Psa9240sfss Parts

Turntable shaft that connects the microwave motor to the glass tray so the turntable rotates smoothly for more even heating. Replacing a worn or broken shaft helps stop wobbling, slipping, or scraping during rotation. What it does:

• Transfers rotation from the motor to the glass turntable so dishes rotate while cooking.
• Centers and supports the glass tray to reduce wobble and ensure consistent rotation.
• Use when the tray won't turn, slips on the motor coupler, or makes knocking/scraping noises.
• Fits into the turntable coupler and works with the roller ring and glass tray to maintain stable motion.

• 1 turntable shaft

• Disconnect power before servicing and remove the glass tray and roller ring to access the shaft.
• Shaft typically presses into the motor coupler; remove the old shaft and press the replacement into place.
• Inspect the roller ring and glass tray for damage when replacing the shaft; replace any worn pieces for best results.

This auxiliary cooktop holder is a replacement support bracket that helps keep the cooktop or burner assembly aligned and secure for stable, rattle-free operation. Restores proper positioning of components after wear or damage. What it does

• Supports and anchors the cooktop/burner assembly to prevent shifting during use
• Keeps burner and trim pieces aligned for even surface contact and safe operation
• Reduces rattling, vibration, and gaps between cooktop components
• Helps restore secure mounting after broken or worn original brackets

• Disconnect power (and gas, if applicable) before starting any repair
• Use proper hand tools; part secures with fasteners—retain and reinstall all screws
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover

This AC fan motor is the refrigerator fan motor that circulates air to maintain proper cooling and airflow. It replaces a worn or failed fan motor to help restore steady airflow and consistent temperatures. What it does:

• Spins the evaporator/condenser fan blade to move air through the refrigerator cooling system
• Restores airflow when fan has stopped running or runs intermittently
• Reduces unusual fan noise or vibration caused by a failing motor
• Helps correct uneven cooling or frost build-up linked to poor air circulation

• Disconnect power to the appliance before starting any work
• Handle the fan blades carefully to avoid bending or injury
• Verify fan blade seating and clearances during reassembly to prevent rubbing

A replacement relay board that restores the control relay functions used to switch high-current components in the appliance. Installs behind the control panel to help re-establish reliable electrical switching and operation. What it does:

• Acts as a switching module that delivers power to high-current components when commanded by the main control
• Common symptom: appliance components fail to run or intermittently stop despite proper control signals
• Common symptom: clicking or buzzing from the control area when a component tries to start
• Helps correct failures caused by burned or stuck relay contacts that prevent power delivery

• Disconnect power to the appliance before inspecting or replacing the board
• Handle the board by its edges and avoid touching circuitry to reduce ESD risk
• Verify mounting orientation and connector seating; ensure all wiring harnesses are fully engaged

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This nonstick tray-grille pan is the oven broiler pan used to catch drippings and hold food for broiling, grilling and roasting. The durable nonstick finish helps reduce sticking and makes cleanup easier. What it does:

• Holds food during broiling and grilling to promote even exposure to heat
• Catches grease and drippings to help reduce smoke and oven mess
• Designed to work with the oven's broiler system for high-heat cooking tasks
• Nonstick surface helps prevent food from adhering and simplifies cleanup

• One nonstick tray-grille pan

• Make sure the oven is completely cool and power is off before handling or installing parts
• Slide the pan onto the broiler support or oven rack in the same orientation as the original part
• Use oven mitts or gloves when removing the pan after cooking; let it cool before cleaning
• Clean with a soft sponge and mild detergent to preserve the nonstick finish; avoid abrasive pads

This is a truss-head self-tapping screw used to secure appliance panels and trim. It replaces a lost or damaged mounting screw to restore proper fit and stop rattles or loose parts. What it does

• Secures trim, panels, brackets or small components where a low-profile, wide-head screw is required
• Self-tapping design cuts threads into sheet metal or similar substrates—no nut required
• Restores tight mounting to reduce vibration, rattling or misaligned panels
• Commonly used in refrigerators, ranges and other household appliances

• One truss-head self-tapping screw

• Disconnect power to the appliance before servicing and work on a cool appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten—turn until snug and the part is secure but not distorted
• Replace with the exact part number to ensure fit and function

