Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Plry1778es5 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Ice Door Center
Genuine Frigidaire part
By: Frigidaire
Part Number: 241688501

The Ice Door Center is an OEM part for Frigidaire refrigerators. This component is part of the ice dispenser system, managing the release of ice through the dispenser chute. It helps prevent cold air from escaping the freezer, maintaining energy efficiency and preserving the ice supply.

You should replace the ice door center if it becomes damaged or fails to seal properly. Causes of a bad ice door center can include regular wear and tear, damage from repeated use, or build-up of ice and debris obstructing its movement.

Symptoms of a bad ice door center include:

  • Ice dispenser not working correctly
  • Ice build-up around the dispenser area
  • Warm air entering the freezer, causing ice to melt or clump
  • Increased energy consumption due to poor sealing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Ice maker door not sealing causing frost buildup and leaking   Richard B. • Shoreline , WA • October 11, 2016

I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more

More
$42.95
Compare At:
$51.11
You Save:
$8.16

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Drive Blade
Genuine Frigidaire part
By: Frigidaire
Part Number: 241684503

The Drive Blade is an OEM part for Frigidaire refrigerators. This component is crucial for the ice maker, as it helps to crush and dispense ice properly. The drive blade ensures that ice cubes are broken down to the desired size and pushed through the dispenser efficiently.

Over time, the drive blade can wear out or become damaged due to repeated use, ice buildup, or mechanical stress. Replacing a faulty drive blade is necessary to maintain the ice maker's functionality and ensure a continuous supply of ice.

Symptoms of a bad drive blade include:

  • The ice maker not dispensing ice properly
  • Unusual noises coming from the ice maker
  • Ice cubes being dispensed in irregular sizes or not at all
  • Visible damage or wear on the blade

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Ice dispenser no longer worked properly   Alan H. • Birmingham , AL • June 14, 2015

Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Light Socket
Genuine Frigidaire part
By: Frigidaire
Part Number: 218906802

The Light Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding the light bulb in place and providing the electrical connection needed to illuminate the refrigerator's interior. This ensures visibility inside the refrigerator, helping you easily find and access your stored food items.

Causes of a bad light socket can include electrical malfunctions, wear and tear over time, or damage due to bulb replacements or impact.

Symptoms of a bad light socket include:

  • The refrigerator light not turning on
  • Flickering or dim light
  • Visible damage to the socket
  • Electrical sparking or unusual noises when the light is on

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You Refrigerator light stopped working   Ed O. • Rapid City , SD • March 01, 2015

Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works. Appreciated the videos, ease in ordering and quick delivery. Read more

More
$25.95
Compare At:
$31.14
You Save:
$5.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Heater - Defrost
Genuine Frigidaire part
By: Frigidaire
Part Number: 216730700

The Defrost Heater is an OEM part for Frigidaire refrigerators, playing a critical role in the appliance's defrost system. This component is designed to melt away frost and ice that accumulate on the evaporator coils, ensuring that air can flow freely and the appliance maintains optimal cooling efficiency.

Causes of failure might include a burnt-out heating element, damage to the heater's electrical connections, or a malfunction in the control system that fails to activate the heater during the defrost cycle. 

Symptoms of a bad Defrost Heater include:

  • Frost build-up on the evaporator coils, leading to reduced cooling efficiency.
  • The freezer or refrigerator compartment is too warm.
  • The appliance is constantly running in an attempt to maintain the set temperature.
  • Pools of water or ice on the floor of the freezer compartment due to incomplete defrosting.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You The temperature control (inside freezer) was bad   Robert C. • Jay , OK • September 19, 2014

I replaced it with the Mfg. parts bought from AppliancePartsPros.com. The job went very smoothly, I received the parts a day and one-half after ordering them from your website. I am an HVAC contractor and was so pleased with your service that I'll use you again and again. Read more

More
$80.27
Compare At:
$95.52
You Save:
$15.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Lower Crisper Pan Cover
Genuine Frigidaire part
By: Frigidaire
Part Number: 240354602

The Lower Crisper Pan Cover is an OEM replacement part for Frigidaire refrigerators. It provides a protective barrier that covers the lower crisper storage pan. 

