Pb130gpxv Parts

Secures the mower blade to the spindle on riding mowers and tractors. Replace if bolt is stripped, washer is damaged, or hardware is missing.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

Steering shaft connects the steering wheel to the gearbox on riding mowers and lawn tractors. Replace if bent, cracked, or worn for proper steering control.

Plastic flanged bearing for riding mower steering columns. Replace if you hear squeaking or feel loose steering. Verify fit with your model number.

Protects wheel hub and lug nuts from dirt and grime on riding mowers and tractors. Simple snap-on installation takes minutes with basic tools.

Can't see while mowing at dusk or dawn? This riding mower headlight switch controls your tractor's illumination system. Direct-fit replacement.

This replacement deflector shield is a genuine OEM part intended for use on lawn mowers and tractors. It attaches to the side of the mower and directs grass clippings away from the blade as it mows. This serves to keep grass from bunching up in the blade, which could cause it to stall out. The direction of the deflector shield also blows grass clippings behind the mower to keep any potentially hazardous debris from flying up at the mower. Deflector shields can become dried out and brittle over time and can snap off if the mower drives too close to a wall, tree, or other hard object. Deflector shields usually only need replacing if they break. This would cause grass clippings and debris to fly in all directions, which could be dangerous for the user. Replacing the deflector shield is an easy repair and only requires a socket wrench set. This part is compatible with a wide variety of Husqvarna and Craftsman lawn mowers and tractors and is sourced from the original manufacturer. This product ships individually.

Replacement muffler for front-engine lawn tractors. Installs on the engine exhaust system. Replace if cracked, rusted, or leaking exhaust gases.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This replacement part is a V-belt. It is a genuine replacement part made by Husqvarna. This specific belt is typically found near the engine of many types of lawnmowers. V-belts work together with the transmission of the machine.A new V-belt might be needed if the user hears unusual noises coming from inside the machine. This can mean that the belt is stretched out or torn from years of normal use. It is also possible that the belt is damaged in other ways and is unable to perform the movements needed. As this part is close to the engine, be sure the appliance is completely turned off before starting this repair. This belt is a genuine OEM replacement part. Note that it is sourced directly from the manufacturer and is also sold individually.

Mandrel pulley for riding mower and tractor mower decks. Replaces worn, cracked, or damaged pulleys on the spindle assembly. Essential deck component.

Mandrel spacer washer for riding mowers and lawn tractors. Installs between drive pulleys to maintain proper alignment and spacing. Replace if worn or missing.

Hardened washer for lawn tractors and riding mowers. Installs with bolts to redistribute pressure and prevent loosening. Replace if worn or missing.

Idler pulley for lawn tractor mower decks. Creates tension on the drive belt. Replace if worn, cracked, or damaged from debris accumulation or impact.

Here is a left-hand draglink that is used specifically for riding mowers and garden tractors. The draglink is an essential part of the mower used to connect the gear selector plate to the spindle. This ensures that the driver can steer the mower. The part is made from metal, and it is highly durable. However, there is always the chance that part of it could break or that it could become corroded. If this happens, and the draglink breaks, it will be impossible to steer the mower. If there are any issues with the draglink, owners should replace it right away. It may be a good idea for the owner to replace the right-hand draglink at the same time. This is a genuine OEM replacement left-hand draglink. It is important for buyers to keep in mind that the left-hand draglink is sold individually. It does not include the right-hand draglink, or the hardware needed to add it to the mower. The part is compatible with more than 150 machines from Husqvarna, Ariens, Craftsman, and Poulan.

Idler pulley for riding mowers and tractors. Maintains proper belt tension for drive system. Replace if pulley is cracked, worn, or spinning rough.