Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven won't light or takes forever to preheat? A weak igniter is the likely cause. This glow igniter heats to ignite gas burners. DIY install in 30-60 min.
Replaced both ignitors. Since I was working on the range I also overhauled the final 2 of the 6 burners on the stove top. Venturi tube and jet nuts were frozen and could not remove drip tray for cleaning and access to ignitor clip. Had to drill out Venturi tubes using a tapered bore bit. Used Dremmel with cutting wheel to remove jet nut. This range has been heavily used since new for 16 years. Works like new, again. Read more
Gas burner won't light or clicks repeatedly? This spark igniter electrode creates the spark to ignite gas. Simple DIY repair restores reliable ignition.
Looked at videos online. Diagnosed problem. Contacted appliance part pros received part in 2 days like I requested. Install was simple. Oven works. Read more
This 1/4-inch gas supply tube routes fuel between internal gas components to deliver a stable, leak-resistant supply to the burner. Replacing a damaged tube helps restore safe operation and consistent burner performance.
I had to cut out the venturi with one of those vibrating tools with a narrow metal blade like a hack saw. Takes time and wear your ear plugs . I had two different repair guys here they both said I need a new range . It's 15 years old and 9 grand to replace it. No No . I'll fix it and I did . Read more
This potentiometer is the rotary sensor behind the control knob. It converts knob rotation into an electrical signal the control board uses to adjust settings, restoring smooth, accurate response when a worn or erratic control causes inconsistent operatio
I ordered all the parts from AppliancePartsPros.com and in two days I had every new part that was. Ordered. After being told from the appliance repair company that I wouldn’t get parts for months. I received all parts within 4 days, 19 different parts! Read more
Replacement jet holder for gas range and cooktop burners. Secures the orifice and channels gas flow. Order when original is corroded, damaged, or broken.
The oven was not heating, and there was no gas flow to the oven or spark. I replaced the spark igniter, but that did not fix it, so the problem was either the ignition device or the oven bake solenoid. In order to get to them, I had to cut the venturi tubes which hold down the burner rings with a Dremel tool, which was easy enough. There is no other way to get these tubes out if they are stiff or seized as you will simply twist the gas supply line to the burner if you try to rotate the nut.... Read more
Mounting screw secures burner components and panels on gas ranges. Replace if stripped, corroded, or broken to restore proper alignment and fit.
Removed two burner heads. Needed propane torch to heat two Torx head screws on each.. Soaked ignitor retainer Torx head screws in Nut Blaster. Got one out and broke the other. Scraped carbon/rust out of area that retainer sits in so ignitor was proper height and square/ plumb. That burner worked fine with old part. Drilled other Torx head screw out and all the way through burner head. Ground down back side of burner head to accommodate screw/nut (very soft metal). Attached new ignitor... Read more
Can't switch oven modes or cooking functions? This selector switch controls bake, broil, and warming settings. Moderate DIY repair for most ranges.
The Burner Head and Cap Assembly is an OEM part for Bosch ranges and cooktops. It contains the burner itself along with its protective cover.
Cracks or misshapen portions disrupt flame stability leading to inconsistent results.
Symptoms
Our appliance repairman said he would order a new burner cap. We waited 7 months; each time we called he said it was on order. After having to cook Thanksgiving and Christmas dinners on 3 burners we gave up and ordered the part ourselves. It took 5 days to get here and less than one minute to install; it fit perfectly and works like new. Read more
Fix burners that won't ignite or click. This spark module controls ignition for gas range burners. Common DIY repair takes about 10-15 minutes.
First I checked both spark igniters (range has two ovens) by testing them on the oven that did work. Both were good. I then checked the spark igniter wiring & it was good. At this point I contacted Appliance Parts Pros to ask which spark module I should order, the problem was that there wasn't a model number on the appliance. After speaking to the rep I ordered the ignition devise pictured above. Installed it and it worked! Read more
Replacement glass panel for gas range door or front fascia. Needed when original glass is cracked, shattered, or broken. Restores appearance and safe use.
Replaced it. Read more
Controls gas supply pressure to burner manifold. Replace if regulator is cracked, sticking, or no longer maintaining correct pressure for consistent flames.
Fixes burner not getting gas or won't ignite. Solenoid valve controls gas flow to individual burners. Moderate DIY repair for gas ranges and cooktops.
This OEM replacement part is a motor assembly for ovens. The motor assembly is the main motor that powers the oven fan which is responsible for maintaining and adjusting the temperature in an oven. If the oven is no longer heating properly, turning on, or
Replacement drip pan for gas cooktops and ranges. Sits beneath burners to catch spills and protect the cooktop base. Replace if cracked, warped, or rusted.
Telescopic oven rack designed for gas ranges. Slides out smoothly for easy access while cooking or cleaning. Replace if damaged, warped, or worn.
This pilot light lens covers and diffuses the control-panel indicator lamp. Replace a cracked, missing, or discolored lens to restore clear visibility of the light, protect the lamp opening, and keep the panel looking finished.