Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
Thermal insulation that fits between inner and outer oven door panels along the side edge. Replace when burnt, brittle, cracked, or missing from wear.
Replaced the insulation and followed oven door removal video on YouTube. Read more
Gas supply tube connects gas line to range burners. Replace if cracked, kinked, damaged, or leaking. Installs between supply valve and burner assembly.
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more
Seals the right edge of your electric range cooktop to prevent spills from entering the chassis. Replace if worn, cracked, or no longer sealing properly.
Pulled the front cover off. Disconnected the wires to the control panel. Lifted the top off the stove. Removed all the burners and indicator lights and mounted them to the new glass. Reinstalled the glass top Hooked up all wires Reinstalled front panel. Read more
Fix F9 error codes, unresponsive controls, or temperature issues. This control board manages oven functions, timers, and display. Moderate DIY repair.
I replaced the sensor and oven control panel based on information I got on the Internet. The parts arrived on the second day and the service as usual was excellent. Read more
Secures the clear lens on your range's control panel. Replace if cracked, broken, or missing to keep the lens properly seated and prevent shifting or rattling.
Using the website, I looked at the schematics and guessed which parts I'd need. I chatted with an associate, who confirmed the requirements. He also sent a PDF on how to take the old parts off. I'm not mechanically inclined, but the effort went flawlessly. Thanks for the parts and help! Read more
Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.
Warming element not heating? This radiant element restores heat to your warming zone. DIY-friendly repair with basic tools in under an hour.
I watched a few videos on youtube to get some ideas as to what the problem may be. I pulled out the stove from the wall and DISCONNECTED THE POWER - thats very important. I took a picture of the burneer connections, so I would know how to reconnect the wires later. I removed the broken burner, and check visually for any broken areas in the coil. There were none visible. Next, using multimeter, I checked for continuity. The meter indicated that there was no continuity through the... Read more
Secures the small clear lens in your range's control panel opening. Replace if cracked, broken, or missing to restore a snug fit and proper appearance.
Right-side oven door hinge that pivots and supports the door for proper alignment. Replace when worn, damaged, or broken to restore smooth operation.
Tenants in rental unit explained problem, I ordered replacement hinges for both the left and right. After replacing both, it was determined that a cleaning person removed and didn't reinstall the bottom heat plate of oven back into position, which was the reason the door wasn't closing. Read more
6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.
I positioned the element under the top of the stove and placed it back in there with the bracket and screw. Turned out perfectly. Read more
This replacement mounting screw is used in cooking appliances to fasten components securely. It restores a tight, rattle-free fit so panels, brackets, or burner-related parts stay properly aligned during everyday use.
I did some research on my own and then spoke with the “Pros” at Appliance Parts Pros. Both confirmed the main board needed to be changed. The other less likely item was the oven sensor. I changed the sensor first as it was inexpensive. The error codes continued. Subsequently, I then changed the main board which was slightly difficult. When changing 2 screws hold the board in place on each front corner only. Also suggest you take a picture of wiring. I replaced wiring in place from old board to... Read more
If your oven won't heat, displays errors, or buttons don't respond, this electronic control board manages heating cycles and user interface functions.
This SPDT high-amp switch controls high-current circuits by switching one input between two outputs, restoring proper electrical control in affected appliance functions. Built for high-load switching where reliable on/off selection is required. What it does:
Oven was dead and I noticed the display would flicker upon opening the top oven door. Thanks to the awesome appliance parts diagram at this website, I realized that changing the switch would be a fairly simple and inexpensive gamble, before calling a repairman. Turns out that was all I needed, and this $6 part saved my $2,600 oven !! Read more
Mounting screw secures range components and panels. Replace if screw is stripped, missing, or damaged during appliance repair or maintenance work.
Went on line to the FAQ and ordered the 2 units suggested. The install was very easy and had the stove back online in 1/2 hour Read more