Pdw1800nbb Parts

This connecting ring nut secures a threaded water-path connection inside the dishwasher, helping keep the joint tight and leak-resistant. Replace a cracked, stripped, or missing nut to restore a secure fit and reliable operation.

• Tightens and holds a mating connector, tube, or manifold in place
• Helps maintain a watertight connection when used with the proper seal
• Replaces worn or cross-threaded hardware that can cause leaks or loose joints
• Typical symptoms include dripping at the connection, a loose hose/manifold, or difficulty keeping the fitting tight

• Disconnect power and shut off the water supply before servicing
• Access the joint; start threads by hand to avoid cross-threading, then snug with the proper tool—do not overtighten
• Inspect any O-ring or gasket at the connection and replace if worn
• Restore water and check for leaks before reassembling panels

This sump gasket seals the dishwasher's sump to the tub to keep wash water contained. Replacing a worn or flattened gasket helps stop leaks and maintain proper wash and circulation performance.

• Creates a watertight seal between the sump/pump assembly and the tub bottom
• Helps prevent leaks onto the floor or into the base pan
• Maintains wash pressure and circulation by preventing air intrusion
• Replace if torn, cracked, deformed, or if water is leaking from the center/bottom of the unit

• Disconnect power and water before servicing; use gloves to protect from sharp edges
• Access the sump from inside the tub or underside (model dependent); remove spray arm/filter as needed and release the retaining ring or tabs
• Clean mating surfaces; install the new gasket evenly without twists and ensure proper orientation
• Reassemble and run a brief fill/wash to check for leaks before fully reinstalling

This upper rack rail cap replaces a worn or missing end cap that secures the dishwasher's upper rack to its rail, helping keep the rack aligned and preventing it from sliding off during loading and operation. What it does:

• Fits on the end of the upper rack rail to hold the rack assembly in place and keep it tracking smoothly.
• Helps prevent the upper rack from slipping off the rail or becoming misaligned during use.
• Replaces cracked, broken or lost end caps that expose the rail or allow the roller/track hardware to disengage.

• Always disconnect power to the appliance before beginning any repair.
• Pull out the upper rack to access the rail end; the cap typically snaps or pushes onto the rail end—apply firm, even pressure to seat it fully.
• Inspect adjacent rollers, retainers and the rail for damage while the rack is removed; replace any damaged parts to ensure proper function.

The Spray Arm Connector Assembly is an OEM replacement part for GE dishwashers. This assembly connects the upper and lower spray arms to the water inlet valve, allowing water to flow through the spray arms during the wash cycle. 

Symptoms of a bad spray arm connector assembly include: 

• Uneven or inconsistent water coverage on dishes
• Clogged or kinked spray arm assemblies 
• Leaks at the tub connections
• Reduced water pressure impact 

Causes of a bad spray arm connector assembly can be mineral buildup affecting water flow, cracked or damaged connectors, or wear over time.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Pressure switch that monitors water level and signals the washer control board when to start or stop filling. Replacing a failing pressure switch can help restore correct fill levels and normal cycle operation. What it does:

• Senses air pressure from the tub and tells the control when the correct water level is reached
• Stops the fill valve once the desired level is detected to prevent overfilling
• Can cause underfilling, overfilling, or failure to advance cycles when faulty
• Works with the washer's control system to ensure proper fill and cycle progression

• Disconnect power to the appliance before starting any repair
• Shut off water supply and relieve any trapped water before accessing components
• Carefully disconnect wiring harness and air tube; note routing for reassembly

This adjustable leveling leg replaces a worn or damaged support foot to stabilize and level the appliance, reducing rocking and helping ensure even operation. Easy to adjust for a secure, balanced fit under the appliance. What it does

• Provides a stable, adjustable support foot to level the appliance on uneven floors
• Helps stop rocking, vibration, and noise caused by an unbalanced appliance
• Restores correct appliance height for proper door/clearance alignment and drainage
• Compatible with standard screw-in mounting used on many GE laundry appliances

