Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Pdw7880gooss Parts

Dome Float (Water-Level Float)
Genuine Ge part
By: Ge
Part Number: WD12X10051

This dome float is the replacement water-level float that helps the appliance sense and control the tub's water level, restoring reliable fill and shutoff behavior. Use this OEM-fit float when the original is cracked, stuck, or missing. What it does:

  • Moves with rising and falling water to actuate the water-level mechanism and help prevent overfilling.
  • Can reduce symptoms such as improper fill levels, continuous filling, or intermittent fill shutoff when the existing float is damaged or obstructed.
  • Works as part of the washer's water sensing system—does not include electronic switches or housings unless shown.
What's included: One dome float (single replacement float). Install notes:
  • Disconnect power and unplug the appliance before starting any repair.
  • Access may require removing the washer top or cabinet; follow your model's service instructions.
  • Inspect surrounding hoses and clips; replace any damaged components and ensure the float moves freely.

More
$6.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WD2X5166

Size: 10-16 ab.

Do-It-Yourself Stories from Customers like You The shaft seal was leaking when dishwasher emptied   Joe V. • Medford , NY • February 07, 2016

Ordered the necessary parts to fix it Read more

More
$15.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Harness Clip
Genuine Ge part
By: Ge
Part Number: WD01X10110

Secure wire harnesses in your dishwasher with this harness clip. Replace if wires are loose or clip is broken. Verify fit with your model number.

More
$6.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Hex Head Mounting Screw
Genuine Ge part
By: Ge
Part Number: WD02X10141

Replacement hex head screw for dishwasher component mounting. Secures solenoids, valves, and internal parts. Order when original is rusted, stripped, or missing.

Do-It-Yourself Stories from Customers like You The drain solenoid on dishwasher leaked and rusted where wouldn't work   Webster M. • Memphis , TN • September 19, 2014

Ordered complete solenoid kit, valve seal, and sol mounting screws. Watched repair video and it works great. Read more

More
$9.24

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Vent Flapper
Genuine Ge part
By: Ge
Part Number: WD12X10044

This is a small flapper valve located in the dishwasher vent assembly that opens to release steam and hot air during the drying cycle. It closes during wash cycles to prevent water from escaping. Replace this flapper if dishes are not drying properly, if you notice steam leaking during the wash cycle, or if the flapper is warped, cracked, or stuck.

More
$11.09

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Dishrack Finger Indexer
Genuine Ge part
By: Ge
Part Number: WD12X10062

Dishwasher dishrack finger indexer snaps onto the rack to help guide and position dishes during the wash cycle. Replace if broken, cracked, or missing.

More
$10.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Mounting Screw
Genuine Ge part
By: Ge
Part Number: WD1X550

Replacement mounting screw for dishwashers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

More
$12.35

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Toekick Panel Assembly
Genuine Ge part
By: Ge
Part Number: WD27X10087

Replace your dishwasher's toekick panel assembly. This decorative base panel installs at the bottom front to conceal the leveling legs and floor gap. Order if cracked, dented, or missing.

More
$234.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Stemware Gripper Clip
Genuine Ge part
By: Ge
Part Number: WD28X10013

Secures stemware in your dishwasher rack to prevent glasses from tipping or shifting. Replace this clip if worn, broken, or missing for safe washing.

More
$6.68

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Comb Upper Rack Asm
Genuine Ge part
By: Ge
Part Number: WD28X10060

 

More
$13.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Mounting Screw
Genuine Ge part
By: Ge
Part Number: WD2X248

Replacement mounting screw for dishwashers and electric ranges. Secures panels, covers, and internal components. Order when original is missing or stripped.

More
$9.24

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw 8 - 18X7/8
Genuine Ge part
By: Ge
Part Number: WD2X322

Size: 8-18 x 7/8 inch.

More
$11.09

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Front Sound Dampening Insulation Panel
Genuine Ge part
By: Ge
Part Number: WD01X10113

Front insulation panel that dampens sound and reduces heat transfer in your dishwasher. Replace if torn, compressed, missing, or water-damaged.

More
$26.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Dishwasher Lower Door Gasket
Genuine Ge part
By: Ge
Part Number: WD08X10075

Seals the lower edge of your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or causing water on the floor.

Do-It-Yourself Stories from Customers like You The bottom door seal on my ge profile dishwasher needed to be replaced since its sealing edge had deteriorated (it was installed in 2006 )   James R. • Southport , NC • September 05, 2015

The repair was super simple. Just slide out the old seal and slide in the new. The INTERESTING part was getting access to the seal at the bottom of the door. Just remove the front of the door -- unscrew eight screws around the edge. Try to pull off the door front. Finally locate two hidden screws underneath the two bottom corners. After several tries, find that the screws require a wrench to loosen. I pull off the door front, making only a few scratches, some on my hand, then try to pry up... Read more

More
Best Seller
Fine Filter Hub Nut
Genuine Ge part
By: Ge
Part Number: WD12X10061

The Fine Filter Hub Nut is an OEM part for GE dishwashers. It secures the fine filter in place, ensuring that debris and food particles are effectively filtered out during the wash cycle, preventing them from re-entering the dishwasher tub.

Causes of a bad fine filter hub nut can include wear and tear from regular use, damage from over-tightening, or cracking due to impact. A faulty hub nut can lead to improper filtration, causing debris to circulate and potentially clog the dishwasher.

Symptoms of a bad Fine Filter Hub Nut include:

  • Poor cleaning results with food particles left on dishes
  • Unusual noises during the wash cycle
  • The filter becoming loose or not staying in place

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
Best Seller
Upper Arm Spray Assembly
Genuine Ge part
By: Ge
Part Number: WD22X10084

 The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.

You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.

Symptoms of a bad upper arm spray assembly include:

  • Poor cleaning performance, with dishes coming out dirty
  • Uneven water distribution inside the dishwasher
  • Visible cracks or blockages in the spray arm
  • Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dishwasher was all gunned up with hard water residue and detergent residue   Charles B. • Great Mills , MD • March 14, 2015

I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google