Mvw7232hwo Parts

This 3-coil dispenser wiring harness connects the dispenser controls to the refrigerator's dispenser and ice/water components, restoring reliable electrical signals for proper dispenser operation. It replaces damaged or worn dispenser wiring. What it does:

• Provides three insulated conductors to route power and signals between the dispenser control and dispenser components
• Restores interrupted dispenser function when wires are broken, frayed, or connectors are loose
• Helps eliminate intermittent dispenser operation or non-responsive dispenser buttons
• Prevents short circuits caused by exposed or pinched wiring when installed correctly

• One 3-coil dispenser wiring harness with factory-style connectors

• Disconnect power to the appliance before starting any repair
• Access may require removing the dispenser housing or interior panels; keep fasteners organized
• Match connector shapes and pin counts; do not force connectors to mate
• Inspect adjacent wiring and secure the harness away from sharp edges or moving parts

This UI mounting harness secures and connects the user interface to the appliance's control system, restoring reliable button/board communication and keeping the display/control assembly properly positioned. Designed for VMAX 2.0 UI assemblies. What it does:

• Routes and secures UI wiring so buttons, lights and the display communicate with the control board
• Prevents strain or chafing on UI connector wires that can cause intermittent or failed controls
• Helps eliminate loose or sagging control assemblies and related operational issues
• Works with VMAX 2.0-style user interface assemblies to maintain proper alignment and connection

• Disconnect power before starting any repair to avoid shock or damage
• Handle connectors and ribbon cables gently to avoid bending pins or damaging flex circuits
• Verify connector seating and secure the harness mounting points per OEM guidance

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

Color: White

Color: Grey

This brace is a replacement mounting bracket that helps secure internal components and cabinet panels so moving parts stay aligned and your appliance operates more quietly and reliably. Simple, direct fit for service repairs. What it does

• Stabilizes and holds panels or assemblies in place to reduce vibration and movement
• Restores proper alignment of connected components for smoother operation
• Helps stop rattling or shifting that can cause noise during use
• Used when a bent, broken, or missing bracket is causing loose parts

• One brace

• Disconnect power (and water if applicable) before servicing the appliance.
• Remove the access panel or cabinet section needed to reach the damaged bracket.
• Replace the bracket using the original mounting screws and hardware; tighten securely but avoid overtightening.

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

The Motor Rotor is an OEM part for Whirlpool electric top-loading washers. Located internally at the center of the washer basket, it transmits power from the motor to spin water from clothes during extraction cycles.  

Symptoms of a faulty motor rotor include: 

• Slow or inefficient spin that leaves clothes dripping wet   
• Abnormal vibrations felt from the tub during spin
• Premature winding motor sounds due to rotor imbalance

Causes involve normal wear from years of moving wet laundry loads. Damage could also occur from objects left in pockets that damaged the rotor during spin.

This OEM replacement is compatible with additional Whirlpool, Kenmore, and Maytag top-loading washers.

This leveling foot threads into the base of your appliance to support and stabilize it. Adjusting the foot helps level the cabinet, reduce wobble and vibration, and keep doors aligned for smooth, reliable operation. Also called a leveling leg. What it does:

• Provides an adjustable contact point to stabilize the unit on the floor
• Helps level the cabinet so doors align and seal properly
• Reduces rocking, rattling, or excessive vibration on uneven surfaces
• Replaces a cracked, stripped, or missing leveling leg

• 1 leveling foot

• Unplug the appliance and turn off water supply if applicable
• Use a helper to carefully move or tilt the unit; support it securely
• Unthread the damaged foot; thread in the new foot by hand, then fine-adjust with a wrench
• Level side-to-side and front-to-back; ensure all feet make firm floor contact

The Stator is an OEM component specifically designed for Whirlpool washing machines. It is the stationary part of the washer motor that induces a magnetic field, causing rotation in the rotor and driving the agitator or basket movement. 

Symptoms of a bad stator include: 

• The washer not agitating or spinning clothes during cycles  
• Loud grinding or knocking noises from the motor area
• The washer needs to be reset frequently
• Slow or inconsistent agitation or spin speeds

Causes of a stator failing include normal wear and tear of internal electric components over many usage cycles. Replacing with this genuine Whirlpool part helps maintain dependable washing performance.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replacing worn internal parts like the stator proactively prevents potential future washer motor issues.

The Spanner Nut is an OEM part for Whirlpool washing machines. As a critical component, the spanner nut attaches and secures the rear bearing housing to the tub assembly. It maintains proper alignment of internal components and prevents misalignment that can lead to failure. 

Causes of a bad spanner nut can include wear and tear over time, stripping of threads due to over-tightening, or damage from impact or corrosion.  

Symptoms of a bad spanner nut include:

• Vibration or excessive noise during spin cycles
• Rubbing or grinding noises from internal components  
• Reduced spin efficiency and unbalanced loads
• Premature failures of other components like belts or bearings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore washing machine models.

This replacement water inlet valve controls the flow of water into the appliance, restoring proper fill operation and preventing overfill or no-fill conditions. Fits the OEM inlet-valve location and restores timed water delivery. What it does:

• Opens and closes to allow water into the appliance when the control signals a fill cycle.
• Replaces valves that fail to open (no fill) or that stay open (continuous fill).
• Stops or reduces water flow when solenoids close, helping prevent overfilling and intermittent filling.
• Common symptom linkage: appliance won't fill, fills slowly, fills continuously, or leaks at the valve connection.

• Disconnect power and shut off the water supply before starting; relieve water pressure by running a short cycle or opening a faucet.
• Handle electrical connectors and solenoid terminals carefully; avoid pulling on wires.
• Inspect and replace any damaged inlet hoses, gaskets, or mounting hardware when present.
• After installation, restore water and power, then test several fill cycles and check all connections for leaks.