Pbg995detww Parts

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.

This genuine OEM replacement washer is a specially hardened washer to provide more support for a wide range of different lawn appliances. Washers are usually used in conjunction with a nut and a bolt and act as a barrier between those two parts. Washers help to redistribute pressure to prevent the bolt from giving out over time, as well as to provide a stronger grip. Washers can begin to corrode over time, and when this happens, the washer can fuse together with the bolt or nut. This would make the connection difficult to disengage in the case of a bigger repair. It is good practice, then, to replace washers anytime the nut or bolt is also replaced. This way, all parts age at the same rate and will not have to be individually changed out. Use a wrench to unthread the nut and change out a washer. This part is a top of the line replacement washer for a Husqvarna, Weed Eater, Ryobi, Jonsered, or Poulan engine. It comes sourced from the original manufacturer and does not include any other hardware.

This is an idler pulley meant to be used on many brands of lawn tractor or mower. It is designed to create tension on the drive belt, and it can wear with years of use or be damaged by a blow to the mower deck or by an over-accumulation of debris that causes it to become jammed. To repair or replace this genuine OEM part, it requires pliers and a wrench. The steps used include removing the mower deck, removing the bolt securing the pulley and drive belt, removing the washer and bolt from the pulley, and replacing it with a new one. Then, the original or a new belt can be installed before the mower deck is restored. This parts fits with mowers, trimmers, and tractors sold by brands like Husqvarna, Poulan, Weed Eater, and Jonsered. It ships individually and is made of durable plastic.

Here is a left-hand draglink that is used specifically for riding mowers and garden tractors. The draglink is an essential part of the mower used to connect the gear selector plate to the spindle. This ensures that the driver can steer the mower. The part is made from metal, and it is highly durable. However, there is always the chance that part of it could break or that it could become corroded. If this happens, and the draglink breaks, it will be impossible to steer the mower. If there are any issues with the draglink, owners should replace it right away. It may be a good idea for the owner to replace the right-hand draglink at the same time. This is a genuine OEM replacement left-hand draglink. It is important for buyers to keep in mind that the left-hand draglink is sold individually. It does not include the right-hand draglink, or the hardware needed to add it to the mower. The part is compatible with more than 150 machines from Husqvarna, Ariens, Craftsman, and Poulan.

This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This grease fitting is a genuine Husqvarna part, sold individually. This grease fitting can be used as a replacement part in a lawn mower. The purpose of a grease fitting in a lawn mower is to allow the lubrication of one or more components within the internal machinery of the lawn mower while regulating the amount of lubricant and ensuring that no overflowing or leaking occurs.The grease fitting in a lawn mower might need to be replaced if the grease fitting fails to prevent leakages or overflowing or if the grease fitting can no longer channel and facilitate the lubrication process. This could occur if the grease fitting is damaged to the point of reduced or no functionality or if the grease fitting is lost or misplaced, in which case it should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This grease fitting is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This is a shoulder bolt, which is similar in appearance to a screw, but without any threading. It features a shoulder that enables it to rotate, or for parts attached with it to rotate. It is commonly found in gears, pulleys, and moving parts inside many mechanical assemblies, as well as engines. It is also used in many wheel assemblies. It is a good idea to always have at least one spare shoulder bolt on hand as they do wear frequently and will require replacement at least once during the lifespan of a lawnmower. Sometimes known as stripper bolts, the head on these genuine replacement parts have the largest diameter on the part and a screw-like assembly at the bottom. Installation will require a screwdriver. This OEM part works in Husqvarna, Craftsman, Poulan, and Ariens equipment. It is just under 3 in length and roughly 1.2 in diameter. It is designed for a wide array of lawnmower models from the manufacturers mentioned and will secure a gauge wheel to the bracket. This part is sold individually as a replacement part.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower or a lawn tractor.The tire for a lawn mower or a lawn tractor might eventually have to be replaced if it shows signs of damages that cannot be fixed by a basic repair. If the tire has been damaged, it should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Weed Eater, and Craftsman.

This part is a front rim assembly for riding lawnmowers. A rim assembly holds the tube and the tire and attaches the wheel to the spindle assembly. This rim assembly is manufactured out of a high-quality, durable material. A new rim assembly may be needed if the original has been cracked, broken, or damaged in any way so that it cannot function as it is designed to. The rim assembly may need to be replaced because of normal wear and tear over time.The replacement process is somewhat difficult and takes approximately 30 to 60 minutes to complete. A screwdriver, pliers, and wrench set will be needed for this replacement. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This front rim assembly is a genuine Husqvarna part. It is sold individually. This particular front rim assembly is compatible with lawn tractors that are manufactured by Husqvarna and Jonsered.

An interlock switch is responsible for shutting down the engine if the equipment is running in an unsafe manner. It is a safety component that prevents the engine from starting if you aren't pressing down the brake with your foot or if the parking brake isn't in place. If the interlock switch beaks, the current will no longer reach the solenoid coil even if the brake is depressed. This will result in the engine not starting. If turning the ignition key doesn't result in the click of the solenoid, the damaged part is likely the interlock switch. The first step is to disconnect the battery and then release the steering plate. Next, remove the interlock switch under the hood and install the new one. At this point, the other parts can be reinstalled, and the lawn mower can be used. This is a genuine manufacturer-approved OEM part that is designed for Husqvarna, Ryobi, Craftsman, Dixon, Weed Eater, Murray, Ariens, and Poulan lawn mowers. This interlock switch is made with a high-quality plastic body and is sold as an individual component. A screwdriver will be required to make this replacement.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This washer is a genuine Husqvarna part manufactured for use with lawnmowers. It is also compatible with lawn tractors, garden tractors, riding tractors, and other similar equipment. It is a hardened flat washer that is rather large compared to other washers. This washer is often used to attach the mower deck to the mower itself. Removing it is often part of a larger repair, and a screwdriver or socket wrench may be required to make this replacement. It is not unusual for washers and other hardware to experience wear and tear, especially if the mower gets heavy use. It may also need to be replaced if it becomes damaged while making other repairs.This washer is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check how many are needed and order accordingly. It is compatible with equipment manufactured by Ariens, Craftsman, Dixon, Husqvarna, Murray, and Craftsman.