Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Size: 10-32 GXTT FLP.595 S
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Secures hoses to fittings for leak-free operation. Replace when worn or corroded to stop drips on fill, drain, or circulation lines. Confirm fit.
Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.
Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more
Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.
Ordered new GE part through AppliancePartsPros.com. Looked on Youtube for some assistance in how to replace part. This entailed removed outer door cover and removing old touch pad strip. We were surprised how easy this was to do! Time involved less than 20 minutes! Works perfect now. This is an A+ company to order parts from, and their website is so easy to navigate. I ordered the part and it was at my doorstep in two days, packaged extremely secure to protect the genuine GE part. I... Read more
The GE screw is an OEM replacement part responsible for securing various components and parts of the dishwasher together. The screw is designed to provide a tight and secure connection for different panels, brackets, or other elements within the dishwasher. It plays a crucial role in maintaining the structural integrity of the appliance by preventing loose parts.
Common causes of a bad screw can include regular wear and tear from frequent use, exposure to moisture leading to corrosion, or damage from over-tightening. A compromised screw can result in loose or unstable components, which can affect the dishwasher's performance and safety.
Symptoms of a bad screw include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more
Kit contains 2 brackets and 4 screws. Used for granite and corning
The parts fits perfectly! I side mounted the brackets to the washer tub and then drilled into my cabinets for a tight perfect fit! My dishwasher is no longer falling forward when the drawer is out to load dishes. The best part was the chat! I found and ordered the part on chat. How easy was that?????? Read more
Seals the sump to maintain water pressure and spray effectiveness. Replace if you notice weak spray, poor cleaning, or leaks. Confirm fit with your model.
Although that this is a 10 yrs old appliance, I decided to repair it as it is part of the entire set in the kitchen. I used the tips on the videos at AppliancePartsPros site and was easy to replace the parts and fix. Only the Inlet sump was leaking, but I decided to replace all parts that are made with similar material to avoid further problems. I was a good decision as the pump suction tube was showing signs of start leaking. I would suggest AppliancePartsPros make that kind of suggestion... Read more
Secures dishwasher hoses to fittings and prevents leaks. Replace if corroded, rusted, or loose to restore a watertight seal. Confirm fit with your model.
Changed the water inlet valve for the water problem. To fix the problem of washer running while door was open, took off the front panel and changed the plunger sw interlock and spring which fixed the problem of washer running while door was opened mid wash cycle. Changed the clamp to the discharge hose as it had rusted.Changed keeper latch assembly as it had cracks on the plastic. Read more
Covers the electrical junction box where the power cord enters your dishwasher. Replace if cracked, broken, or missing to protect wiring connections.
Used your parts. Worked great. Read more
Grinding noise during drying cycle? This vent door actuator opens and closes the dishwasher vent for proper airflow. Easy DIY fix, one screw install.
I ordered and replaced the 2 possible items that I believed could be the cause. Unit now operates correctly. Read more
Fix dishwasher cycles not running or dishes not drying. This control board manages cycle selection, timers, and heating element operation.
Replaced Module Control Read more
Size: 10-16 ab.
Ordered the necessary parts to fix it Read more
Thread-forming screw secures dishwasher panels, brackets, and trim components. Replace missing or stripped fasteners to restore proper mounting.
Secures hose connections to prevent leaks in your dishwasher. Replace if water pools under the unit or connections feel loose. Confirm fit with your model.
Pulled the dishwasher out - determined what parts were needed- ordered on your site and when the parts came in made the fix to the dishwasher. It was easy to do and less than $60.00 for the parts sure beats over $800.00 for a comparable replacement dishwasher. Read more
This dishwasher screw secures internal components and panels within your dishwasher's assembly. It provides proper fastening for pumps, motors, and housing components that keep the unit operating smoothly. Replace this screw if internal parts are loose, vibrating excessively, or if the original screw is damaged or missing.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.