Prg304gh/20 Parts

This display is the user interface module that shows cycle status, settings and error indicators so you can read and control the appliance from the front panel. It restores visible feedback and menu information for normal operation. What it does

• Provides the visible display for cycle progress, timers and selected options
• Shows error codes and status messages to help identify issues
• Works with the appliance control board to update settings and user inputs
• Restores readable display after a failed or cracked panel

• Disconnect power to the appliance before starting work to avoid shock or damage
• Replacement typically requires removal of the front control or console panel; handle the display lens and ribbon connectors carefully
• Keep screws and small fasteners organized for reassembly

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a worn, stripped, or missing screw helps keep parts aligned and tight, reducing vibration and preventing loosening during normal operation.

• Provides secure threaded attachment at the specified mounting points
• Helps maintain alignment of panels, brackets, and covers
• Replaces missing, rusted, or stripped hardware
• Typical symptoms: loose or rattling panel, misaligned trim, difficulty tightening, or a visibly missing screw

• Disconnect power and shut off gas/water before servicing
• Use the exact hardware specified for your model; lengths and threads are not interchangeable
• Hand-start threads to avoid cross-threading; tighten snugly—do not overtighten
• Retain and reuse any original washers or clips if present

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly

This replacement tube routes water between internal components to maintain a sealed, reliable flow path. Swapping a cracked or hardened tube helps stop leaks and restore proper circulation and overall appliance performance.

• Carries water between internal components and maintains proper flow
• Helps keep connections watertight to prevent drips and pooling
• Replace if you see leaks, visible cracks, kinks, or a loose fit
• Restricted flow from a worn tube can contribute to reduced cleaning/performance

• Disconnect power and turn off the water supply before servicing; allow the unit to cool
• Remove access panels and keep towels handy for residual water
• Note the original routing and connection depth; transfer any fittings or clamps from the old tube if applicable
• Push the tube fully onto fittings and secure; run a test cycle and check carefully for leaks

This support mounting bracket secures internal components to the appliance chassis, restoring proper alignment and reducing movement that can cause noise or malfunction. Use it to replace a cracked or bent support that no longer holds parts firmly. What it does:

• Holds and stabilizes internal assemblies to prevent rubbing, vibration, or misalignment
• Restores proper component positioning that can stop intermittent noises or poor operation
• Prevents further wear by keeping parts securely fastened during use
• Works wherever the original support bracket has failed, bent, or broken

• Disconnect power and water before starting any repair
• Wear gloves to protect against sharp sheet-metal edges during removal/installation
• Typical installation requires basic hand tools; keep fasteners from the original part for fitment
• Follow the appliance service manual for disassembly and torque specifications

This hinge plate is a replacement door hinge support that helps secure and align the appliance door for smooth opening and closing. Restores proper door alignment and support when the original hinge plate is worn or damaged. What it does:

• Provides a mounting surface for the door hinge to keep the door aligned
• Helps prevent door sagging, misalignment, and uneven closing
• Restores stable door movement and reduces stress on hinge assemblies
• Works with the existing hinge hardware to maintain proper door operation

• Hinge plate

• Disconnect power to the appliance before attempting any repairs and remove any water supply if applicable
• Handle the door carefully during removal/installation to avoid dropping or damaging the door or trim
• Use basic hand tools; support the door while swapping hinge components to prevent injury or damage

This compression nut secures 3/8 in. refrigeration or water tubing to a matching compression fitting, creating a tight mechanical seal for supply lines. It's a simple, serviceable fastener used on valves and pipe connections. What it does:

• Threads onto a compression fitting to hold ferrule and tubing in place
• Helps create a leak-resistant joint on 3/8 in. tubing connections
• Commonly used on water supply, ice maker, or refrigeration line fittings
• Replaces a worn or damaged nut that causes loose or leaking connections

• Turn off water or power to the appliance and relieve system pressure before servicing
• Hand-start threads to avoid cross-threading; tighten snugly with appropriate wrenches
• Inspect ferrule and tubing; replace ferrule or cut tubing square if reusing connection
• If you see persistent leaks after tightening, stop and check components.

This compression sleeve seals 3/8-inch refrigeration or water tubing where a compression fitting is used, restoring a tight, drip-free connection. It's a simple replacement to stop leaks and ensure a secure joint. What it does:

• Acts as the ferrule inside a compression fitting to compress against tubing and create a seal
• Restores a worn or flattened sleeve that causes leaks at nuts or fittings
• Used with a matching compression nut and fitting to secure 3/8" tubing
• Commonly replaced when connections leak, weep, or fail to hold pressure

• One compression sleeve sized for 3/8 in. tube

• Turn off and depressurize the system (water or refrigeration) before removing fittings
• Cut tubing square and deburr before installing the sleeve for best seal
• Slide the nut then the sleeve onto the tube, seat against the fitting, and tighten to manufacturer torque
• Inspect the joint for leaks after pressurizing and retighten if needed; replace sleeve if damaged during installation

This replacement screw fastens appliance components to restore secure assembly and stable operation. It's a direct-fit fastener used where the original screw has stripped, corroded, or been lost. What it does:

• Secures panels, brackets, or small assemblies to prevent vibration and misalignment
• Restores proper fit where a damaged or missing screw causes rattling or loose parts
• Provides the correct fastening point for unchanged OEM mounting locations
• Works as a like-for-like replacement when the original screw is worn or missing

• Screw

• Turn off and unplug the appliance before beginning any repair
• Use the matched screwdriver or driver bit to avoid stripping the head
• Replace with the same thread engagement depth; do not force or overtighten
• Repair with the appropriate method before installing