Symptoms of a bad crisper pan cover include:

  • Cracks, holes, or discoloration of the plastic material
  • Improper fitment that does not fully cover the crisper pan

Causes of a bad crisper pan cover can be prolonged use leading to wear and tear of the plastic over time. Accidental damage from cleaning chemicals or physical impact could also degrade its protective function.

Note: This cover does not include glass. Some models did not use the glass but if preferred, you can order part# 240350614

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You 4 year old fridge our landlord paid too much for wasn't cooling.   Robert W. • Royse City , TX • June 02, 2020

Gotta love the inter-webs and youtube.com I did a couple of searches and some troubleshooting. Everything pointed to the damper assembly and thermo so I ordered them as well as the new versions of the flimsy plastic drawer shelves, while I was working out of state during COVID. I had the parts waiting for me at the house. Rolled in Sunday, 22 minutes later, damper and thermo installed. The fridge is cooling. Today is Tuesday and everything is back down to temp. knuckle bump. Read more

More
$64.46
Compare At:
$77.35
You Save:
$12.89

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Dispenser Actuator Arm
Genuine Frigidaire part
By: Frigidaire
Part Number: 241681903

The Ice Dispenser Actuator Arm is an OEM part for Frigidaire refrigerators. It is designed to engage the ice dispensing mechanism when you press the lever or button on the ice dispenser. This actuator arm transfers the mechanical action needed to release ice from the dispenser into your glass or container.

You should replace the ice dispenser actuator arm if it becomes damaged, worn out, or fails to engage the ice dispensing mechanism properly. Common causes of a bad actuator arm include frequent use, mechanical wear, or accidental damage that can bend or break the arm.

Symptoms of a bad ice dispenser actuator arm include:

  • The ice dispenser not releasing ice
  • The dispenser lever feeling loose or unresponsive
  • Ice dispenser making unusual noises
  •  The actuator arm appearing bent or broken

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You It was the ice actuator the part was factory made extremely cheaply   William C. • Monticello , FL • August 30, 2015

First, your company web site is extremely helpful. If anyone chooses to do it theirself the ordering process is efficient, quick and easy. Things not found at many companies these days. The last time I ordered from you I got the part in the delivery system within 24 hours, but not so this time. Still I receive this part within 3 days, What I would expect normally when ordering from the internet. I'll never use any other appliance site unless you change for the worse, the customers are the... Read more

More
$64.46
Compare At:
$76.71
You Save:
$12.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Ice Bucket Housing
Genuine Frigidaire part
By: Frigidaire
Part Number: 241734001

The Ice Bucket Housing is an OEM part for Frigidaire refrigerators. This component serves as the main enclosure for the ice bucket, supporting and protecting the ice maker's storage bin. It is designed to fit securely within the freezer compartment, helping to maintain the ice in a solid state by insulating it from varying freezer temperatures and ensuring that ice production is efficient and consistent.

Symptoms of a failing Ice Bucket Housing include:

  • Ice melting or clumping together due to poor insulation
  • Difficulty in removing or replacing the ice bucket because of misalignment or damage to the housing
  • Cracks or damage in the housing that can lead to frost buildup or leakage
  • Unusual noises from the ice dispenser if the housing obstructs the dispensing mechanism

Causes of a bad ice bucket housing often involve physical impacts from handling, thermal stress from fluctuating freezer temperatures, or degradation of materials over time, leading to brittleness and breakage.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models

 

Note: For the complete ice container assembly with auger and moving parts, order part number 241860803.

Do-It-Yourself Stories from Customers like You Broken ice tray   Greg F. • Elberfeld , IN • February 28, 2015

Replacement tray from Appliance Parts Pro. Read more

More
$77.95
Compare At:
$92.76
You Save:
$14.81

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Defrost Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 216731001

The Defrost Thermostat is an OEM part for Frigidaire refrigerators and freezers. This part senses the temperature of the evaporator coil and triggers the defrost heater to melt away any accumulated frost. This process ensures that air can flow freely over the coils, keeping the refrigerator or freezer at the correct temperature and preventing overcooling or temperature fluctuations that can spoil food.

Causes of a bad defrost thermostat can include a failure to open or close properly, leading to an overaccumulation of frost on the evaporator coils, or physical damage that prevents it from sensing the correct temperature. 

