Pgs688semss Parts

This 90° elbow assembly connects a refrigerator's water line to the fill/ice system, routing water where the appliance needs it and helping maintain a secure, leak-resistant connection. Designed to replace a damaged or worn elbow to restore proper water flow. What it does

• Redirects water flow at a 90° angle for tight installations and proper tubing routing
• Provides a sealed connection between water tubing and the appliance inlet to prevent leaks
• Commonly used where a bent, cracked, or blocked elbow causes reduced or no water to the ice maker or dispenser
• Helps stop intermittent leaking caused by a split or damaged elbow fitting

• One 90° elbow assembly

• Shut off water supply and unplug the appliance before beginning work
• Inspect tubing and seals; replace any worn tubing or O-rings to ensure a proper seal
• Hand-start fittings to avoid cross-threading, then snug per manufacturer guidance

The Central Grate is an OEM part for GE ranges. It is a multi-functional component located in the center of the range, separating the oven and stovetop burners. The central grate distributes heat evenly throughout the appliance and prevents spills, debris, or accidental heat damage to the components below. 

Causes of a bad central grate can include warping, cracks, or other damage due to high heat exposure over time. Signs of a worn grate include difficulty removing or sliding the grate from its tracks, excessive wiggling or movement during use, or gaps that allow particles to fall through.

Symptoms of a bad central grate include:

• Uneven cooking temperatures from the oven or burners 
• Reduced effectiveness of oven or burner functions
• Risk of objects or liquids falling into dangerous areas below
• Discolored, rusted, or warped appearance 

It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Back

This oven door insulation panel fits behind the oven door to help retain cooking heat and reduce heat transfer to the outer door. It restores proper thermal performance for safer, more consistent cooking. What it does:

• Provides a thermal barrier behind the oven door to help keep heat inside the oven cavity
• Helps the oven reach and hold set temperatures more consistently
• Reduces excessive heat on the exterior door surface
• Replace if insulation is torn, missing, or visibly degraded

• Disconnect power to the appliance before beginning any service
• Follow the oven/door removal and reassembly steps from the manufacturer's service manual
• Wear gloves and eye protection; insulation may have fibrous material
• Avoid compressing or folding the insulation during installation; ensure it is positioned as originally installed

Left hand side

This is a replacement drawer panel that restores the front face and appearance of your appliance drawer. Replaces a cracked, dented or worn front surface so the drawer looks and functions as intended. What it does:

• Replaces a damaged, dented or cracked drawer front for improved appearance
• Provides the finished exterior surface that the drawer slides and handle attach to
• Helps keep the drawer aligned and closing smoothly when installed correctly
• Restores original fit and finish without replacing the entire drawer assembly

• Disconnect power to the appliance before beginning work and remove stored items from the drawer.
• Installation typically requires removal of trim/fasteners and careful alignment of clips or screws—use basic hand tools.
• Handle any sharp edges carefully and avoid overtightening fasteners to prevent cracking.

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Thin adhesive-backed foam tape that seals and cushions refrigerator components to reduce air leaks, vibration and moisture intrusion. Helps maintain consistent cooling and prevents drafts or frost buildup around panels and trim. What it does

• Creates a tight seal between cabinet parts, reducing cold-air loss and helping prevent frost or ice buildup.
• Cushions panels and trim to reduce rattles and vibration noise.
• Fills small gaps and evens contact surfaces for better insulation performance.
• Adheres to clean, dry surfaces for a long-lasting seal.

• Clean and dry the mounting surface thoroughly before applying; remove old adhesive residue.
• Measure and trim the tape to fit; press firmly along the length to ensure full contact.
• Replace only with the exact part if original fit or thickness is required.
• Handle adhesive with care; avoid contact with skin and keep away from high-heat areas.

This vertical vent duct directs internal airflow inside the cabinet to help maintain consistent temperatures and proper circulation. It replaces a cracked, warped or missing duct to restore designed airflow paths and reduce uneven cooling. What it does:

• Channels cold air between compartments to support even cooling and freezing
• Prevents air leaks that can cause warm spots or extra run time
• Helps maintain proper defrost and frost patterns when installed correctly
• Reduces noise from rattling or vibrating panels if damaged ducts are secured

• Disconnect power to the appliance before starting any repair
• Remove shelves, panels or evaporator cover as needed to access the old duct
• Inspect adjacent seals and fasteners; replace damaged clips or gaskets for best fit
• Reassemble panels securely and test operation; for model-specific instructions