racks for better cleaning
• Clogs, cracks, or damage can cause weak spray or spotty wash results
• Compatible with systems that use a snap- or press-fit nozzle on the spray assembly

• Disconnect power and water supply before starting any repair
• Remove the spray arm or access panel as needed to reach the nozzle
• Inspect mating surfaces for debris; press or snap the new nozzle into place until seated