Symptoms of a bad Defrost Thermostat include:

  • Frost build-up in the freezer compartment
  • The refrigerator or freezer is too warm
  • The compressor running longer than usual
  • Fresh food compartment becoming too warm

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You No cooling from refrigerator lights worked but compressor did not run   Jeff B. • Ovalo , TX • May 07, 2015

Checked compressor windings - ok. Start relay looked no rattle or burning. Start capacitor seamed ok but hard to check. No 120VC to start relay at any time. Ordered thermistor, and electronic control unit. Figuring it was a bad thermistor not telling the ECU it was warm and to turn on the compressor. Or the ECU was damaged and was not sending the 120v to the compressor. Changed the thermistor first (cheapest part and as Appliance parts pros has a return policy I wanted to start there). ... Read more

More
$58.95
Compare At:
$70.15
You Save:
$11.20

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Upper Crisper Pan Glass
Genuine Frigidaire part
By: Frigidaire
Part Number: 240350613

This Glass Shelf Inset is an OEM replacement part for Frigidaire refrigerators. Crafted from durable transparent glass, this shelf creates an enclosed area optimized for storing fruits and vegetables in the upper fridge compartment.

Causes of a damaged glass shelf insert can include chips or cracks developing from impact or excessive weight loads over time.

Symptoms of an inadequate upper crisper pan include:

  • Leaks or moisture inside upper refrigerator shelves
  • Blocked visibility of produce and food items
  • Inability to properly store hydrated fruits and veggies
  • Products drying out or spoiling faster without humidity control

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, and Kelvinator.

Do-It-Yourself Stories from Customers like You The water wasn't dispensing from door.   Amanda W. • Ferdinand , IN • May 02, 2022

After a lot of research, we initially changed out the inlet valve. When that didn't fix the issue, we went back to researching, and saw that it could be the freezer door switch. So we replaced that as well. Again this did not solve our issue. Back to researching. I then came across AppliancePartsPros.com! And I found so many other options of what it could be. I started with the water tube and after a bit of a struggle I was finally able to get it in and the water is dispensing again! Thanks,... Read more

More
$84.53
Compare At:
$100.59
You Save:
$16.06

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Hinge Bearing
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507147

The Hinge Bearing is an OEM part for Frigidaire refrigerators. It is designed to facilitate the smooth opening and closing of the refrigerator door by providing a pivot point for the door hinge. This bearing ensures that the door moves easily and remains properly aligned, helping to maintain a tight seal and optimal refrigerator performance.

Causes of a bad hinge bearing can include regular wear and tear from frequent use, exposure to moisture or temperature changes, and physical damage due to accidental impacts. Over time, these factors can cause the hinge bearing to wear out, become loose, or break, affecting the door's functionality.

Symptoms of a bad hinge bearing include:

  • Difficulty opening or closing the refrigerator door
  • The door not staying in place or sagging
  • Unusual noises, such as squeaking or grinding, when the door is moved
  • The door not sealing properly, leading to temperature fluctuations inside the refrigerator

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Frig door hinge worn letting door drag on bottom   Jerry P. • Shawnee , KS • January 21, 2017

My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more

More
$10.35
Compare At:
$12.21
You Save:
$1.86

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Freezer Door Bin
Genuine Frigidaire part
By: Frigidaire
Part Number: 240334202

The Freezer Door Bin is an OEM part for Frigidaire freezers. This bin fits into the freezer door, providing additional storage space for organizing smaller frozen items. It enhances the efficiency of your freezer by keeping these items easily accessible and well-organized.

Causes of a bad freezer door bin can include wear and tear from regular use, overloading, or accidental impacts that cause cracks or breakage. Exposure to extreme temperatures and handling during cleaning can also lead to damage.

Symptoms of a bad Freezer Door Bin include:

  • Cracks or visible damage to the bin
  • The bin not staying securely in place or falling out
  • Difficulty in fitting items into the bin due to warping
  • Items not being held securely within the bin

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water would not fill ice maker or out from water dispenser   Kenneth V. • Wesley Chapel , FL • December 11, 2016

I replaced the faulty water valve in about 15mins. It wsa super easy. We're back to making ice and filling cups of water again. Just in time too because we only had a few ice cubes left! Read more

More
$51.75
Compare At:
$61.06
You Save:
$9.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Bin-Door
Genuine Frigidaire part
By: Frigidaire
Part Number: 241808201

The Door Bin is an OEM part for Frigidaire refrigerators. It provides additional storage space on the refrigerator door, allowing for the convenient organization of smaller items such as condiments, beverages, and jars. This bin is designed to fit securely into the slots on the refrigerator door, making it easy to remove and clean when necessary.

