Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
I ordered a clip retainer which hold the compressor in place. First, I discovered there are four clips and the one which I could easily move or turn by hand I ordered a replacement. The part came fast. In less than two minutes I had completed the repair. Read more
Very simple install. Read more
I ordered the 2 parts which were genuine GE parts and much less expensive than ordering directly from GE. All I had to do was remove the old parts and pop the new ones into place! All of 5 minutes. Read more
Seals the fresh food compartment inlet to maintain temperature and prevent air leaks. Replace if torn, cracked, or causing cooling issues. Verify fit with your refrigerator model number before ordering.
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect... Read more
Since the compressor was still working, I guessed that either the interior fan was bad or the main control board. Since fans are usually very reliable, I decided to replaced the main control board. Immediately after replacing the board, the refrigerator began working normally. Thank goodness that solved the problem because replacing the board is much easier that replacing the fan on my refrigerator. Read more
Replaced the transformer and a fuse. Appliance repair quoted $750, such a crime. Read more
I tested the LED light first with a meter and determined no voltage and did some searching online and found that there was a transformer that powers the light. I located the part and had too remove two other parts to get to the transformer. I again tested the transformer with a meter to determine there was no output voltage. I ordered the part and waited. Once it new part got in I plugged it in and confirmed the light now worked however, I noticed the new part had a slightly different metal... Read more
Color: white. Measures about 15 inches wide by 4-1/2 inches high by 9 inches deep.
I ordered a new one.. phone rep was very nice and mad e sure I was ordering the right part. Read more