Psa91205f4ss Parts

The Diode Cable Assembly is an OEM part for GE microwaves. This part converts AC power to DC power, which is crucial for the microwave's operation.  

Causes of a bad diode cable assembly can include electrical surges, overheating, or general wear and tear.  

Symptoms of a bad diode cable assembly include:

• Microwave not heating food
• Unusual noises during operation
• Burning smell or visible damage to the cable
• Microwave shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This magnetron is the microwave's RF generator—the tube that creates the microwave energy used to heat food. Replacing a failed unit restores proper heating performance so your oven reliably cooks, reheats, and defrosts as intended. What it does:

• Produces high-frequency microwave energy to heat food inside the cavity
• Common failure symptoms: runs but no heat, loud humming/buzzing, burning odor, breaker trips or shutting off shortly after start
• Resolves weak heating and unusually long cook times when the magnetron has degraded

• 1 magnetron

• Unplug the microwave and discharge the high-voltage capacitor before servicing; high voltage can remain even when unplugged
• Handle the tube by the metal body; avoid stressing the ceramic insulators or antenna
• Reinstall using the original mounting hardware; ensure correct orientation and reconnect wires as noted
• Test with a cup of water after reassembly; if no heat persists, further diagnosis of the HV diode, capacitor, or transformer may be required

This suction guide positions and supports the appliance's suction component to help ensure proper fit and reliable operation. Replacing a damaged guide restores alignment so the suction assembly can work as intended. What it does:

• Holds and guides the suction component or cup into the correct position
• Prevents misalignment that can cause vibration, rubbing, or reduced suction performance
• Helps maintain a consistent seal where the suction component interfaces with the appliance
• Useful when the original guide is cracked, broken, or worn

• Disconnect power (and water, if applicable) before servicing the appliance
• Access may require removing an outer cover or access panel and a few fasteners
• Handle plastic parts carefully to avoid cracking during removal and installation

This stainless steel door assembly replaces a damaged or dented refrigerator door to restore proper sealing and the appliance's appearance. It provides a factory-fit outer door surface so the refrigerator closes properly and looks like new. What it does:

• Replaces the outer refrigerator door panel to repair dents, scratches, or corrosion.
• Restores proper door alignment and sealing that can help the door close evenly.
• Improves the appliance's exterior appearance with a matching stainless finish.
• Helps protect internal insulation and components by replacing a compromised door surface.

• Disconnect power and empty the door before starting; remove food and loose shelves.
• Door assemblies can be heavy and awkward—have a second person assist during removal/installation.
• Keep fasteners and brackets organized; verify hinge and seal alignment during reassembly.
• If mounting hardware or gaskets are damaged, replace them as well.

This door latch spring restores the correct return tension in the latch mechanism so the door secures and releases reliably. Replacing a fatigued or broken spring brings back smooth latch action and dependable door operation. What it does:

• Provides the return tension for the door latch mechanism
• Helps the latch engage and release properly
• Common failure signs include a door that won't latch or pops open, or a latch lever that feels loose or sticks
• Some cycles may not start if the door isn't recognized as closed

• 1 door latch spring

• Disconnect power before servicing
• Access the latch mechanism; note the spring's original routing and anchor points
• Use needle-nose pliers and eye protection when removing/attaching the spring
• Test latch movement and door operation before reassembly

This microwave choke cover snaps over the inner edge of the door to conceal and secure the door's RF choke assembly. Replacing a damaged or missing cover restores a finished look and helps ensure proper door shielding and latch alignment.

• Covers and protects the door's RF choke area/liner
• Helps maintain correct door fit and shielding performance
• Common symptoms: loose or missing inner door trim, cracked/broken cover, gaps around door edge, rattling from door area
• Color/finish and texture may vary by model application

• Disconnect power to the microwave before servicing
• Use non-marring tools to release clips and avoid scratching the door
• Transfer any reusable clips/tabs from the old cover if required by your model
• Press firmly around the perimeter to seat all retaining tabs; inspect for even gaps

This fan assembly circulates air inside the appliance to help maintain proper cooling and airflow, restoring efficient operation and reducing temperature and moisture-related issues. What it does:

• Moves air through the appliance evaporator and cabinet to support temperature regulation
• Helps prevent warm spots and excess frost buildup by improving airflow
• Reduces overheating of components by improving ventilation
• Stops unusual noise or vibration when a worn fan is replaced

• Disconnect power before servicing to avoid electrical shock.
• Handle the fan blades carefully to avoid damage or injury.
• Verify proper mounting orientation and connector seating during installation.
• Test operation after installation and reassemble panels securely.

This mount vent motor cover secures and protects the dryer vent motor assembly so the motor stays aligned and free from debris. It helps reduce abnormal noise and vibration while maintaining safe airflow through the vent housing. What it does:

• Secures the vent motor to the housing to keep the motor stable during operation
• Protects the motor from lint, dust, and foreign objects that can cause damage
• Helps reduce rattling, vibration, and noise caused by a loose motor mount
• Maintains proper airflow routing around the vent motor for efficient operation

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; retain or replace any mounting screws as needed
• Watch for sharp sheet-metal edges and wear gloves to protect your hands
• Verify motor alignment and secure fasteners snugly but avoid over-tightening

This fan stirrer assembly is a direct-replacement air circulation component that helps move air inside the appliance cavity for more even temperature distribution and improved venting performance. Restores correct airflow when the original stirrer is worn or damaged. What it does:

• Circulates air to promote more even heating or cooling across the cavity
• Replaces cracked, broken, or missing stirrer blades that reduce airflow
• Helps reduce hot/cold spots and poor cooking or cooling performance
• Can eliminate unusual noises caused by a damaged or unbalanced stirrer

• Disconnect power to the appliance before starting any repair
• Remove access panels or interior liners as required to reach the existing stirrer
• Handle the plastic blades carefully to avoid damage; ensure proper alignment and secure mounting hardware
• Test appliance operation after installation and reassemble panels per OEM guidance