Replace this door bin if it becomes cracked, warped, or no longer fits securely in the door slots. Over time, exposure to varying temperatures and frequent use can cause the plastic to weaken and break.

Symptoms of a bad door bin include:

  • Cracks or breakage in the plastic
  • Difficulty in securing the bin to the door
  • Items falling out or not staying in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Cracked shelves on door   Lynn M. • Monticello , GA • January 08, 2017

Found parts at AppliancePartsPros. Ordered parts. Received parts. Installed shelves. Easy Peary! Read more

More
$58.60
Compare At:
$69.15
You Save:
$10.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dairy Door
Genuine Frigidaire part
By: Frigidaire
Part Number: 240338313

The Dairy Door is an OEM replacement part for Frigidaire side-by-side refrigerators. As the access point to the dedicated dairy compartment, the door is designed with precision seals to maintain optimal humidity levels inside. This helps keep dairy and other perishable items fresh longer.

Causes of a bad dairy door can include worn or damaged seals, dents or impacts warping the door frame, or issues with the electronic components that control humidity levels.

Symptoms of a bad dairy door include: 

  • Excessive frost or ice buildup inside the dairy compartment   
  • Difficulty opening and closing the door smoothly  
  • Warm or dried-out dairy products despite a cold refrigerator interior
  • Moisture leaks around the door seals  

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side models.

Do-It-Yourself Stories from Customers like You Cracked dairy door   Kirk R. • Charlottesville , VA • May 08, 2017

Ordered the part, it arrived the next day! Read more

More
$61.95
Compare At:
$73.72
You Save:
$11.77

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 215503203

Specs: 10-16 X 0.500

Do-It-Yourself Stories from Customers like You Broken handle   Jack M. • Memphis , TN • November 04, 2018

No problem, 1 min to fix Read more

More
$6.59
Compare At:
$7.25
You Save:
$0.66

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Freezer Door Shelf Bin
Genuine Frigidaire part
By: Frigidaire
Part Number: 240495805

The Freezer Door Shelf Bin is an OEM replacement part for Frigidaire refrigerators. It provides adjustable storage on the inside of the freezer door with removable bin shelves. These bins maximize storage potential in the limited door space through customizable shelving.

Causes of a bad Door Shelf Bin can include shelf breakage from heavy loads, damage to supporting rails or walls of the bin inhibiting proper shelf attachment and use, or broken/missing bin walls reducing structural integrity.

Symptoms of a bad Door Shelf Bin include:

  • Detached or missing shelves
  • Shelves that do not stay firmly in place when loaded
  • Damage or deterioration of bin walls
  • Insufficient or compromised storage space

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Tenants broke all door handle's all freezer door bins and all refrigerator door bins.   Sovina H. • Brighton , MA • February 09, 2018

The replacement is easy as stated in total replacement time is 25 minutes. Read more

More
$47.95
Compare At:
$67.42
You Save:
$19.47

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Adjustable Hinge Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918455

The Adjustable Hinge Kit is an OEM part for Frigidaire refrigerators. This kit includes the components necessary to adjust and secure the refrigerator door hinges, ensuring the door opens and closes smoothly and maintains a proper seal.

Causes of a bad hinge kit can include wear and tear from regular use, physical impact, or loosening of the hinges over time. Misaligned doors can lead to energy inefficiency and temperature fluctuations inside the refrigerator.

Symptoms of a bad adjustable hinge kit include:

  • The refrigerator door not closing properly
  • A noticeable gap between the door and the refrigerator body
  • Difficulty in opening or closing the door
  • Cold air escaping from the refrigerator

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken door hinge cam   Mike M. • Waterloo , NY • June 21, 2016

Ordered the replacement parts and had them the next day! Very nice. Read more

More
$98.52
Compare At:
$116.25
You Save:
$17.73

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store