Mhwe400ww Parts

Stabilizes the drum during washer transport or moving. Includes four bolts that thread into rear bolt holes. Replace if original bolts are missing or lost.

This metal clamp secures the exhaust hose connection to the dryer's outlet port, preventing air leaks and ensuring proper ventilation. Replace if you notice reduced airflow, lint buildup around the connection, the hose feels loose, or drying times have increased.

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

• Fastens a hose to a barb or port to prevent leaks
• Helps keep hoses from slipping off due to vibration or pressure
• Restores proper sealing when a clamp is rusted, bent, or stripped
• Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water when removing hoses
• Position the clamp just behind the hose barb/bead and secure with the appropriate tool
• Restore water and power, then run a quick check for leaks at the connection

Hose clamp for securing water supply and drain hoses on the washer. Provides leak-free seal at hose connection points.

This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does

• Fastens brackets, panels, and internal sub-assemblies in the appliance
• Helps maintain alignment to reduce vibration and rattling
• Replaces missing, rusted, or stripped screws that no longer hold
• Useful when a part won't mount securely or a screw backs out during use

• One screw

• Disconnect power; for gas appliances, also shut off the gas supply
• Compare to the original for length and thread style for the location
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Do not overtighten; if the mounting hole or clip is worn, replace it

Fix F20 error codes and overfilling issues with this washer water level pressure switch. Senses proper fill levels to restore normal wash cycles.

Fix detergent not dispensing or musty odors with a new dispenser divider. This small part routes powder or liquid detergent properly. Easy DIY fix.

Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.

Noise filter (line filter) that suppresses electrical interference on the washer power line. Protects electronic controls from power surges and reduces EMI. Replace if washer has intermittent operation or won't start.

Front counterweight that mounts to the washer's outer tub. Replace if cracked, broken, or missing to restore proper balance and reduce vibration during spin.

This plastic lever connects the dispenser mechanism in a washing machine, actuating the release of detergent or fabric softener at the correct point in the wash cycle. It transfers mechanical motion to open the dispenser at the proper time. Replace this lever if your washer is not dispensing detergent or fabric softener, or if the lever appears cracked or broken.

Washer won't start or shows electrical faults? A failed ground switch disrupts the safety circuit. This switch restores proper grounding for reliable operation.

Washer won't spin or makes noise? This retaining nut secures pump and motor components. Common cause of leaks and wobbling. Basic tools needed.

This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:

• Fastens panels, brackets, or assemblies where specified in the model's parts diagram
• Replaces missing, rusted, or stripped hardware
• Helps eliminate looseness, rattling, or vibration
• Restores secure alignment of mounted components

• 1 screw

• Disconnect power and shut off water/gas before servicing.
• Verify the exact location in your model's parts diagram and replace screws one at a time to maintain alignment.
• Use the correct driver/bit; start threads by hand to avoid cross-threading and do not overtighten.
• Inspect mating holes/clips for damage; repair or replace related hardware if threads are compromised.

Fixes loud banging and excessive vibration during spin when suspension spring hangs loose. This bracket secures the spring to the cabinet for stable operation.

Fix a washer that stops mid-cycle or won't advance between wash stages. This actuator cam guides the lever arm movement for proper cycle transitions.