Pb130gpxv Parts

This clutch cable kit is an authentic OEM replacement part for a riding lawn mower or tractor. The clutch cable connects to the idler arm located in the lower deck of a mower and allows the operator to manually engage or disengage the blades. The clutch cable runs up through the steering block and into the front display so that the operator can easily access the clutch. If a clutch cable becomes jammed or tenses up, it will be difficult to depress. If the operator tries to depress the clutch cable without realizing that it is jammed, the clutch cable will snap. The most obvious sign of a snapped clutch cable is that the clutch gives little resistance and the blade cannot be engaged. To change a clutch cable, use a socket set to remove the fuel tank and gain access to the cable. A pair of needle nose pliers is also recommended. This replacement part is compatible with Weed Eater, Husqvarna, Ryobi, and Poulan appliances and comes sourced from its original manufacturer. This part includes a clutch cable and a zip tie.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Flat idler pulley for riding mowers and lawn tractors. Works with the belt to transfer power from engine to drive system. Replace if cracked or worn.

Replaces cracked, rusted, or damaged muffler on riding mowers. Reduces exhaust noise and prevents sparks from igniting debris on the ground.

Lawn tractor won't start when you turn the key? This starter solenoid links your battery to the starter motor. Common DIY fix for no-crank issues.

This part is a right-hand spindle assembly that is used on lawnmowers. A spindle assembly is a post that the blade attaches to. It spins when the machine is operating. This specific spindle assembly is for the right-hand side.A new right-handle spindle assembly will be needed if the original is cracked, broken, bent, or damaged in any way. The lawnmower operator may notice that the blades are not cutting evenly, are cutting in a disorganized fashion, or are not spinning at all. The machine may also make loud cracking noises. Remember to wear gloves when handling or performing care and maintenance on any outdoor power equipment machines.This right-hand spindle assembly is a genuine Husqvarna part. It is sold individually. This particular spindle assembly is compatible with the right-hand side of lawnmowers that are manufactured by the Husqvarna brand.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

Mower won't start or starter doesn't engage? This ignition switch activates your riding mower's electrical system. Simple DIY repair in under 30 minutes.

Replacement fuel tank for front-engine lawn tractors and riding mowers. Installs to store fuel. Replace if cracked, damaged, or leaking.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

Shoulder bolt that attaches the suspension arm to the wheel bracket on riding mowers and tractors. Replace if bolt is stripped, worn, or missing.

Mechanical clutch cable for riding mowers with lever-operated transmissions. Replace if cable is frayed, stretched, broken, or no longer engages smoothly.

Plastic shift knob for riding mower ground drive control. Mounts on shift rod with 1/2-inch hole. Replace if cracked, broken, or missing for proper gear control.

Replacement muffler for front-engine lawn tractors. Installs on the engine exhaust system. Replace if cracked, rusted, or leaking exhaust gases.

Idler pulley for riding mower tractors guides and maintains tension on drive belts. Replace if wobbling, squeaking, or belt slips. Verify fit with model number.