Ps960y98fs Parts

Color: Stainless Steel

The Handle is an OEM part for GE ranges. It is the outer handle used to open and close the oven door. The handle plays an important role in providing an easy grip to safely access the oven interior.

Causes of a bad handle could include damage over time due to repeated use, chemical exposure from spills or cleaners, or loss of integrity from excessive heat.

Symptoms of a bad handle include:

• Loose fit or sensation when opening/closing the oven door
• Visible cracks, chips, or discoloration of the handle material
• Difficulty gripping or lifting the handle
• Potential safety issues if the handle breaks off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Range overheating or heating element won't turn off? This high-limit thermostat cuts power when temperatures exceed safe levels. Quick safety fix.

Small rubber bumper that cushions contact between oven door and cabinet. Replace if cracked, missing, or worn to reduce noise and protect finishes.

This side support panel replaces a damaged or missing support on the appliance's side, helping secure and align the cabinet and trim so the unit sits solidly and looks finished after installation or service. What it does:

• Provides structural support for the side of the appliance cabinet and adjacent trim
• Helps maintain correct spacing and alignment next to countertops or panels
• Replaces a bent, warped, or corroded panel
• Reduces rattles or rubbing caused by a loose side assembly

• One side support panel

• Disconnect power; turn off gas supply before servicing
• Carefully pull the unit forward for side access; support it to prevent tipping
• Remove fasteners, transfer any clips/brackets from the old panel, and reinstall with existing hardware
• Wear cut-resistant gloves and verify clearances and level before final tightening

Decorative badge assembly that mounts on the front of your range. Displays brand and model information. Replace if cracked, peeling, or missing.

Seals and cushions your oven door to reduce vibration and rattling. Replace when worn to restore proper spacing and eliminate air leaks. Verify fit.

This blower and fan assembly circulates air through the appliance to support proper airflow and venting. Replacing a worn assembly restores air movement and helps maintain even operating temperatures. What it does:

• Moves air through the appliance to support heating, cooling, or venting cycles
• Helps maintain proper airflow for consistent performance
• Can stop working or slow down when the motor or wheel wears out
• Worn or noisy blower assemblies may cause reduced airflow, weak performance, or unusual noise
• Restoring the assembly often resolves airflow-related symptoms

• Disconnect power to the appliance before beginning any service
• Basic hand tools are typically required; follow the appliance service manual for access steps
• Handle the blower wheel and motor carefully to avoid bending fins or contaminating the motor

8-18 AB IHW 5/8 S

This maintop glass assembly replaces a cracked, scratched, or burned cooktop surface to restore a clean, even work area and proper support for burners and cookware. It improves appearance and ensures a safe, level cooking surface. What it does:

• Replaces damaged or worn maintop glass to stop heat leaks and prevent debris buildup
• Provides a stable, flat surface for burners, grates, and cookware
• Restores the factory look and helps prevent cuts from cracked glass
• Can stop cooking performance issues caused by warped or broken glass

• One maintop glass assembly

• Disconnect power (and gas, if applicable) before starting any work
• Handle glass carefully; wear gloves and eye protection to avoid injury
• Follow the oven/range service manual for lifting/removing the cooktop and routing wires or clips
• If clips, screws, or gasketing are corroded or broken, replace them per OEM guidance

Fix burning smell or electrical arcing from loose terminal connections. This terminal block assembly connects your range's internal wiring to power supply.

Vent tube that channels hot air from your electric range oven to the exhaust path. Replace if cracked, warped, or missing to restore proper ventilation.

If your range or oven has a circuit not working or intermittent function, this electrical jumper wire bridges terminals to restore proper continuity.

This stainless control panel overlay provides the exterior touch surface and labeling for the oven/range control area while accommodating Wi-Fi controls, restoring a clean appearance and readable touch interface. What it does:

• Replaces the front-facing control overlay that shows button legends and icons for oven functions and Wi-Fi status
• Restores responsive touch/capacitive labels and readable indicators for cooking controls
• Helps resolve cosmetic damage, peeling, faded legends, or worn button markings
• Keeps the control area sealed and aligned for proper user interaction

• One stainless control panel overlay with Wi-Fi cutouts and printed legends

• Install requires panel removal and basic disassembly of the console; follow OEM instructions
• Handle the overlay carefully to avoid scratching the finish or damaging printed legends
• Disconnect power to the appliance before beginning any service to prevent shock or unintended operation
• Use only manufacturer-recommended fasteners and gaskets when reassembling

This lower oven warming element heats the oven's warming/holding compartment so food stays warm until serving. Replaces a damaged or non-heating lower element to restore consistent low-temperature operation. What it does:

• Heats the oven's warming/lower compartment for holding cooked food
• Replaces elements that show visible damage, burn-through, or no heat output
• Helps restore even low-temperature performance when the warmer function fails
• Works with the oven's temperature control and safety circuits to provide steady heat

• One lower oven warming element

• Disconnect power at the breaker before beginning any repair
• Wear gloves; element edges and terminals may be sharp
• Verify proper wiring and secure terminal connections during installation

Replacement mounting screw for cooktops and ranges. Secures cooktop components to the frame. Replace if screw is stripped, missing, or damaged.