Mhw8630hw Parts

Internal washer drum component that directs water flow during wash cycles. Replace if cracked, broken, loose, or catching on clothing during agitation.

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

Replacement mounting bracket for laundry center washers. Secures components to the frame. Order when original is cracked, broken, or missing.

Creates a watertight seal between washer door and drum to prevent leaks. Replace if torn, cracked, or leaking water. Verify fit with your model number.

The Drain Hose is an OEM part for Whirlpool washers. It is responsible for carrying the wastewater out of the washer during the draining process.

A bad drain hose can be caused by wear and tear, blockages, or damage. If you notice water leaks, slow or incomplete drainage, or unusual noises during the draining cycle, it may indicate a problem with the drain hose.

Symptoms of a bad drain hose include:

• Water leaks around the hose connection points
• Slow or incomplete draining of water from the washer
• Gurgling or unusual noises during the draining process
• Visible damage or signs of wear on the hose

Replace your faulty drain hose with this genuine OEM Whirlpool part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This replacement screw secures panels, brackets, and internal components in your appliance. Replacing a missing or stripped screw restores a tight, rattle-free fit and helps keep parts properly aligned and protected during operation.

• Fastens appliance panels, brackets, and hardware in the designated locations
• Replaces missing, stripped, or corroded fasteners
• Helps reduce vibration noise and looseness from unsecured parts
• Restores proper fit and alignment after service or reassembly

• Disconnect power; turn off water supply before servicing
• Match the screw to the original location and replace one at a time to maintain alignment
• Use the correct driver; tighten snugly without overtightening to avoid stripping metal or cracking plastics
• If threads in the mating hole are damaged, repair/replace the clip or insert as specified in the service manual

Replacement glass panel for your washer door. Install this part if your original glass is cracked, shattered, or broken. Restores door visibility.

This genuine-style drain hose routes wastewater from the tub to the drain pump to keep your appliance draining properly and reduce the risk of leaks or overflow. Designed to match OEM fit and routing. What it does:

• Carries wastewater from the tub to the drain pump or house drain.
• Prevents leaks by maintaining a sealed, flexible water path.
• Worn, cracked, or clogged hoses can cause poor draining, water on the floor, or error codes related to drainage.
• Replacing a damaged hose restores reliable drain performance.

• Disconnect power and turn off the water supply before starting work.
• Use original-style clamps or new hose clamps to ensure a secure seal; inspect fittings for damage.
• Avoid sharp bends or kinks when routing; confirm proper routing to prevent siphoning or backflow.

Replace your washer's internal hose to stop leaks and restore proper filling and draining. Swap when cracked or worn to fix performance issues.

Screw: 8-16 x 3/8 inch.

Connect hot and cold water faucets to your washer's inlet valves with this 2-pack of 5-foot fill hoses. Replace aging, cracked, or leaking supply lines.

Washer won't start or stops mid-cycle? A faulty wire harness disrupts power to controls, motors, and sensors. This assembly restores electrical connections.

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Replace your washer water hose when cracked, leaking, or collapsed. Restores proper water flow between components and prevents leaks. Confirm fit.

Carries water from home supply to washer inlet valve. Replace if your hose is cracked, worn, leaking, or damaged by pests or age. Restores proper fill.

The Control Board is an OEM part for Whirlpool laundry center units. As the central processing component, it coordinates all functionality across the washer and dryer simultaneously. The precise circuitry allows for customized paired cycles that wash and dry loads efficiently based on user settings.

Symptoms of a bad control board typically include the inability to operate either appliance individually or synchronize them together as intended. Components may run incorrectly or in an unbalanced state. Water levels, temperatures, speeds, and timed durations could all be disrupted. 

Symptoms of a bad control board include:

• Washer and dryer failing to start or end together  
• Display/selections malfunctioning   
• Paired cycles unable to be completed properly
• Fault codes appearing

This OEM replacement is also compatible with stackable units from Whirlpool brands like Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore models.