Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The GE latch handle is an OEM replacement part responsible for allowing the opening and closing of the dishwasher door. Located on the inner door panel, this part ensures that the dishwasher door latches securely when the machine is in operation, preventing any leaks or disruptions in the cleaning process. Additionally, it provides a convenient means for users to open and close the dishwasher, allowing easy access to load and unload dishes. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. This part fixes the following symptoms
I bought spare part from AppliancePartsPros.com and followed the instructional video. It was easy and saved a few bucks. Read more
Ordered parts, waited for them to arrive Took door apart, installed new parts Put door back together shut door (it stayed shut) Washed dishes, opened door (it opened) Dishes were clean (no water on floor) ALL DONE AND IT WORKS Read more
Unscrew the sides and pull the dishwasher out and simple remove the old door hinges and put the new one in. Read more
This was not an obvious source of a leak. The Tower Heater Assembly Nut developed a crack over time due to heat exposure. So the leak was gradual slowly getting worse over time. It was a hairline crack that ran down one of the edges of the nut making it hard to see. In talking to a pro he said it isn't a common problem. It is all the way in the back of the bottom of the dishwasher so it is not something you can see without pulling the dishwasher out and running it. The repair itself is easy. I... Read more
Seals the lower edge of your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or causing water on the floor.
The repair was super simple. Just slide out the old seal and slide in the new. The INTERESTING part was getting access to the seal at the bottom of the door. Just remove the front of the door -- unscrew eight screws around the edge. Try to pull off the door front. Finally locate two hidden screws underneath the two bottom corners. After several tries, find that the screws require a wrench to loosen. I pull off the door front, making only a few scratches, some on my hand, then try to pry up... Read more
The Fine Filter Hub Nut is an OEM part for GE dishwashers. It secures the fine filter in place, ensuring that debris and food particles are effectively filtered out during the wash cycle, preventing them from re-entering the dishwasher tub.
Causes of a bad fine filter hub nut can include wear and tear from regular use, damage from over-tightening, or cracking due to impact. A faulty hub nut can lead to improper filtration, causing debris to circulate and potentially clog the dishwasher.
Symptoms of a bad Fine Filter Hub Nut include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.
Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.
Symptoms of a bad Upper Spray Arm Bearing include:
The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.
Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.
Symptoms of a bad flood switch assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
Color: blue-gray. It measures about 1-1/2 inches in diameter.
Ordered new part on website which arrived within two days - amazing !!! Truly thought we would be waiting for several weeks for replacement - awesome !!! Read more
Dishwasher rack tine clip used to hold the adjustable tines in place. Color: light gray. Measures about 1-1/2 inches wide by 1 inch deep.
Replaced retainer clips. Read more
Dishwasher overflowing or leaking from the door? A faulty float can cause overfill issues. This float controls water level and prevents flooding.
Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more
Scr 8-16 b hxw 1.08 ss
I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more
I found the manufacturers parts drawing and purchased the parts that were needed.The previous home owner had not only removed from he parts but he had also reversed the direction of the dish rack. The only way I was able to repair it was to figure out how it must function,the rest was easy. Read more
Went on the internet, located the part on your website and ordered 2 items. Read more