Mvwx655dw Parts

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid Hinge is an OEM part for Whirlpool washing machines. It connects the lid to the washing machine body, allowing the lid to open and close smoothly. This hinge ensures the lid remains securely attached while providing the necessary movement for easy access to the washer drum.

Common causes of a bad lid hinge include repeated use over time, accidental impact, or corrosion from exposure to moisture. These factors can cause the hinge to become loose, stiff, or broken.

Symptoms of a bad Lid Hinge include:

• Difficulty opening or closing the lid
• The lid not staying open or falling shut unexpectedly
• Unusual noises when moving the lid
• Visible damage or rust on the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This complete lid assembly replaces a damaged or broken washer top lid to restore secure closure and normal user access. It provides the hinged cover and latch interface needed for safe, splash-resistant operation. What it does:

• Replaces a cracked, warped or cosmetically damaged lid to restore proper sealing and appearance
• Provides the hinged cover and latch mounting points so the lid closes and stays secure during cycles
• Helps reduce splashing and keeps items contained in the wash tub
• Restores normal user access to the wash basket and controls area

• Disconnect power before starting any repair to avoid shock or injury
• Support the lid assembly during removal and installation to prevent dropping or damage
• Basic hand tools may be required; follow the OEM instructions for hinge and latch alignment

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This dispenser is the exterior door component that delivers chilled water and/or ice from the refrigerator, restoring normal dispensing and preventing drips or jams. It replaces a damaged, cracked or non-functioning door dispenser. What it does

• Guides water and ice from the internal plumbing to the exterior spout so items can be dispensed from the door.
• Re-establishes a secure spout and actuator for reliable dispensing and reduced leaks.
• Stops common dispenser symptoms such as leaking at the door, stuck or loose dispenser lever, and misaligned spout.
• Helps restore normal dispensing when the door dispenser is cracked, broken, or no longer seating properly.

• One dispenser assembly.

• Disconnect power and shut off the refrigerator water supply before beginning.
• Remove the interior door panel and any trim to access the dispenser assembly; keep fasteners organized for reassembly.
• Inspect and replace any worn gaskets or seals to prevent leaks; ensure proper hose routing.
• Test operation and check for leaks after reconnecting power and water.

This replacement power cord restores the appliance's primary electrical connection so it can receive power safely. Use it when the original cord is damaged, frayed, or no longer providing a reliable connection. What it does:

• Provides the main incoming electrical connection from the wall outlet to the appliance
• Replaces cords with visible damage, exposed wiring, or intermittent power delivery
• Can resolve no-power or power-interruption symptoms when the cord is the fault
• Ensures a secure connection when installed with the correct strain relief and terminal fastening

• Disconnect the appliance from power before attempting any service.
• Remove access panels as needed to reach the cord terminals; note wire locations before disconnecting.
• Secure cord with the appliance's strain relief and tighten terminal connections per the factory layout.

This outer cabinet top panel replaces the appliance's upper exterior surface to restore a clean, stable top and protect internal components. It matches OEM fit and finish for proper alignment and appearance. What it does:

• Covers and protects the appliance's upper cabinet from spills, scratches, and general wear
• Provides a flat, stable surface for items placed on top of the appliance
• Restores proper edges and mounting points so control and trim pieces align correctly
• Helps prevent exposure of internal components to dust and debris

• One outer cabinet top panel

• Disconnect power (and water, if applicable) before starting any repair
• Handle panel edges carefully to avoid cuts and cosmetic damage
• Requires basic hand tools; keep all fasteners removed from the old panel for reuse if undamaged

This replacement top panel restores the appliance's upper cabinet surface and provides a stable, finished cover for internal components. It helps protect internal parts from debris and gives your machine a clean, factory appearance. What it does:

• Covers and protects the appliance's internal components located under the cabinet top
• Restores a flat, stable surface for items placed on the appliance
• Replaces bent, dented, or damaged tops that can allow dust or moisture inside
• Helps maintain proper alignment of control and trim pieces that mount to the top

• One replacement top panel as shown

• Basic disassembly of the control console or rear trim may be required; your model's service instructions
• Use appropriate hand tools; support the cabinet top during removal to avoid damage
• Disconnect power (and gas if applicable) before beginning work to ensure safety