Prg305wh Parts

This panel insert is the replacement control-panel trim that restores a clean, finished look and protects the console area from scratches and wear. It fits into the console to cover and support the control surface. What it does:

• Replaces cracked, scratched, or cosmetically damaged control-panel trim
• Protects underlying buttons and electronics from everyday wear and spills
• Restores a uniform appearance to the appliance front for a like-new finish
• Helps ensure control buttons and labels sit correctly in the console area

• Disconnect power to the appliance before starting any repair
• Access may require removal of the console or outer door; follow the OEM service manual
• Handle the insert carefully to avoid scratches; align tabs/clips before applying pressure

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This tension spring secures and balances moving assemblies, restoring proper door or component tension and smooth operation. Use it to replace a worn, stretched, or broken spring for reliable mechanical return force. What it does:

• Provides restoring tension to a door, latch, or moving linkage so it closes or returns smoothly
• Replaces weakened or broken springs that cause sagging, loose movement, or improper latching
• Helps correct symptoms like noisy operation, parts that won't stay closed, or uneven movement
• Works as a direct-fit replacement when the original spring has lost tension or snapped

• One replacement tension spring

• Turn power off and disconnect the appliance before servicing to avoid injury
• Inspect surrounding clips, pins, or mounting points and replace any damaged hardware
• Use pliers or appropriate tools to remove/install the spring carefully; springs can snap back

This surface burner replaces a damaged or worn cooktop burner to restore even, reliable heating for gas ranges and cooktops. It fits into the burner base and provides the proper flame pattern for cooking performance. What it does:

• Directs gas to the cooktop slot so the burner produces a controlled flame for cooking
• Restores even heating when an old burner causes uneven cooking or hot spots
• Helps eliminate weak or irregular flames caused by dents, warping, or corrosion
• Works with the existing burner base and ignition system when correctly matched

• One surface burner

• Turn off the appliance's gas and power before removing or installing the burner
• Remove grate and any clips or screws holding the old burner; seat the new burner securely in the burner base
• Clean surrounding surfaces and ports of debris before installation to ensure proper flame pattern

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly

A Trident-style surface burner head that directs gas to the cooktop burner for an even, controlled flame. Replaces a worn or damaged burner head to restore consistent heating and safe operation. What it does:

• Directs and shapes the gas flame for proper cooking heat
• Restores even flame pattern when the original burner is warped or clogged
• Helps eliminate weak or irregular flames caused by damaged ports
• Works with the burner base and cap to maintain stable ignition

• Turn off the appliance and shut off gas/electric power before servicing
• Remove grates and burner cap, then replace the burner head; reassemble in reverse order
• Clean mating surfaces of debris or corrosion before installation for proper fit

This heat shield protects the area beneath the cooktop/oven from heat and accumulated spills, helping prevent damage to nearby components and simplifying cleanup. Designed to fit in the original mounting location. What it does:

• Deflects and dissipates heat away from sensitive components and cabinetry
• Catches and channels spills or drips away from burners and electrical parts
• Helps reduce risk of scorched surfaces and heat-related discoloration
• Restores proper clearance and protection after removal or damage

• Disconnect power (and gas, if applicable) and allow the appliance to cool completely before starting
• Handle carefully; edges may be sharp and mounting tabs can be fragile
• Verify correct orientation and secure mounting per manufacturer instructions

This replacement tube routes water between internal components to maintain a sealed, reliable flow path. Swapping a cracked or hardened tube helps stop leaks and restore proper circulation and overall appliance performance.

• Carries water between internal components and maintains proper flow
• Helps keep connections watertight to prevent drips and pooling
• Replace if you see leaks, visible cracks, kinks, or a loose fit
• Restricted flow from a worn tube can contribute to reduced cleaning/performance

• Disconnect power and turn off the water supply before servicing; allow the unit to cool
• Remove access panels and keep towels handy for residual water
• Note the original routing and connection depth; transfer any fittings or clamps from the old tube if applicable
• Push the tube fully onto fittings and secure; run a test cycle and check carefully for leaks

This support mounting bracket secures internal components to the appliance chassis, restoring proper alignment and reducing movement that can cause noise or malfunction. Use it to replace a cracked or bent support that no longer holds parts firmly. What it does:

• Holds and stabilizes internal assemblies to prevent rubbing, vibration, or misalignment
• Restores proper component positioning that can stop intermittent noises or poor operation
• Prevents further wear by keeping parts securely fastened during use
• Works wherever the original support bracket has failed, bent, or broken

• Disconnect power and water before starting any repair
• Wear gloves to protect against sharp sheet-metal edges during removal/installation
• Typical installation requires basic hand tools; keep fasteners from the original part for fitment
• Follow the appliance service manual for disassembly and torque specifications