This heater sheath is the protective metal sleeve that surrounds a dryer/oven heating element, helping protect the element and focus heat where needed for reliable appliance heating performance. What it does:

• Protects and supports the heating element inside the appliance
• Helps direct and contain heat for efficient operation
• Can prevent direct contact between the element and surrounding components
• Commonly replaced when the sheath is corroded, dented, or damaged
• Linked to uneven heating or visible element damage

• High-level replacement only; disconnect power before servicing to avoid shock hazard
• Inspect surrounding components (element, terminals, mounting clips) and replace any damaged parts
• Use proper fasteners and ensure sheath is seated securely to avoid contact with other components

This tapping pan-head screw secures interior panels and components in appliances, providing a low-profile head and threads that form into metal for a firm hold. It's a direct-fit fastener for repairs and replacements. What it does

• Fastens panels, brackets and small appliance components where a self-tapping screw is required
• Pan-head profile gives a flush, low-profile finish that resists snagging
• Threads cut into mating metal to create a secure attachment without a nut
• Commonly used where sheet-metal or thin-frame fastening is needed

• One tapping pan-head screw

• Use the correct screwdriver bit that matches the screw recess to avoid stripping
• Start in a pilot hole or with light initial pressure to ensure proper thread formation
• Tighten until snug; do not over-torque — overtightening can strip threads or deform panels
• Wear eye protection when working with metal fasteners and sheet metal

The Vent Grille is an OEM part for GE microwave ovens. It is located at the top of the appliance to safely vent heated air and moisture outside during operation. 

Causes of failure can be normal wear over time, impact damage, or exposure to extreme heating levels during cooking.

Symptoms of a bad vent grille include:

• Reduced air flow causing interior components to overheat
• A loose or detached grille that poses a potential hazard  
• Openings that allow small items to fall down behind the microwave
• A warped or discolored surface affecting the appliance's appearance

This original GE replacement grille is also compatible with Hotpoint, RCA, and select Kenmore microwave models.

This is the microwave's magnetron—the high-voltage tube that generates microwave energy to heat food. Replacing a failed magnetron can restore normal heating performance and consistent cooking. What it does and common symptoms:

• Produces the microwave energy that heats and cooks food
• Microwave runs but doesn't heat
• Loud humming or buzzing from the high-voltage section
• Trips the internal fuse or household breaker at start-up
• Unusual burning odor indicating an internal short

• 1 magnetron

• Unplug the microwave; the high-voltage capacitor can retain a dangerous charge even when unplugged.
• Handle the antenna dome carefully; avoid touching or contaminating its surface.
• Transfer any required brackets, insulators, or thermal cutouts from the original part as designed; ensure correct orientation and secure mounting for proper cooling.
• Reinstall all covers, grounds, and door-interlock components exactly as designed before testing.

This lamp bracket secures the oven/range light assembly in place so the bulb and socket stay aligned for reliable interior lighting. It restores a stable fit when the lamp or housing is loose or mispositioned. What it does:

• Holds the lamp socket or housing firmly to the appliance cavity to prevent movement and rattling.
• Maintains proper lamp alignment so the bulb illuminates the cooking cavity as intended.
• Helps reduce intermittent lighting or poor contact caused by a loose bracket.
• Fits into the lamp/light housing area and provides a mounting point for the bulb assembly.

• One lamp mounting bracket.

• Disconnect power to the appliance before starting any repair to avoid shock hazard.
• Remove the bulb and any trim or covers to access the bracket; handle the bulb with gloves or a cloth.
• Typical installation uses basic hand tools; keep track of screws and orientation for reassembly.
• If wiring or the lamp socket is damaged, inspect and replace those components separately.

This control mounting panel secures the appliance control/console assembly, providing a stable mounting surface that helps keep buttons, switches, and electronics aligned for reliable operation and easier repairs. What it does:

• Provides a rigid mounting surface for the control/console assembly
• Keeps control board and user interface components properly aligned
• Helps prevent movement or vibration-related contact issues
• Common replacement for cracked, bent, or damaged control panels that misalign controls

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing the console or outer panel; keep fasteners organized
• Handle the control board and connectors carefully to avoid damage