Psc25ngscbb Parts

Temp sensors (3 or them), new heater, then finally custom cool/fan and shroud to bring the fridge temp back up. I don't believe the sensors were bad as the checked fine with a millimeter, coil heater was bad as they were frozen solid, and the fan was intermittent. I originally thought I fixed with the coil heater, but the fridge stopped working about a day later. Discovered the problem using the door switch. If you press the switch, the custom cool fan should turn on to circulate cool air... Read more

When we inspected the first time we found that Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will... Read more

I ordered a clip retainer which hold the compressor in place. First, I discovered there are four clips and the one which I could easily move or turn by hand I ordered a replacement. The part came fast. In less than two minutes I had completed the repair. Read more

This square beauty ring was snapped in place with about 12 small retaining studs that were part of the beauty ring. By using my fingernails I could pull out the ring a bit all the way around. After working my way around the ring 2-3 times it came loose in my hand without breaking. I then installed the new one by pressing it into place with the same retaining studs that gripped ring into place. I installed this new one by also going around the ring 2-3 times and installed by hitting with my... Read more

I ordered a new interface display assembly to replace the cracked/broken face plate. You have to replace the whole interface display as the face plate is built integral with the interface. There is no option to just replace the plastic. The repair was extremely easy and involved prying off the old display with a flat head screwdriver, unplugging the old display, plugging in the new display and snapping it back into position. Instructions were included with the part I ordered. The whole... Read more

Ordered the new interface display - this must be the easiest refrigerator repair possible. My version popped right off without even a screw (some models have a screw). There are 3 different sizes of connector to disconnect and hook up to the new board - so you really can't mess that up. Read more

Replaced interface display and main control board. I saw videos and asked for some help from the store. Information on your web site helped. Specially about the dimming light on the display assembly is an indication of main board went bad. I used a patty knife to remove the front panel around the interface display as suggested by your rep. EXCELLENT SERVICE AND DELIVERY. Read more