Mvwb835dwo Parts

The Lid Hinge is an OEM part for Whirlpool washers. It is specifically designed to be the left-side hinge for the washer lid, allowing for smooth opening and closing of the lid. The lid hinge ensures proper alignment and stability of the lid, providing easy access to the washer drum.  

A bad lid hinge can occur due to regular wear and tear, accidental damage, or mishandling. If you notice symptoms such as the lid not closing properly, difficulty in opening or closing the lid, or excessive movement or wobbling of the lid, it may be time to replace this part.

Symptoms of a bad lid hinge include:

• Lid not closing properly
• Difficulty in opening or closing the lid
• Damaged spring

Restore your Whirlpool washer's lid by replacing the worn or damaged lid hinge with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Dispenser Housing is an OEM part for Whirlpool washing machines. It serves as the mount for dispensers containing fabric softener and detergent. 

Causes of bad dispenser housing involve cracks emerging over time, and distorted openings meant for smooth draws.

Symptoms include:  

• Dispensers falling out of place or prematurely discharging contents  
• Disrupted metering from housing leaks along its mounting connections   
• Loosened assembly allowing dispensers to tip during agitation 

This OEM Whirlpool part is also compatible with some Maytag, Amana, and Frigidaire washers.

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Bezel is an OEM part compatible with Whirlpool washing machines. This trim piece secures the control console interface within the cabinet opening. Proper mounting provides seamless integration for an aesthetically pleasing appearance.  

Causes of a bad bezel stem from environmental damages over time like cracks or discoloration from cleaning chemicals near the buttons. Repeated impact nicks and dents compromise structural integrity as well.

Symptoms of a bad bezel include:

• Loose hanging appearance no longer firmly fitted  
• Gaps forming entry points for lint and moisture damage
• Detached sections at risk of falling off entirely
• Visual deterioration marring overall style

This Whirlpool replacement bezel restores the finish and protects internal components. It is compatible with brands including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This outer washer tub is the main exterior tub that surrounds the inner wash basket, helping contain water and support the tub assembly for dependable washing performance. It restores the washer's water-sealing and structural support. What it does:

• Houses the inner tub and helps contain wash water to prevent leaks
• Provides structural support for the tub assembly and associated seals/bearings
• Works with the inner basket, seals, and suspension to maintain proper wash action
• Can address symptoms such as visible leaks from the tub area or excessive tub movement/noise

• One outer tub (single piece as shown)

• Refer to your model's service manual for step-by-step removal and reassembly and follow OEM torque and seal replacement guidance
• Replace any worn seals, gaskets, or mounting hardware during installation to ensure a proper water-tight fit
• Disconnect power and water supply before beginning service to avoid shock or flooding
• Inspect those components and replace as needed

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

The Lid Hinge is an OEM part for Whirlpool washing machines. It connects the lid to the washing machine body, allowing the lid to open and close smoothly. This hinge ensures the lid remains securely attached while providing the necessary movement for easy access to the washer drum.

Common causes of a bad lid hinge include repeated use over time, accidental impact, or corrosion from exposure to moisture. These factors can cause the hinge to become loose, stiff, or broken.

Symptoms of a bad Lid Hinge include:

• Difficulty opening or closing the lid
• The lid not staying open or falling shut unexpectedly
• Unusual noises when moving the lid
• Visible damage or rust on the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This sound absorber is an OEM-style insulation pad designed to reduce washer cabinet noise and rattling for a quieter cycle. It mounts inside the appliance cabinet to help dampen vibration and airborne sound. What it does:

• Dampens vibration and reduces cabinet noise during spin and agitation
• Helps minimize rattling from internal components for a quieter operation
• Supports stable operation by providing a cushioned barrier between parts and the cabinet
• Commonly replaced when padding is torn, missing, or compressed

• One sound absorber insulation pad

• Disconnect power and water supply before starting any repair
• Access may require removing outer cabinet or panels; follow your model's service manual
• Use proper fasteners and placement as shown in OEM diagram; avoid altering material