Mvwx655dwi Parts

This lower wiring harness connects the dryer's lower electrical components so the machine can tumble and heat reliably. It replaces a damaged or worn harness to restore proper electrical connections and safe operation. What it does

• Provides factory-style wiring connections between the control/motor area and lower components (motor, heater/gas valve and sensors)
• Restores power/communication when broken, burned, or corroded wires cause no-start or intermittent operation
• Helps correct symptoms like no tumble, no heat, or intermittent runs when traced to the lower wiring
• Matches OEM routing and connectors to ensure proper fit and electrical contact

• One lower wiring harness

• Disconnect power (and gas supply for gas dryers) before beginning any repair
• Compare the replacement harness to the original to ensure connector types and routing before installation
• Route and secure the harness with existing clips/retainers; avoid pinching or stretching wires
• If you find melted connectors or damage to other components, replace those parts as recommended by the OEM

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement brace reinforces appliance cabinet structure to restore proper alignment and reduce vibration. It helps maintain secure mounting of adjacent panels so doors and controls operate smoothly. What it does:

• Provides structural support for the appliance cabinet and connected panels
• Reduces rattling or vibration caused by loose or bent cabinet components
• Helps realign panels that are pulling away or not closing flush
• Useful when visible damage, bending, or missing support causes fitment issues

• Disconnect power and, if applicable, gas supply before starting any repair
• Remove outer cabinet panels or access panels to reach the brace mounting points
• Retain original fasteners when possible; replace damaged screws or clips as needed

This complete lid assembly replaces a damaged or broken washer top lid to restore secure closure and normal user access. It provides the hinged cover and latch interface needed for safe, splash-resistant operation. What it does:

• Replaces a cracked, warped or cosmetically damaged lid to restore proper sealing and appearance
• Provides the hinged cover and latch mounting points so the lid closes and stays secure during cycles
• Helps reduce splashing and keeps items contained in the wash tub
• Restores normal user access to the wash basket and controls area

• Disconnect power before starting any repair to avoid shock or injury
• Support the lid assembly during removal and installation to prevent dropping or damage
• Basic hand tools may be required; follow the OEM instructions for hinge and latch alignment

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This dispenser is the exterior door component that delivers chilled water and/or ice from the refrigerator, restoring normal dispensing and preventing drips or jams. It replaces a damaged, cracked or non-functioning door dispenser. What it does

• Guides water and ice from the internal plumbing to the exterior spout so items can be dispensed from the door.
• Re-establishes a secure spout and actuator for reliable dispensing and reduced leaks.
• Stops common dispenser symptoms such as leaking at the door, stuck or loose dispenser lever, and misaligned spout.
• Helps restore normal dispensing when the door dispenser is cracked, broken, or no longer seating properly.

• One dispenser assembly.

• Disconnect power and shut off the refrigerator water supply before beginning.
• Remove the interior door panel and any trim to access the dispenser assembly; keep fasteners organized for reassembly.
• Inspect and replace any worn gaskets or seals to prevent leaks; ensure proper hose routing.
• Test operation and check for leaks after reconnecting power and water.

This replacement top panel restores the appliance's upper cabinet surface and provides a stable, finished cover for internal components. It helps protect internal parts from debris and gives your machine a clean, factory appearance. What it does:

• Covers and protects the appliance's internal components located under the cabinet top
• Restores a flat, stable surface for items placed on the appliance
• Replaces bent, dented, or damaged tops that can allow dust or moisture inside
• Helps maintain proper alignment of control and trim pieces that mount to the top

• One replacement top panel as shown

• Basic disassembly of the control console or rear trim may be required; your model's service instructions
• Use appropriate hand tools; support the cabinet top during removal to avoid damage
• Disconnect power (and gas if applicable) before beginning work to ensure safety