Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is a temperature sensor assembly designed for the upper oven cavity. It monitors the internal oven temperature and sends readings to the control board so the oven can regulate heat accurately. Replace this sensor if your oven is not heating to the correct temperature, overcooking or undercooking food, or displaying an error code related to temperature sensing.
Replaced the temperature sensor Read more
Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.
I wasn't sure if it was the valve or the switch that was broken so I ordered both parts so I would be assured of being able to fix the range the same day I took it apart. It was a much bigger pain getting to the valves than I imagined but I did get it done. Turns out the two tiny screws holding the v@lve together wer backing themselves out and the stem was very loose. I'm surprised it wasn't leaking gas. Anyways I replaced the valve for good measure ev|n though tightening the two screws... Read more
Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.
Removed old, installed new. Read more
The KNOB ASSEMBLY is an OEM component specifically designed for GE gas ranges. It provides dual interfaces for operating individual burners through an integrated control knob and push button mechanism.
Symptoms of a bad knob assembly include:
Continuous high-heat cooking exposure can degrade the integrity of the assembly over time. Accidental impacts introduce a risk of cracked housings as well. Replacing it with this genuine GE part restores assured burner commands through an appearance-retaining operation.
This OEM GE replacement knob assembly is also compatible with some Kenmore and RCA gas cooktop models. Reliable indication and controls maximize usability cycle after cycle.
Ordered new knobs. Read more
Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.
Attached new leg and leveled the range. Read more
Replacement grate assembly for gas range stovetops. Provides stable cooking surface over burners. Order if your existing grate is cracked, broken, or worn.
Easy Fix Put In Item number & Was Referenced The Ones That Was Possible Fit For Stove! Read more
Replacement center burner grate for gas ranges. Restores a stable cooking surface over the middle burner when the original is cracked, worn, or missing.
Wow what can I say. Customer service fantastic. Easy of ordering fantastic. Speed of delivery outstanding. Overall I highly recommend. Read more
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
The Valve and Burner Assembly is an OEM part for GE gas ranges. As the primary mechanism for fuel ignition and burner operation, it works to deliver gas to each burner safely and control flame intensity precisely.
Symptoms of a bad valve and burner assembly include:
Causes can be normal damage over time from heat exposure, cracks developing in valve components, blockages in gas ports, or loose connections. Installing this OEM replacement ensures your range's burners operate efficiently.
This GE part is also compatible with some Hotpoint, RCA, and Kenmore ranges and restores reliable stove-top cooking performance. Replace yours today before minor problems worsen.
Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.
I bought a new orifice and installed it. Read more
Safety bracket that anchors your range to the floor or wall, preventing tip-over. Replace if missing, damaged, or cracked to secure the appliance.
Replaced the water filter head. Read more
This is a genuine OEM replacement nut that is used on convection oven fans. This nut holds the fan onto the spindle. If the nut becomes lost during repairs to the fan, it will need to be replaced before the fan will work. This nut locks the fan to the spindle to turn and move the air around inside the oven. The fan helps the food to cook more evenly and reduces areas in the oven that are not cool enough or hot enough. If the fan is not working, the convection oven will not cook correctly.Convection ovens are different from regular ovens, and the fan is part of the reason. Convection ovens use the fan and an exhaust system to move the heat around inside the oven to cook food more evenly and faster. Many convection ovens have a setting that allows the oven to be used as a regular oven. If the nut is missing and the fan is inoperable, the oven can be used for regular cooking if it has this feature. Otherwise, the convection oven should not be used until the nut is replaced.This nut is a silver metal replacement part that is sold individually. It is designed for use in convection ovens made by GE and Kenmore.
I took the cover off and the fan had separated from the bushing. Ordered a new fan and nut and it took all of 5 minutes to replace. Probably saved $159.99 service call repair and that is with a coupon. Any one can do this repair, just make sure the oven is cold as you will come in contact with metal parts. Read more
Oven won't heat or takes forever to ignite? This gas range igniter glows to light burners. Common fix for inconsistent ignition. DIY replacement part.
Ordered the part from you and watched a YouTube video on how to make the repair on a similar oven. Read more
Flat wire shelf that slides into your oven's side supports to hold bakeware at the correct height. Replace if bent, warped, or missing a rack position.
Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.
My only option to get the natural gas orifices was to buy the tubing with it. This was easy; I simply switched out the lp orifices with the natural gas using a socket. However, I still found one burner not lighting. I came to find out by looking underneath the top that the tubing was broken. So I lucked out on needing the tube holder for that burner. But I will mention, it would still be nice if I could have found the natural gas orifices sold separately. No one sells these separately from the... Read more
If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.