Msd2456geq - Maytag Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387558
Fix excessive buzzing or rattling noise from your refrigerator's fan area. This rubber grommet cushions the fan motor mount to reduce vibration and noise.
Do-It-Yourself Stories from Customers like You
Start relay failed after power outage Keith B. • Middletown , CT • March 09, 2026
Replaced relay.
Ordered a spare one.
Also noticed fan motor sounded a bit funny so I ordered a spare one of those too.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10309995
Refrigerator not cooling or freezing? This compressor powers your cooling system. Professional installation recommended due to sealed system work.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61002104
This is a replacement pin wheel that secures and guides a mating linkage or small shaft in the appliance, restoring proper alignment and smooth movement. A direct-fit replacement when the original wheel is cracked, worn, or missing. What it does
- Holds and stabilizes a small rotating shaft or linkage to maintain proper component alignment
- Allows smooth transfer of motion between mating parts to prevent skipping or binding
- Worn or broken pin wheel can cause noise, intermittent movement, or improper function of the associated mechanism
- Small, inexpensive part that prevents further wear to adjoining components when replaced promptly
What's included
Install notes
- Disconnect power to the appliance before starting any repair
- Access and removal often require removing a panel or nearby components; keep fasteners organized
- Inspect the mating shaft/clip and replace any damaged hardware for reliable operation
- Tighten and test moving parts by hand before restoring power; follow OEM service manual steps
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61005277
This fountain switch controls the refrigerator dispenser's user-activated circuit so the dispenser responds when the lever or pad is pressed. Replaces a worn or failed dispenser switch to restore normal dispenser control. What it does:
- Acts as the user-activated switch for the water/ice dispenser circuit
- Allows the dispenser to energize the valve or auger motor when pressed
- Commonly replaced when dispenser fails to respond or is intermittent
- Helps stop unexpected dispenser activation due to a stuck switch
What's included:
Install notes:
- Disconnect power to the appliance before beginning any repair
- Access may require removing the dispenser/control panel; handle plastic trim carefully
- Avoid pulling on wires; disconnect connectors by their housings, not the wires
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP65275-6
Replacement screw 6-pack for securing refrigerator panels, brackets, and components. Replace missing, stripped, or damaged screws to keep parts firmly attached.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488234
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61003826
This is a small roller wheel designed to support and allow smooth movement of components inside a refrigerator cabinet. It typically mounts on a bracket to help drawers, shelves, or other sliding parts glide easily. Replace this roller if a drawer or shelf is difficult to slide, makes scraping noises, or the wheel is cracked, flat-spotted, or no longer turns freely.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 415013-35
This genuine replacement screw secures appliance panels and trim so covers, consoles, and components stay firmly in place for safe, quiet operation. It replaces worn or missing fasteners to restore proper fit and reduce vibration and rattling. What it does:
- Secures control panels, trim pieces, or access panels to the appliance frame
- Keeps panels aligned to prevent gaps and light leaks
- Reduces vibration-related noise from loose panels or components
- Helps maintain safe operation by keeping covers and guards properly attached
What's included:
- The replacement screw shown/listed
Install notes:
- Disconnect power to the appliance before servicing to avoid shock or injury
- Use the correct screwdriver or driver bit to avoid stripping the head
- Start the screw by hand to ensure proper thread engagement, then tighten securely but do not overtighten
Do-It-Yourself Stories from Customers like You
Ice door flapper no longer closed all the way; warm air would get into ice dispenser/holder and melt ice closest to opening causing pooling water and ice dams Camille C. • Pawtucket , RI • September 16, 2019
Repair was super-easy following the appliancepartspros.com video! I followed it step-by-step and was done in less than 10 minutes! Saved at least $100 by not having an appliance repair person come in... not to mention a ton of time!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 61005388
Replacement mounting screw for securing freezer panels, brackets, and components. Restores proper fastening where original screw is missing, stripped, or damaged.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3-24838-048
Replacement mounting screw for freezers and refrigerators. Secures internal components and panels. Order a new screw if original is stripped or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489399
Genuine Whirlpool part
By: Whirlpool
Part Number: 61003647
Replaces worn or broken refrigerator door closer cam that installs at the bottom hinge. Restores smooth door action when the original is cracked or damaged.
Do-It-Yourself Stories from Customers like You
Door not closing properly Dan T. • Boring , OR • January 03, 2015
Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes.
Read more
More
$6.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015
Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$7.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP854334
This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:
- Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
- Helps prevent moisture buildup and improves energy efficiency when sealing is restored
- Reduces rattling and vibration caused by a compressed or torn seal edge
- Commonly replaced when the strip is torn, missing, or no longer adheres properly
What's included:
Install notes:
- Disconnect power to the appliance before servicing to avoid electrical or burn hazards
- Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
- Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions
More
$8.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627843
Ice cubes stuck in tray and won't eject? This ejector arm pushes ice from the mold into the bin. Simple snap-in install restores ice production.
More
$50.57
Out Of Stock
Usually ships within 4 - 14 days