Mzf34x18ffw06 Parts

This start device is the compressor start relay that helps the refrigerator compressor start reliably so the appliance can cool properly. It replaces a failed relay to restore normal compressor startup behavior. What it does:

• Provides the initial electrical boost to the compressor motor during startup
• Helps the compressor overcome inertia so the refrigeration cycle can begin
• Commonly used when a compressor hums or won't start but power is present
• Addresses symptoms such as no cooling, frequent clicking from the compressor area, or a compressor that runs briefly then stops

• One (1) start device / compressor start relay

• Disconnect power to the appliance before accessing electrical components
• Replace only with the correct part number or direct OEM equivalent
• Inspect compressor terminals and wiring for heat damage; replace damaged wiring as needed

The Invrtr-box is an OEM component compatible with Whirlpool refrigerators. Located inside the refrigerator cabinet, usually behind side paneling, this box houses the electronic inverter that regulates power to key components like the compressor. 

Symptoms of a bad inverter box include:

• Refrigerator failing to cool/freeze properly
• Compressor not running regularly or making strange noises  
• Difficulty maintaining set temperatures
• Randomly tripping breakers or power issues

Causes can be gradual wear of internal electronic modules over many years of use. Damage from impacts during repairs/installations is also possible.  

This OEM replacement is compatible with models including Kenmore, KitchenAid, Maytag, and more for a direct-fit installation.

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

Sealer for refrigerant line insulation.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.

This genuine replacement screw secures panels and components so your appliance stays stable and trim pieces fit properly. It's a simple, exact-fit fastener intended to replace a missing or damaged mounting screw. What it does:

• Fastens panels, trim, control housings or brackets to the appliance frame
• Restores secure fit when a screw is missing, stripped, or corroded
• Helps eliminate rattling or loose panels caused by a missing fastener
• Matches OEM thread and head style for correct seating and torque

• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until parts are firmly seated
• Disconnect power and follow appliance safety guidelines before servicing

This genuine replacement clip secures small appliance components in place to prevent rattling and part separation. It restores proper alignment so panels, trim, or internal assemblies stay firmly fastened during normal use. What it does:

• Fastens and retains panels, trim, or small assemblies to the appliance frame
• Prevents parts from shifting, vibrating, or causing operational noise
• Helps maintain proper alignment of connected components
• Commonly replaced when clip is cracked, missing, or no longer holds

• One replacement clip

• Disconnect power (and gas if applicable) before servicing the appliance
• Use needle-nose pliers or a flat tool to remove and install the clip; avoid excessive force
• The clip seats fully in its mounting slots and secures the mating part

This evaporator wire harness routes power and signals to the freezer evaporator components so the cooling and defrost systems operate correctly. It replaces a damaged or disconnected harness to restore circuit connections behind the evaporator. What it does:

• Provides electrical connections to evaporator components such as the defrost heater, thermostat/thermistor, and fan motor
• Ensures consistent signaling for defrost cycles and evaporator fan operation
• Helps stop symptoms like a warm freezer, intermittent cooling, or failed defrost when caused by wiring faults
• Maintains proper routing and secure connector fit to prevent shorts or intermittent contacts

• One evaporator wire harness assembly

• Disconnect power to the appliance before starting any repair
• Remove evaporator cover panels carefully; avoid bending evaporator fins
• Match connector shapes and routing to the original harness; secure away from moving parts

Size: 1/4 lb.

Color: White

This drive coupler connects the washer motor to the transmission so the agitator or drum turns smoothly. It's a direct-replacement part that restores drive engagement when the original coupler is worn or damaged. What it does

• Transfers motor rotation to the transmission/agitator so the tub agitates or spins.
• Commonly replaced when the washer won't agitate, spin, or makes grinding or clunking noises.
• Resists normal wear from torque and repeated use; failure causes slipping or loss of drive.
• Helps prevent further damage to the motor or transmission when replaced at first signs of wear.

• One drive coupler

• Disconnect power and water supply before beginning any repairs.
• Access typically requires removing the cabinet or front panel; follow the manufacturer service manual.
• Inspect motor shaft and transmission input for damage when replacing the coupler.
• If transmission or motor splines are damaged, replace the damaged assembly rather than relying on a new coupler.

This evaporator fan motor drives the fan that circulates chilled air across the evaporator coils and through the cabinet, helping maintain even, stable temperatures and consistent cooling performance.

• Moves air across the evaporator coils and through the vents for uniform cooling
• Helps the refrigerator recover temperature after door openings
• Common symptoms of a failing motor: fresh food section warmer than the freezer, little or no airflow from vents, fan not running with the door switch pressed, or loud/abnormal fan noise
• Supports overall system efficiency by keeping air moving around stored items

• Disconnect power to the appliance before servicing
• Transfer and reuse the original fan blade, bracket, grommets, and screws if your model uses them
• Clear any frost or obstructions from the fan shroud and surrounding area before reassembly
• After reassembly, restore power and press the door switch to confirm the fan runs and airflow is present

The Evaporator Coil is an OEM part for Whirlpool refrigerators. It is responsible for absorbing heat from the refrigerator interior as refrigerant passes through its fine tubes and fins. Cool air is then circulated through convection to maintain consistent temperatures.

Causes of a bad evaporator coil can include mineral deposits or frozen moisture clogging fins over time, physical damage to tubes, or corrosion of metal surfaces.

Symptoms of a bad evaporator coil include:  

• Inability to decrease interior temperatures sufficiently  
• High energy bills due to inefficient heat transfer
• Abnormal ice buildup inside due to poor airflow
• Warm or lukewarm areas inside the refrigerator compartment

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, KitchenAid, and some GE models.

This outer decorative door trim restores the finished edge and appearance of a refrigerator/freezer door, covering gaps and protecting the door edge from damage. It helps maintain a clean, sealed look and improves door aesthetics. What it does:

• Replaces damaged, cracked, or missing outer door trim for a finished appearance
• Covers and protects the door edge from nicks and wear
• Helps keep the door gasket sitting properly at the edge to reduce visible gaps
• Commonly needed when trim is broken, warped, or cosmetically worn

• Disconnect power to the appliance before beginning any repair to avoid injury.
• Installation typically requires removing the door or inner components; keep fasteners and parts organized.
• Use gentle prying to release clips or trim retainer; avoid forcing to prevent damage to surrounding surfaces.

This control box is the appliance's main electrical control that manages cycles and user-interface signals, restoring proper electronic control when the original module fails. It replaces a faulty module to help appliances respond correctly to commands. What it does:

• Controls and coordinates cycle operations, timers, and electronic functions
• Sends and receives signals between the user interface and mechanical components
• Can address symptoms such as no response to controls, display/indicator issues, or erratic cycle behavior
• Functions as the appliance's primary electronic control module for reliable operation

• 1 control box

• Disconnect power before starting any repair to avoid electrical shock
• Handle the board carefully; avoid static discharge and do not touch circuitry
• Confirm connector orientation and secure all wiring during reassembly