• One adjustable leveling leg

• Turn off and unplug the appliance and empty loads before adjusting or replacing legs
• Raise or tilt the appliance slightly using appropriate tools or a helper to access the mounting point
• Thread the leg in/out to adjust height, then confirm stability and even weight distribution on all legs
• If multiple legs are worn, replace all feet to maintain proper leveling and balance

This spring washer provides a tensioning/retaining function to keep fasteners and components secured under vibration and movement. It helps maintain proper assembly alignment and reduces the chance of parts working loose over time. What it does:

• Applies spring tension to fasteners to prevent loosening from vibration
• Helps keep assemblies aligned and components seated correctly
• Can reduce rattling, vibration noise, and intermittent contact caused by loose parts
• Restores proper clamping force when worn or damaged washers allow play

• One spring washer

• Disconnect power to the appliance before beginning any repair
• Use appropriate tools to remove fasteners and note component orientation
• Replace only with the exact part number to ensure correct fit and function

This door hinge pin is the pivot that allows a dishwasher door hinge to open and close smoothly. Replacing a worn or missing pin restores aligned, controlled door movement and proper latching performance.

• Provides the hinge's pivot point between the hinge arm and the cabinet/frame
• Helps maintain proper door alignment for smooth opening and closing
• Wear or damage may cause squeaking/clicking, binding or uneven motion, door dropping too quickly, or difficulty latching
• Restores correct hinge operation when an original pin is bent, worn, or missing

• Disconnect power at the breaker and turn off water before servicing
• Support the door and relieve hinge spring tension; remove the toe-kick/access panel to reach the hinge area
• Remove the old pin and install the new pin through the aligned hinge holes; ensure it is fully seated
• Test door movement and latching before reassembling and restoring power

This sump clamping nut secures the washer/dishwasher sump seal and housing, helping keep the sump assembly sealed and stable during operation. It's a small but essential fastener for preventing leaks and maintaining proper drainage. What it does:

• Holds the sump/tub seal and sump housing tightly in place to maintain a watertight connection
• Prevents the sump assembly from loosening during spin or wash cycles
• Helps reduce leaks and related water damage when installed correctly
• Works with the factory sump and seal components as the retaining nut

• Replace only with the matching part number; verify orientation before tightening
• Hand-start threads to avoid cross-threading, then tighten to factory spec (do not overtighten)
• Disconnect power and water to the appliance before servicing

This sump drain hose carries wastewater from the washer tub to the drain pump, preventing leaks and keeping your laundry cycle draining properly. It replaces worn or cracked hoses to restore reliable draining. What it does:

• Routes water from the washer sump to the drain pump so the machine can pump out used wash water
• Stops leaks caused by splits, cracks, or collapsed hose sections
• Helps prevent standing water and incomplete drain cycles
• Works with the washer's pump assembly to maintain proper water flow

• Disconnect power and water before starting any repair
• Remove the cabinet or access panel only as needed for safe access to the sump area
• Ensure hose connections are seated and clamp(s) tightened to prevent leaks; do not overtighten
• Inspect adjoining seals and the pump inlet for damage while replacing the hose

This guide rail replaces a worn or damaged rack support to restore smooth, stable sliding of an appliance rack or drawer. It keeps the rack aligned so items slide in and out without catching or tipping. What it does:

• Supports and guides a sliding oven/drawer rack so it moves smoothly along its path
• Restores alignment to prevent racks from tilting, binding, or falling forward
• Reduces scraping, sticking, or grinding noises caused by damaged rails
• Helps maintain safe, even loading and unloading of cookware or stored items

• Disconnect power at the breaker and allow the appliance to cool before starting
• Basic hand tools are typically required; follow the appliance's service manual for access steps
• Remove the rack and any obstructing panels to access mounting screws or clips