Pfsf6pkxeww Parts

Black French door mullion trim assembly that restores the exterior appearance and sealing of your refrigerator. Replaces cracked, broken, or missing trim.

This wheel axle secures a small drawer, bin, or shelf wheel to its rail or bracket in compatible refrigerators, helping restore smooth gliding and proper alignment when the original axle is worn, cracked, or missing.

• Holds the wheel in place so drawers/bins roll smoothly along their tracks
• Helps maintain alignment and prevents wobble or binding
• Replace if the axle is broken, loose, or the wheel repeatedly falls off
• Symptoms can include stiff or uneven drawer movement, scraping, or a missing wheel/axle

• Unplug the refrigerator and remove food from the affected drawer/bin
• Remove the drawer/shelf to access the wheel and axle
• Use needle-nose pliers to release and remove the damaged axle; align components and press the new axle fully into place
• Inspect the wheel and track; replace any worn parts to ensure smooth operation

Self-tapping screw fastens appliance panels, brackets, and trim by cutting its own thread. Replace missing, stripped, or broken screws during repairs.

Refrigerator clicking but not cooling? A failed compressor overload protector prevents the compressor from starting. This part restores normal operation.

Support roller for refrigerator crisper or vegetable drawer. Installs on drawer track to enable smooth sliding. Replace when cracked, broken, or worn.

Right-side drawer slide rail for refrigerators. Provides smooth sliding track for pull-out drawers. Replace if cracked, broken, or causing drawers to jam.

Retaining spring secures the fan blade to the motor shaft in your refrigerator. Replace if spring is broken, missing, or loses tension.

This is a small axle pin or rivet that supports a caster or roller wheel on the refrigerator. It allows components such as drawer slides or leveling wheels to roll smoothly. Replace this axle if a wheel wobbles, falls off, or no longer spins freely, causing drawers to stick or the refrigerator to be difficult to move or level.

Support roller for refrigerator pantry drawers. Installs underneath drawer to enable smooth gliding. Replace if cracked, worn, or causing drawer misalignment.

Secures temperature sensor in place for accurate readings. Replace if loose, cracked, or sensor reads incorrectly. Confirm fit with your model number.

Freezer door handle assembly that installs on the exterior door panel. Replacement needed when the original handle is cracked, broken, loose, or missing.

Seals the ice chute cap to prevent spills and moisture intrusion. Replace if ice escapes, moisture forms, or seal feels loose. Confirm fit with model.

Lower-left rail slide assembly that supports and guides refrigerator drawers. Replace when broken, cracked, or worn to restore smooth gliding and proper alignment.

Refrigerator not cooling? This sealed compressor circulates refrigerant to restore proper temperature control. Professional installation recommended.

A small metal C-shaped retaining clip that secures shafts, pins or components in place to prevent unwanted movement. Simple, durable hardware that restores proper fit and alignment for the part it secures. What it does:

• Holds shafts, pins or rods in position to prevent axial movement or disengagement
• Restores secure attachment where a worn or missing clip allows parts to shift or fall out
• Used in moving assemblies to maintain alignment and proper function
• Fits in a groove or slot and provides spring tension for a tight hold

• One C-clip (retaining clip)

• Inspect the mating groove/pin for burrs or damage before installing the clip
• Use appropriate snap-ring or pliers to compress/expand the clip as needed; wear eye protection
• Ensure the clip fully seats in its groove and that the retained component moves as intended

This magnet assembly replaces the magnetic strip that helps the refrigerator door seal stay tight, improving door closure and helping the appliance maintain proper temperature and efficiency. What it does:

• Replaces the magnetic sealing strip in the door gasket to help the door stay closed
• Restores a strong door seal to reduce cold air loss and limit frost buildup
• Helps prevent warm-air leaks that can cause the compressor to run more often
• Addresses symptoms such as a door that won't fully latch, visible gaps at the seal, or excessive frost in the freezer

• Disconnect power to the appliance before beginning any work
• Remove door trim or gasket; the magnet may snap or slide into a channel or require adhesive
• Handle the gasket and magnet carefully to avoid tearing or misalignment; ensure the magnet sits evenly along the door edge