Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Psd285ordc3 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dishwasher Door Gasket
Genuine Ge part
By: Ge
Part Number: WD08X10016

Creates a watertight seal around your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or leaking. Verify fit with your model.

Do-It-Yourself Stories from Customers like You Dishwarsher door gasket was worn out   Richard K. • Clayton , OH • August 18, 2014

Ordered new one online. It came in 2 days with instructions. I installed it and works great. Read more

More
$36.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Dishwasher Door Cable
Genuine Ge part
By: Ge
Part Number: WD7X14

The Dishwasher Door Cable is an OEM replacement part for GE dishwashers. It works with the door latch assembly to ensure secure closure of the dishwasher door. The cable is responsible for connecting the door handle mechanism to the latch, allowing users to easily open and close the door with a gentle pull or push. Note: It is recommended to replace both at the same time.

Symptoms of a bad door cable include: 

  • The door not fully latching or staying closed securely
  • Excessive movement or play of the door when closed
  • The cable becoming worn, frayed, or detached

Causes of a bad cable can be frequent use that results in wear and fatigue of the internal wiring over time. Damage from harsh detergents or excess moisture can also compromise the cable.

This OEM GE replacement part is compatible with models from Hotpoint, RCA, and some Kenmore dishwashers as well.

This part fixes the following symptoms
  • Door latch failure
See more...
Do-It-Yourself Stories from Customers like You Soap dispenser wouldn't close door kept falling down   Graeme M. • Branford , CT • October 07, 2017

First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more

More
$28.52

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Door Closer Cam
Genuine Whirlpool part
By: Whirlpool
Part Number: 61003647

Replaces worn or broken refrigerator door closer cam that installs at the bottom hinge. Restores smooth door action when the original is cracked or damaged.

Do-It-Yourself Stories from Customers like You Door not closing properly   Dan T. • Boring , OR • January 03, 2015

Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes. Read more

More
$6.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Lower Spray Arm Assembly
Genuine Ge part
By: Ge
Part Number: WD35X10011

White dishwasher lower spray arm assembly with collapsible tower. Replaces cracked, broken, or damaged spray arms. Installs at bottom of tub.

Do-It-Yourself Stories from Customers like You 1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6   James W. • San Diego , CA • March 19, 2017

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

More
$53.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Drain Tube Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB8381501

Seals the drain tube connection to prevent leaks and ice buildup in your freezer. Replace if you see water pooling or ice forming at the freezer bottom.

Do-It-Yourself Stories from Customers like You Ice buildup in freezer   Alex C. • Hartsdale , NY • April 10, 2020

Replaced clogged drain tube. Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Light Socket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119935

Replaces a worn or heat-damaged refrigerator light socket to restore interior lighting. Install when bulbs won't light despite replacement. Confirm fit by model number.

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You The bulb was not working   Camille M. • Kew Gardens , NY • May 06, 2015

I bought a new bulb but it did not work. Then the super looked at it and realized the socket was not good. Read more

More
$50.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Ice Stripper (Ejector)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124

Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:

  • Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
  • Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
  • Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
  • A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
  • Disconnect power to the appliance before starting any repair to avoid electrical shock.
  • Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
  • Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
  • After installation, restore power and run a test harvest cycle to ensure proper cube ejection.

Do-It-Yourself Stories from Customers like You One of the teeth on the ice stripper was broken off   Michelle F. • Hines , OR • August 07, 2014

Simply replaced the broken ice stripper with a new one. Read more

More
$47.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Icemaker Fill Tube Elbow
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003576

Right-angle elbow that connects the water supply line to the icemaker fill tube. Replace if cracked, leaking, or broken to restore a sealed connection.

More
$42.28

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Sump Cap
Genuine Ge part
By: Ge
Part Number: WD12X418

Fix dishwasher leaks or poor cleaning with a new sump cap. Seals the sump opening to contain wash water and protect the pump. Quick DIY replacement.

Do-It-Yourself Stories from Customers like You 1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6   James W. • San Diego , CA • March 19, 2017

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

More
$24.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WD2X295

Size: 8-16 x 2 inch ss.

More
$9.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Thermostat Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522

This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.

  • Holds the thermostat firmly against the evaporator line for proper temperature feedback
  • Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
  • Restores correct mounting when the original clip is cracked, bent, or missing
  • Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
  • Disconnect power to the appliance before servicing; wear cut-resistant gloves
  • Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
  • Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
  • Confirm a secure fit and proper wire routing before reassembling and restoring power

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Sump Tray (White)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67004123

This white sump tray captures and channels dishwasher wash and drain water to the drain pump, helping prevent leaks and protect the tub assembly. It's a direct-replacement plastic tray used in the lower cavity. What it does:

  • Collects and routes standing water to the drain pump to support normal drainage.
  • Provides a mounting/containment area for the pump and related drain components.
  • Helps prevent water from reaching electronic components and the cabinet floor.
  • Commonly replaced when the tray cracks, warps, or is visibly leaking.
What's included: One white sump tray. Install notes:
  • Disconnect power and water supply before beginning any repair.
  • Handle sharp sheet-metal edges inside the tub; wear gloves and eye protection.
  • After reassembly, run a short cycle and check for proper drainage and leaks.

More
$56.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Seal Strip (Door)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP854334

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

  • Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
  • Helps prevent moisture buildup and improves energy efficiency when sealing is restored
  • Reduces rattling and vibration caused by a compressed or torn seal edge
  • Commonly replaced when the strip is torn, missing, or no longer adheres properly
What's included:
  • One seal strip
Install notes:
  • Disconnect power to the appliance before servicing to avoid electrical or burn hazards
  • Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
  • Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

More
$8.60

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Ice Maker Ejector Arm
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627843

Ice cubes stuck in tray and won't eject? This ejector arm pushes ice from the mold into the bin. Simple snap-in install restores ice production.

More
$50.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Large Crisper Drawer Frame Trim
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67002723

Replace your cracked or broken refrigerator crisper drawer frame trim. This structural part supports the crisper drawer and restores proper alignment.

Do-It-Yourself Stories from Customers like You Frame for the crisper drawer broke   Ronald P. • Islip , NY • June 26, 2015

Ordered new frame & installed it Read more

More
$92.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dishwasher Flood Switch Mounting Bracket
Genuine Ge part
By: Ge
Part Number: WD12X10023

Replacement bracket that secures the flood switch in your dishwasher. Holds the leak detection switch in proper position. Needed when bracket is cracked or broken.

More
$19.61

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google