Pdt750ssfss Parts

The Control Panel is an OEM part for GE dishwashers. It serves as the main interface for operating the dishwasher, housing the selection buttons and display screen. This panel allows users to choose wash cycles, set various options, and monitor the progress and status of the dishwasher.

Causes of a bad control panel can include electrical issues such as short circuits, exposure to moisture which can cause corrosion or damage, and physical wear and tear from regular use.  

Symptoms of a bad Control Panel include:

• Unresponsive or sticky buttons
• Display not lighting up or showing incorrect information
• Inability to select or change wash cycles
• Dishwasher starting and stopping unexpectedly or not starting at all

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silicone Light Pipe is an OEM part for GE dishwashers. It is designed to transmit light from the control panel to the user interface, ensuring the visibility of display indicators and controls.

Common causes of a bad light pipe include wear and tear over time, damage from excessive heat, or physical impacts that cause cracks or breaks.

Symptoms of a bad Silicone Light Pipe include:

• Dim or no illumination of the control panel indicators
• Uneven lighting across the control panel
• Difficulty in reading the display or control settings

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Detergent Module is an OEM replacement part for GE dishwashers. It plays a role in dispensing the appropriate amount of detergent into the wash tub at the right time during cycles.

Causes of a bad detergent module can be clogs or jams preventing proper detergent distribution, cracks or breaks in dispensing components, or faults in the electronic sensors controlling the dosage.

Symptoms of a bad detergent module include:

• Dishes or tubs with residual detergent buildup or lingering food soils
• Cycles failing to advance past the initial wash stages
• Cloudy or soapy water visible in the final rinse

This OEM GE part is also compatible with some Hotpoint, RCA, and select Kenmore dishwasher models.

This Fold Down Tine Indexer is an OEM part for GE dishwashers. It plays a crucial role in the flexibility and organization of the dishwasher's rack system. This indexer allows for the fold-down tines in the dishwasher rack to be adjusted or locked into place, providing customizable loading options for different sizes and types of dishes.

A malfunctioning indexer can limit the flexibility of the dishwasher rack, making it difficult to efficiently load various dishware.

Symptoms of a faulty Fold Down Tine Indexer include:

• Difficulty in adjusting or securing the fold-down tines in the dishwasher rack.
• Tines not staying in place, leading to inefficient dish loading.
• Breakage or visible wear of the indexer mechanism.
• Inability to accommodate different sizes or shapes of dishes effectively.
• Reduced overall efficiency in utilizing the space in the dishwasher rack.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The GE Service Machine Control is an OEM component for built-in dishwashers. As the central operating system, it oversees all wash and rinse functions including temperature regulation, spray arm rotation, and drainage.  

Symptoms of bad service control include:

• Failure to start or incomplete cycles  
• Inoperative buttons with no response
• Strange noises or vibrations during the operation
• Error codes displayed or repeating beeps

Causes can be normal component wear, moisture damage, or the effects of power outages over time degrading internal circuits. 

This Genuine OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore dishwashers for a factory-precision fit and reliable operation.

This 10-32 x 9/16 machine screw secures dishwasher components and panels. Replacing a missing or stripped fastener restores a tight fit, reduces vibration/rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, or internal assemblies using a 10-32 machine thread
• Replaces lost, corroded, or stripped screws
• Can help resolve looseness or rattling from a loose mounting point
• Correct 9/16-inch length helps maintain proper spacing and alignment

• Disconnect power at the breaker before servicing
• Use the appropriate driver for the screw head; start threads by hand to avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging mating parts
• Compare to the original fastener to matching thread and length

• Thread size: 10-32
• Length: 9/16 inch

This replacement upper spray arm assembly restores full wash coverage to the top of your dishwasher. It spins under water pressure, directing jets across the racks so dishes come out cleaner with fewer spots and leftover food.

• Distributes pressurized water through its jets to clean the upper section
• Replaces a spray arm that is cracked, warped, clogged, or not rotating freely
• Typical symptoms: poor cleaning on the top rack, residue left on dishes, or rattling from the arm striking items
• Restores even spray coverage when properly installed and unobstructed

• Disconnect power and water supply before servicing
• Release and remove the old upper arm (tab/clip/retainer varies by model); clear debris from the hub/feed area and transfer any reusable hardware
• Seat the new arm fully and confirm it spins freely before restoring service

The Middle Spray Arm Assembly is an OEM replacement part for GE dishwashers. It is responsible for distributing water and detergent during the wash cycle for thorough cleaning of your dishes. This part delivers a strong and consistent spray of water to effectively remove food particles and stains from your dishes.  

Symptoms of a faulty mid spray arm assembly include:

• Inadequate cleaning of dishes
• Visible food particles or residue after the wash cycle
• Reduced water pressure during the wash cycle

A bad mid spray arm assembly can occur due to wear and tear over time, clogging from debris or mineral deposits, or physical damage. If you notice poor cleaning results, reduced water pressure, or the spray arm not spinning properly, it may be time to replace the old or damaged mid spray arm assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This leveling leg adjusts the dishwasher's height at the base, helping you level and stabilize the unit inside the cabinet. Proper leveling reduces rocking and vibration and promotes a tight door seal and smooth rack operation.

