Pd364glbs/01 Parts

Restore reliable baking performance with this bake heating element. Mounted at the bottom of the oven, it provides the primary heat source in Bake mode so the cavity reaches and maintains the set temperature for consistent results. What it does:

• Heats the oven in Bake mode to reach and hold the set temperature
• Failure can cause no heat in bake, very slow preheating, or uneven/undercooked results
• Visible cracks, blisters, or a broken coil indicate the element should be replaced
• A shorted element may trip a household breaker or blow a fuse

• One bake heating element

• Disconnect power at the breaker and allow the oven to cool before servicing
• Remove oven racks; take out the element's mounting screws and gently pull the element forward to access wire terminals
• Transfer wires one at a time to the new element; do not allow wires to fall back into the insulation
• Reinstall the element and panels, restore power, and test bake operation

Replace a seized or corroded burner gas tube when igniters stop working or burners won't light. Delivers gas safely to surface burners. DIY repair.

Replacement selector knob for your range. Fits onto the control shaft to select functions, cycles, or heat levels. Needed when original is cracked, broken, or missing.

Stabilizing leveling foot for gas ranges. Provides balance and proper elevation. Replace if worn, broken, or missing to restore stability and positioning.

Fix overheating or loud fan noise in your gas range with this cooling fan motor. Protects electronics by circulating air to cool internal components.

This is a replacement appliance tube that routes water or air inside compatible Bosch appliances to maintain proper operation and prevent leaks. Durable plastic construction restores the original pathway for fluids or airflow. What it does:

• Replaces a worn, cracked, or damaged internal tube to stop leaks or seepage
• Restores proper routing of water or air so the appliance can operate as designed
• Helps eliminate symptoms like visible leaking, pooling, or unusual odors from trapped moisture
• Works as a direct-fit replacement where the original tube has failed or deteriorated

• One replacement tube

• Disconnect power and turn off the water supply before beginning any repairs
• Compare the new tube to the original for length, fittings, and orientation before installing
• Use proper clamps or retainers as required by the appliance; secure connections to prevent leaks

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

Oven light not working or flickering? This low-voltage transformer powers your range's interior lights. Restores proper oven lighting function.

Tube component for gas ranges. Installs in the burner assembly or manifold area. Replace if cracked, damaged, or leaking to restore proper operation.

Fix blank screens, unresponsive controls, or error codes with this display control interface. Restores visible feedback and menu settings for your cooktop.

Replace a worn, broken, or missing gas range control knob. Restores safe operation and improves appearance. Fits directly onto the control shaft.

This replacement tube routes water inside the appliance to restore proper flow and prevent leaks. It's a direct-fit service part when the original tube is cracked, split, or clogged and needs replacement. What it does:

• Channels water between internal components to maintain normal operation
• Restores proper water flow when the OEM tube is damaged or leaking
• Helps prevent water damage and interruption of appliance cycles caused by split or clogged tubing
• Compatible with the appliance's existing fittings and mounting points when used as a factory replacement

• One replacement tube as shown

• Recommended for users comfortable with basic appliance disassembly; follow manufacturer service manual for access steps
• Turn off power and shut off water supply before starting work
• Inspect clamps, seals and surrounding hoses while replacing; replace any worn fasteners or gaskets

Replace your cracked or faded control panel insert trim to restore appearance and proper button alignment. Fits into the control area for a clean look.

Secures internal components to the range frame. Replace if bracket is cracked, broken, bent, or missing to restore proper alignment and stability.

Fix a range door that won't stay open or closes too hard with this tension spring. Restores proper door balance and smooth operation. Simple DIY fix.

Control panel trim insert that covers and protects the console area. Replaces cracked, scratched, or cosmetically damaged trim for a clean, finished look.