Mhw6630hco Parts

This genuine-style drain hose routes wastewater from the tub to the drain pump to keep your appliance draining properly and reduce the risk of leaks or overflow. Designed to match OEM fit and routing. What it does:

• Carries wastewater from the tub to the drain pump or house drain.
• Prevents leaks by maintaining a sealed, flexible water path.
• Worn, cracked, or clogged hoses can cause poor draining, water on the floor, or error codes related to drainage.
• Replacing a damaged hose restores reliable drain performance.

• Disconnect power and turn off the water supply before starting work.
• Use original-style clamps or new hose clamps to ensure a secure seal; inspect fittings for damage.
• Avoid sharp bends or kinks when routing; confirm proper routing to prevent siphoning or backflow.

Kit contains two 10 feet inlet hoses.

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

The Nozzle is an OEM part for Whirlpool washing machines. It spray clean water and detergent throughout the drum to thoroughly saturate clothes during cycles.

Common causes of replacement involve mineral deposits clogging spray ports over time or cracks reducing water pressure. Impacts from overloading or an imbalanced spin cycle may also damage plastic.

Symptoms include:

• Weak or incomplete water coverage of clothesloads
• Soap scum residue failure to rinse away fully
• Damp spots signifying poor absorption into fabrics
• Strange noises or shaking from uneven fluid dispersal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The CORD POWER is an OEM part for Whirlpool washing machines. It serves as the connection between the washer and a power source, supplying electricity needed to run cycles and components. 

This power cord contains wiring designed to meet Whirlpool's rigorous safety and performance standards. It delivers steady voltage to power essential parts like the motor, timer module, and heating elements without interruption.

Symptoms of a bad power cord include:

• The washing machine not powering on when switched to a cycle 
• Cycles starting and stopping intermittently
• Surges in voltage resulting in errors or burned-out components
• An electrical burning smell coming from the cord 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This inner oven door glass provides the clear, heat-resistant window that lets you monitor cooking while helping contain oven heat. Replacing damaged or cracked glass restores visibility and helps maintain safe cooking performance. What it does:

• Forms the inner transparent barrier of the oven door so you can see inside while containing heat
• Helps maintain correct oven temperature by sealing the door assembly
• Replaces cracked, chipped, or shattered inner glass that causes visible damage or heat loss
• Reduces risk of further glass breakage during normal oven use

• One inner oven door glass

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Use gloves and eye protection; handle glass carefully to avoid cuts
• Installation commonly requires removing the oven door and separating the inner and outer panels—follow the OEM service instructions

This genuine mounting screw secures panels and components so assemblies stay aligned and rattle-free. Designed to replace worn or missing fasteners and restore proper fit and function. What it does:

• Secures panels, brackets or trim to prevent movement and vibration
• Restores proper alignment of assemblies that feel loose or shift
• Helps eliminate rattling, squeaks, or parts that fall away during use
• Matches OEM thread and head type for correct fit

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Replace any additional damaged or missing fasteners for best results
• Disconnect power or follow appliance-specific safety steps before working near wiring or energized components

Spring-style hose clamp that secures flexible appliance hoses to fittings, helping keep connections tight to reduce leaks and maintain proper water flow. Use it to replace a worn or damaged clamp and restore a reliable hose seal. What it does:

• Compresses around a flexible hose to lock it onto barbs or fittings
• Helps prevent drips, leaks, and water pooling at hose connections
• Keeps hoses from slipping off during appliance operation
• Useful when a clamp is corroded, stretched, or no longer holds tension

• Disconnect power and shut off water to the appliance before starting any repairs
• Use pliers to compress the clamp for removal and installation; keep hands and face clear when releasing tension
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn

The Handle is an OEM part for Whirlpool washing machines. As the interface point for users, this handle allows for easy opening and closing of the washer door. 

Symptoms of a bad handle can include: 

• Faded or peeling surface finishes on the handle plastic  
• Loose mounting screws or bolts that caused play
• Broken or cracked internal mounting posts
• Handles that do not stay securely in the open position 

Causes relate to long-term wear from repeated use and exposure to chemicals in the laundry room environment. Accidental damage during unloading may also occur.

This Whirlpool replacement handle restores easy machine access with a professional fit and finish. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models for a seamless look. Proper installation returns full functionality.

This wiring harness connects the control board to the M22 HMI interface, providing the signal and power paths needed for the user interface to operate. It restores reliable connections between the board and control panel. What it does:

• Provides the dedicated wiring and connector(s) between the control board and the M22 human-machine interface (HMI)
• Carries control signals and low-voltage power required for the display and keypad to function
• Common symptom fix: control panel is unresponsive, display blank, or intermittent button response
• Replaces damaged, burned, or loose harness connectors that can cause communication faults

• One control board to M22 HMI wiring harness

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Disconnect and reconnect connectors by the housing—do not pull on wires
• Inspect mating connectors and pins for corrosion or damage before installing the new harness

This control console panel replaces a damaged or worn front panel to restore the appliance's user interface and appearance. It secures the controls and provides a finished surface for buttons and display elements. What it does:

• Houses the control buttons and display area so the console functions properly
• Restores a clean, undamaged surface if the original panel is cracked, warped, or cosmetically worn
• Helps maintain proper alignment and mounting for control components
• Can resolve user-interface issues caused by loose or broken panel mounting

• One replacement control console panel

• Disconnect power to the appliance before beginning any repairs
• Installation typically requires removing trim pieces and fasteners; keep track of screws and clips
• Handle the panel carefully to avoid scratching or damaging the finish or attached components
• If the control assembly or electronic components are damaged, additional parts may be required

The Stator is an OEM replacement part for Whirlpool washing machines. It is an essential electrical part that powers the motor and spindle during wash cycles. 

Symptoms of a faulty stator include:

• No spinning or agitation within the wash tub 
• Burning smells coming from the motor area  
• Random failure to start cycles or drain properly
• Buzzing or grinding noises mid-cycle

Causes can involve moisture damage over time compromising electronics. Physical impacts may also crack solder joints or short connections. As a high-use part, the stator endures various motor-based stresses.

This genuine OEM Whirlpool component is also compatible with various washing machine models from Maytag, KitchenAid and Kenmore.

The Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. 

Causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

Symptoms of a bad valve include:

• Slow or incomplete fills during washing cycles  
• Water not dispensing correctly through hoses or dispensers
• External water leaks from the valve area
• Error codes related to water level or pressure issues

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.