• Screws into the base frame to set height and level the dishwasher
• Supports the unit to prevent rocking or wobbling
• Helps maintain door alignment and sealing; poor leveling can contribute to leaks
• A worn, bent, or missing leg can make leveling difficult and increase vibration/noise

• Disconnect power and shut off water; slide the dishwasher out if needed for access
• Turn the leg with a wrench or pliers to adjust height; replace by threading the new leg into the base
• Use a bubble level to set side-to-side and front-to-back level before re-securing the unit
• Do not overtighten; ensure both legs carry weight evenly on a solid floor surface

The LED control board is an OEM part for GE dishwashers featuring electronic touch controls. It includes the display screen assembly that provides a visual interface during cycles.

Causes of failure can include cracks or damaged connectors from repeated door opening/closing stresses. Moisture exposure can exacerbate typical wear over time.

Symptoms of a malfunctioning display assembly include:

• Glitchy or frozen statuses that don't update properly
• Dead pixels or full screen failure making input impossible
• Fault codes that cannot be cleared
• Improper diagnostic readings hampering repair

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Vent Filter is an OEM part for GE dishwashers. It helps to capture and filter out food particles, grease, and other debris. 

Causes of a bad vent filter can include clogging or blockage due to accumulated debris, wear and tear over time, or damage to the filter material.

Symptoms of a bad vent filter include:

• Lingering unpleasant odors during or after the dishwasher cycle
• Visible signs of debris or buildup on the filter surface
• Reduced effectiveness of the dishwasher's drying performance

Replace your worn-out or clogged vent filter with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This tub insulation is the replacement foam/fiber wrap that lines the dryer drum area to help retain heat, reduce exterior cabinet temperature, and dampen operation noise for more efficient, quieter drying. What it does:

• Wraps around the dryer drum/tub to help limit heat loss during cycles
• Helps reduce cabinet surface temperature for safer operation
• Dampens vibration and operating noise from the rotating drum
• Supports consistent drying performance by improving heat retention
• Useful when original insulation is damaged, torn, or missing

• Disconnect power (and gas supply for gas dryers) before servicing
• Access requires removing the dryer cabinet or drum per OEM instructions
• Handle carefully—use gloves and eye protection; avoid breathing any loose fibers
• Reinstall with original fasteners and seal as needed to maintain drum clearance

This dishwasher junction box cover encloses the power-connection compartment at the base of the unit. Replacing a damaged or missing cover helps protect wiring from debris and accidental contact, restoring a safe, secure connection area. What it does:

• Covers and secures the dishwasher's electrical junction box
• Helps shield wire splices from moisture, dust, and accidental contact
• Restores proper fit when the original cover is cracked, broken, or missing
• Useful if the junction box won't stay closed or the cover no longer secures properly

• Includes 1 junction box cover

• Disconnect power at the circuit breaker before servicing
• Remove the lower access/kick panel to reach the junction box
• Remove the old cover and screw, position the new cover, and secure with the existing hardware
• Ensure all wiring and the strain relief are fully inside the box before closing; restore power and test

This conduit seal fits the dishwasher's water-feed conduit connection, keeping wash water contained and pressure steady to the spray arms. Replacing a worn seal helps address leaks and maintain reliable cleaning performance.

• Seals the joint where the dishwasher's water feed conduit/tube connects within the wash system
• Helps prevent water leaks at the conduit connection point
• Maintains proper wash pressure for consistent spray performance
• Common signs of failure: drips beneath the unit, visible cracks/flattening, or a loose-fitting old seal

• Disconnect power and shut off the water supply before servicing
• Access the conduit connection (location varies by model), remove the old seal, and clean mating surfaces
• Lightly moisten the new seal to ease installation and seat it fully
• Reassemble and run a brief cycle to check for leaks

The Variable Speed Pump Kit is an OEM replacement part for GE dishwashers. It contains the wash impeller and circulating pump that work together to spray water and recirculate water-detergent mixtures throughout cycles. 

Causes of failure include wear and tear on bearings/seals, mineral buildup on impeller assemblies, or compromised motor functionality preventing proper water flow adjustment.

Symptoms of a bad variable speed pump kit include:

• Inadequate or inconsistent water pressure   
• Doused or unsaturated dishes  
• Inability to adjust water volume for efficiency
• Flood or overflow errors requiring maintenance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This wash pump has the hidden heater integrated into the pump.

This dishwasher turbidity sensor assembly monitors water clarity in the sump and reports to the control so it can adjust wash time and rinses for optimal cleaning. Replacing a failed sensor can restore normal cycle decisions and performance.

• Measures wash-water clarity (soil/turbidity) and sends data to the control
• Helps optimize cycle length, number of rinses, and water usage
• A faulty sensor may cause unusually long or short cycles
• Can contribute to poor cleaning or failure to complete a cycle
• May set a sensor-related code in diagnostics on some models

• Disconnect power at the breaker and shut off water before servicing
• Access from the bottom/front of the dishwasher; place a towel to catch residual water
• Unplug the wire connector, rotate the sensor to unlock, and remove; ensure the seal seats properly when installing the new part
• After installation, check for leaks and run a test cycle